2,221 research outputs found

    Fuzzy logic based equivalent consumption optimization of a hybrid electric propulsion system for unmanned aerial vehicles

    Get PDF
    This paper presents an energy management strategy for a hybrid electric propulsion system designed for unmanned aerial vehicles. The proposed method combines the Equivalent Consumption Minimization Strategy (ECMS) and fuzzy logic control, thereby being named Fuzzy based ECMS (F-ECMS). F-ECMS can solve the issue that the conventional ECMS cannot sustain the battery state-of-charge for on-line applications. Furthermore, F-ECMS considers the aircraft safety and guarantees the aircraft landing using the remaining electrical energy if the engine fails. The main contribution of the paper is to solve the deficiencies of ECMS and take into consideration the aircraft safely landing, by implementing F-ECMS. Compared with the combustion propulsion system, the hybrid propulsion system with F-ECMS at least reduces 11% fuel consumption for designed flight missions. The advantages of F-ECMS are further investigated by comparison with the conventional ECMS, dynamic programming and adaptive ECMS. In contrast with ECMS and dynamic programming, F-ECMS can accomplish a balance between sustaining the battery state-of-charge and electric energy consumption. F-ECMS is also superior to the adaptive ECMS because there are less fuel consumption and lower computational cost

    Implementation Of Fuzzy Logic Control Into An Equivalent Minimization Strategy For Adaptive Energy Management Of A Parallel Hybrid Electric Vehicle

    Get PDF
    As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Electric vehicles have been introduced by the industry, showing promising signs of reducing emissions production in the automotive sector. However, many consumers may be hesitant to purchase fully electric vehicles due to several uncertainty variables including available charging stations. Hybrid electric vehicles (HEVs) have been introduced to reduce problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in a vehicle. A large section in the software development process is the implementation of an optimal energy management strategy meant to improve the overall fuel efficiency of the vehicle. Optimal strategies can be implemented when driving conditions are known a prior. The Equivalent Consumption Minimization Strategy (ECMS) is an optimal control strategy that uses an equivalence factor to equate electrical to mechanical power when performing torque split determination between the internal combustion engine and electric motor for propulsive and regenerative torque. This equivalence factor is determined from offline vehicle simulations using a sensitivity analysis to provide optimal fuel economy results while maintaining predetermined high voltage battery state of charge (SOC) constraints. When the control hierarchy is modified or different driving styles are applied, the analysis must be redone to update the equivalence factor. The goal of this work is to implement a fuzzy logic controller that dynamically updates the equivalence factor to improve fuel economy, maintain a strict charge sustaining window of operation for the high voltage battery, and reduce computational time required during algorithm development. The adaptive algorithm is validated against global optimum fuel economy and charge sustaining results from a sensitivity analysis performed for multiple drive cycles. Results show a maximum fuel economy improvement of 9.82% when using a mild driving style and a 95% success rate when maintaining an ending SOC within 5% regardless of starting SOC. Recommendations for modification of the fuzzy logic controller are made to produce additional fuel economy and charge sustaining benefits from the parallel hybrid vehicle model

    Enhancing Performance of Hybrid Electric Vehicle using Optimized Energy Management Methodology

    Get PDF
    The fuel consumption and the fuel management strategy (PMS) of the hybrid electric vehicle are closely linked (HEV). In this study, a hybrid power management technique and an adaptive neuro-fuzzy inference (ANFIS) method are established. Artificial intelligence represents a huge improvement in electricity management across different energy sources (AI). The main energy source of the hybrid power supply is a proton exchange membrane fuel cell (PEMFC), while its electrical storage devices are a battery bank and an ultracapacitor. The hybrid electric vehicle's power management strategy (PMS) and fuel consumption are closely related (HEV). In this paper, an adaptive neuro-fuzzy inference and hybrid power management strategy (ANFIS) approach is developed. A significant advance in electricity management across multiple energy sources is artificial intelligence (AI). The proton exchange membrane fuel cell (PEMFC) serves as the primary energy source of the hybrid power supply, and the ultracapacitor and battery bank serve as its electrical storage components

    Real-time energy management for diesel heavy duty hybrid electric vehicles

    Get PDF
    In this paper, a fuzzy-tuned equivalent consumption minimization strategy (F-ECMS) is proposed as an intelligent real-time energy management solution for a conceptual diesel engine-equipped heavy duty hybrid electric vehicle (HEV). In the HEV, two electric motors/generators are mounted on the turbocharger shaft and engine shaft, respectively, which can improve fuel efficiency by capturing and storing energy from both regenerative braking and otherwise wasted engine exhaust gas. The heavy duty HEV frequently involved in duty cycles characterized by start-stop events, especially in off-road applications, whose dynamics is analyzed in this paper. The on-line optimization problem is formulated as minimizing a cost function in terms of weighted fuel power and electric power. In the cost function, a cost factor is defined for both improving energy transmission efficiency and maintaining the battery energy balance. To deal with the nonexplicit relationship between HEV fuel economy, battery state of charge (SOC), and control variables, the cost factor is fuzzy tuned using expert knowledge and experience. In relation to the fuel economy, the air-fuel ratio is an important factor. An online search for capable optimal variable geometry turbocharger (VGT) vane opening and exhaust gas recirculation (EGR) valve opening is also necessary. Considering the exhaust emissions regulation in diesel engine control, the boundary values of VGT and EGR actuators are identified by offline design-of-experiment tests. An online rolling method is used to implement the multivariable optimization. The proposed method is validated via simulation under two transient driving cycles, with the fuel economy benefits of 4.43% and 6.44% over the nonhybrid mode, respectively. Compared with the telemetry equivalent consumption minimization strategy, the proposed F-ECMS shows better performance in the sustainability of battery SOC under driving conditions with the rapid dynamics often associated with off-road applications

