1,199 research outputs found
On Neuromechanical Approaches for the Study of Biological Grasp and Manipulation
Biological and robotic grasp and manipulation are undeniably similar at the
level of mechanical task performance. However, their underlying fundamental
biological vs. engineering mechanisms are, by definition, dramatically
different and can even be antithetical. Even our approach to each is
diametrically opposite: inductive science for the study of biological systems
vs. engineering synthesis for the design and construction of robotic systems.
The past 20 years have seen several conceptual advances in both fields and the
quest to unify them. Chief among them is the reluctant recognition that their
underlying fundamental mechanisms may actually share limited common ground,
while exhibiting many fundamental differences. This recognition is particularly
liberating because it allows us to resolve and move beyond multiple paradoxes
and contradictions that arose from the initial reasonable assumption of a large
common ground. Here, we begin by introducing the perspective of neuromechanics,
which emphasizes that real-world behavior emerges from the intimate
interactions among the physical structure of the system, the mechanical
requirements of a task, the feasible neural control actions to produce it, and
the ability of the neuromuscular system to adapt through interactions with the
environment. This allows us to articulate a succinct overview of a few salient
conceptual paradoxes and contradictions regarding under-determined vs.
over-determined mechanics, under- vs. over-actuated control, prescribed vs.
emergent function, learning vs. implementation vs. adaptation, prescriptive vs.
descriptive synergies, and optimal vs. habitual performance. We conclude by
presenting open questions and suggesting directions for future research. We
hope this frank assessment of the state-of-the-art will encourage and guide
these communities to continue to interact and make progress in these important
areas
Feasibility of Manual Teach-and-Replay and Continuous Impedance Shaping for Robotic Locomotor Training Following Spinal Cord Injury
Robotic gait training is an emerging technique for retraining walking ability following spinal cord injury (SCI). A key challenge in this training is determining an appropriate stepping trajectory and level of assistance for each patient, since patients have a wide range of sizes and impairment levels. Here, we demonstrate how a lightweight yet powerful robot can record subject-specific, trainer-induced leg trajectories during manually assisted stepping, then immediately replay those trajectories. Replay of the subject-specific trajectories reduced the effort required by the trainer during manual assistance, yet still generated similar patterns of muscle activation for six subjects with a chronic SCI. We also demonstrate how the impedance of the robot can be adjusted on a step-by-step basis with an error-based, learning law. This impedance-shaping algorithm adapted the robot's impedance so that the robot assisted only in the regions of the step trajectory where the subject consistently exhibited errors. The result was that the subjects stepped with greater variability, while still maintaining a physiologic gait pattern. These results are further steps toward tailoring robotic gait training to the needs of individual patients
Smart hands for the EVA retriever
Dexterous, robotic hands are required for the extravehicular activity retriever (EVAR) system being developed by the NASA Johnson Space Center (JSC). These hands, as part of the EVAR system, must be able to grasp objects autonomously and securely which inadvertently separate from the Space Station. Development of the required hands was initiated in 1987. Outlined here are the hand development activities, including design considerations, progress to date, and future plans. Several types of dexterous hands that were evaluated, along with a proximity-sensing capability that was developed to initiate a reflexive, adaptive grasp, are described. The evaluations resulted in the design and fabrication of a 6-degree-of-freedom (DOF) hand that has two fingers and a thumb arranged in an anthropomorphic configuration. Finger joint force and position sensors are included in the design, as well as infrared proximity sensors which allow initiation of the grasp sequence when an object is detected within the grasp envelope
Impedence Control for Variable Stiffness Mechanisms with Nonlinear Joint Coupling
The current discussion on physical human robot
interaction and the related safety aspects, but also the interest
of neuro-scientists to validate their hypotheses on human motor
skills with bio-mimetic robots, led to a recent revival of tendondriven
robots. In this paper, the modeling of tendon-driven
elastic systems with nonlinear couplings is recapitulated. A
control law is developed that takes the desired joint position
and stiffness as input. Therefore, desired motor positions are
determined that are commanded to an impedance controller.
We give a physical interpretation of the controller. More importantly,
a static decoupling of the joint motion and the stiffness
variation is given. The combination of active (controller) and
passive (mechanical) stiffness is investigated. The controller
stiffness is designed according to the desired overall stiffness.
A damping design of the impedance controller is included in
these considerations. The controller performance is evaluated
in simulation
Nonlinear robust control of tendon–driven robot manipulators
This work addresses the position tracking control problem for tendon–driven robotic mechanisms in the presence of parametric uncertainty and additive external disturbances. Specifically, a full state feedback nonlinear robust controller is proposed to tackle the link position tracking problem for tendon–driven robot manipulators with uncertain dynamical system parameters. A robust backstepping approach has been utilized to achieve uniformly ultimately bounded tracking performance despite the lack of exact knowledge of the dynamical parameters and presence of additive but bounded disturbance terms. Stability of the overall system is proven via Lyapunov based arguments. Simulation studies performed on a two link planar robot manipulator driven by a six tendon mechanism are presented to illustrate the effectiveness and viability of the proposed approach.Scientific and Technological Research Council of Turkey (112E561
The SmartHand transradial prosthesis
<p>Abstract</p> <p>Background</p> <p>Prosthetic components and control interfaces for upper limb amputees have barely changed in the past 40 years. Many transradial prostheses have been developed in the past, nonetheless most of them would be inappropriate if/when a large bandwidth human-machine interface for control and perception would be available, due to either their limited (or inexistent) sensorization or limited dexterity. <it>SmartHand </it>tackles this issue as is meant to be clinically experimented in amputees employing different neuro-interfaces, in order to investigate their effectiveness. This paper presents the design and on bench evaluation of the SmartHand.</p> <p>Methods</p> <p>SmartHand design was bio-inspired in terms of its physical appearance, kinematics, sensorization, and its multilevel control system. Underactuated fingers and differential mechanisms were designed and exploited in order to fit all mechatronic components in the size and weight of a natural human hand. Its sensory system was designed with the aim of delivering significant afferent information to the user through adequate interfaces.</p> <p>Results</p> <p>SmartHand is a five fingered self-contained robotic hand, with 16 degrees of freedom, actuated by 4 motors. It integrates a bio-inspired sensory system composed of 40 proprioceptive and exteroceptive sensors and a customized embedded controller both employed for implementing automatic grasp control and for potentially delivering sensory feedback to the amputee. It is able to perform everyday grasps, count and independently point the index. The weight (530 g) and speed (closing time: 1.5 seconds) are comparable to actual commercial prostheses. It is able to lift a 10 kg suitcase; slippage tests showed that within particular friction and geometric conditions the hand is able to stably grasp up to 3.6 kg cylindrical objects.</p> <p>Conclusions</p> <p>Due to its unique embedded features and human-size, the SmartHand holds the promise to be experimentally fitted on transradial amputees and employed as a bi-directional instrument for investigating -during realistic experiments- different interfaces, control and feedback strategies in neuro-engineering studies.</p
- …