    Design and Optimization of the Power Management Strategy of an Electric Drive Tracked Vehicle

    Get PDF
    This article studies the power management control strategy of electric drive system and, in particular, improves the fuel economy for electric drive tracked vehicles. Combined with theoretical analysis and experimental data, real-time control oriented models of electric drive system are established. Taking into account the workloads of engine and the SOC (state of charge) of battery, a fuzzy logic based power management control strategy is proposed. In order to achieve a further improvement in fuel economic, a DEHPSO algorithm (differential evolution based hybrid particle swarm optimization) is adopted to optimize the membership functions of fuzzy controller. Finally, to verify the validity of control strategy, a HILS (hardware-in-the-loop simulation) platform is built based on dSPACE and related experiments are carried out. The results indicate that the proposed strategy obtained good effects on power management, which achieves high working efficiency and power output capacity. Optimized by DEHPSO algorithm, fuel consumption of the system is decreased by 4.88% and the fuel economy is obviously improved, which will offer an effective way to improve integrated performance of electric drive tracked vehicles

    Optimal Control of Electrified Powertrains in Offline and Online Application Concerning Dimensioning of Li-Ion Batteries

    Get PDF
    Various energy management systems (driving strategies) have been developed to improve the efficiency of electrified vehicle drives. These include strategies from the field of offline optimization to determine the theoretical optimum for a given system, as well as online strategies designed for an on-board application in the vehicle. In this paper, investigations are performed on an SUV electrified by a 48 V hybrid system in P14 topology regarding both offline and online strategies. To calculate the global optimum, the performance of Dynamic Programming (DP) compared to an Equivalent Consumption Minimization Strategy (ECMS) with an iteratively determined equivalence factor is shown. Furthermore, with regard to online energy management strategies (EMS), it is presented how a predictive Online ECMS achieves additional fuel savings compared to a robust, non-predictive implementation. The simulation-based vehicle development allows detailed investigations regarding interactions between battery requirements and EMS. In this context, it is shown how various battery capacities are exploited by the discussed EMS

    Efficient Thermal Electric Skipping Strategy Applied to the Control of Series/Parallel Hybrid Powertrain

    Get PDF
    The optimal control of hybrid powertrains represents one of the most challenging tasks for the compliance with the legislation concerning CO2 and pollutant emission of vehicles. Most common off-line optimization strategies (Pontryagin minimum principle-PMP-or dynamic programming) allow to identify the optimal control along a predefined driving mission at the expense of a quite relevant computational effort. On-line strategies, suitable for on-vehicle implementation, involve a certain performance degradation depending on their degree of simplification and computational effort. In this work, a simplified control strategy is presented, where the conventional power-split logics, typical of the above-mentioned strategies, is here replaced with an alternative utilization of the thermal and electric units for the vehicle driving (Efficient Thermal Electric Skipping Strategy-ETESS). The choice between the units is realized at each time and is based on the comparison between the effective fuel rate of the thermal engine and an equivalent fuel rate related to the electrical power consumption. The equivalent fuel rate in a pure electric driving is associated to a combination of brake specific fuel consumption of the thermal engine, and electro-mechanical efficiencies along the driveline. The ETESS is applied for the simulation of segment C hybrid vehicle, equipped with a thermal engine and two electric units (motor and generator). The methodology is tested along regulatory driving cycles (WLTP, Artemis) and RDE, with different powertrain variants. Numerical results underline that the proposed approach performs very close to most common control strategies (consumed fuel per kilometer higher than PMP of about 1% on average). The main advantage is a reduced computational effort (decrease of 99% on average). The ETESS is straightforwardly adapted for an on-line implementation, through the introduction of an adaptative factor, preserving the computational effort and the fuel economy

    Assessment of an Adaptive Efficient Thermal/Electric Skipping Control Strategy for the Management of a Parallel Plug-in Hybrid Electric Vehicle

    Get PDF
    In the current scenario, where environmental concern determines the evolution of passenger cars, hybrid electric vehicles (HEV) represent a hub in the automotive sector to reach net-zero CO2 emissions. To fully exploit the energy conversion potential of advanced powertrains, proper energy management strategies are mandatory. In this work, a simulation study is presented, aiming at developing a new control strategy for a P3 parallel plug-in HEV (PHEV). The simulation model is built on MATLAB/Simulink. The proposed strategy is based on an alternative utilization of the thermal engine and electric motor to provide the vehicle power demand (efficient thermal/electric skipping strategy (ETESS)). An adaptive function is then introduced to develop a charge-blended control strategy. Fuel consumption along different driving cycles is evaluated by applying the novel adaptive-ETESS (A-ETESS). To have a proper comparison, the same adaptive function is built on the equivalent consumption minimization strategy (ECMS). Processor-in-the-loop (PIL) simulations are performed to benchmark the A-ETESS. Simulation results highlighted that the proposed strategy provides for a fuel economy similar to ECMS (worse of about 2.5% on average) and a computational effort reduced by 99% on average, opening the possibility of real-time on-vehicle applications
    corecore