803 research outputs found
Handover evaluation of UMTS-WiMAX networks
Recently, data traffic movement through a wireless channel is assisted by suggesting and implementing many mechanisms, to achieve the speedy increasing importunity and popularity of the wireless networks. Various wireless technologies can be copulated to develop a heterogeneous network, which is a candidate towards (4G) networks. OPNET modeler (14.5) is used to design simulation modules of the heterogeneous network. During device connection between the worldwide interoperability for microwave access (WiMAX) and universal mobile telecommunication system (UMTS) networks, Performance metrics such as; Jitter end-to-end delay (E-2-E) Throughput is used. The results of the simulation are measured to determine the efficiency of the transfer using WiMAX-UMTS according to the selected metrics. The WiMAX-UMTS has shown valuable improvement in Process Durability, reduction of E-2-E delay, and Jitter. The maximum amount of data transfer and the least amount of delay and Jitter is at 250 sec. Because of the handover operations and data transfer momentum, the worst-case passes in the network when 618 sec is the minimum amount. The efficiency of throughput for WiMAX equal to 0.092666% as for the efficiency of throughput for UMTS equal to 4.633333*10-6 % whereas the E-2-E efficiency a delay equal to 0.5466%
Wireless Technologies for IoT in Smart Cities
[EN] As cities continue to grow, numerous initiatives for Smart Cities are being conducted. The
concept of Smart City encompasses several concepts being governance, economy,
management, infrastructure, technology and people. This means that a Smart City can have
different communication needs. Wireless technologies such as WiFi, ZigBee, Bluetooth,
WiMax, 4G or LTE (Long Term Evolution) have presented themselves as solutions to the
communication needs of Smart City initiatives. However, as most of them employ unlicensed
bands, interference and coexistence problems are increasing. In this paper, the wireless
technologies available nowadays for IoT (Internet of Things) in Smart Cities are presented.
Our contribution is a review of wireless technologies, their comparison and the problems that
difficult coexistence among them. In order to do so, the characteristics and adequacy of
wireless technologies to each domain are considered. The problems derived of over-crowded
unlicensed spectrum and coexistence difficulties among each technology are discussed as
well. Finally, power consumption concerns are addressed.GarcĂa-GarcĂa, L.; Jimenez, JM.; Abdullah, MTA.; Lloret, J. (2018). Wireless Technologies for IoT in Smart Cities. Network Protocols and Algorithms. 10(1):23-64. doi:10.5296/npa.v10i1.12798S236410
Adaptive buffer power save mechanism for mobile multimedia streaming
With the proliferation of wireless networks, the use of mobile devices to stream multimedia is growing in popularity. Although the devices are improving in that they are becoming smaller, more complex and capable of running more applications than ever before, there is one aspect of them that is lagging behind. Batteries have seen little development, even though they are one of the most important parts of the devices.
Multimedia streaming puts extra pressure on batteries, causing them to discharge faster. This often means that streaming tasks can not be completed, resulting in significant user dissatisfaction. Consequently, effort is required to devise mechanisms to enable and increase in battery life while streaming multimedia.
In this context, this thesis presents a novel algorithm to save power in mobile devices during the streaming of multimedia content. The proposed Adaptive-Buffer Power Save Mechanism (AB-PSM) controls how the data is sent over wireless networks, achieving significant power savings. There is little or no effect on the user and the algorithm is very simple to implement. The thesis describes tests which show the effectiveness of AB-PSM in comparison with the legacy power save mechanism present in IEEE 802.11.
The thesis also presents a detailed overview of the IEEE 802.11 protocols and an in-depth literature review in the area of power saving during multimedia streaming. A novel analysis of how the battery of a mobile device is affected by multimedia streaming in its different stages is given. A total-power-save algorithm is then described as a possible extension to the Adaptive-Buffer Power Save Mechanism
New High-Speed Directional Relay Based on Wireless Sensor Network for Smart Grid Protection
The production of energy from water represents large amounts of clean and renewable energy. However, only 30% of this energy has been developed so far. Hydropower, particularly hydropower plants, is not only environmentally friendly but also economical, and operates more efficiently than any other renewable energy system. Hydropower plants are largely automated and have relatively low operating costs. The main components of the power system must be continuously monitored and protected to maintain the quality and reliability of the power source. This task is provided by the data collection, monitoring and protection system. Turbines must be protected not only by short circuits but also by abnormal conditions. The proposed protection has been designed to avoid damaging the original power (motor or turbine), this usually happens when the generator fails, and the machine operates as a synchronous motor connected to the power system. In this case, the generator becomes an active load, causing a rise in temperature and severe damage to the main turbine, and hence it becomes a need to quickly detect these conditions. This study proposes a new controller for Neuro-Fuzzy to prevent reverse power flow and to keep the quality and reliability of supply. Fuzzy system network has attracted various scientific and engineering researchers. The new feature of this work is to adjust the membership function as a reverse mechanism derived of the Fuzzy Logic Controller. The smart meter network is the basis of the smart grid. In this study, smart grid meters were implemented using ZigBee technology based on wireless sensor networks. The ZigBee network of wireless sensors due to its low battery, low power consumption, become more useful than other wireless communication systems to provide a high-performance measurement. This study shows the ZigBee network using the OPNET simulation. Depending on the performance, parameters were analysed to understand the operating characteristics of the star, tree, and mesh
Recommended from our members
Scalable base station switching framework for green cellular networks
With the recent unprecedented growth in the wireless market, network operators are obliged not only to find new techniques including dense deployment of base stations (BSs) in order to support high data rate services and high user density, but also to reduce the operating costs and energy consumption of various network elements. To solve these challenges, powering down certain BSs during low-traffic periods, so-called BS sleeping, has emerged as an effective green communications paradigm. While BS sleeping offers the potential to significantly lower energy consumption, it also raises many challenges, since when a BS is switched off, this can lead to, for example, coverage holes, sudden degradation in quality of service (QoS), higher transmit power dissipation in off-cell mobile stations (MSs), an inability to rapidly power up/down equipment and finally, a failure to uphold regulatory requirements. In order to realise greener network designs which both maximise energy savings whilst guaranteeing QoS, innovative BS switching mechanisms need to be developed.
This thesis presents a novel BS switching framework which improves energy efficiency (EE) in comparison with existing approaches, while guaranteeing the minimum QoS and seamless services. The major technical contributions in this framework are: i) a new BS to relay station (RS) switching model where certain BSs are switched to RS mode rather than being turned off, firstly using a fixed threshold based switching algorithm utilizing temporal traffic diversity, and ii) then subsequently by means of an adaptive threshold by exploiting the inherently asymmetric traffic profile between cells, i.e., by exploiting both the temporal and spatial traffic diversity; iii) a traffic-and-interference-aware BS switching strategy that considers the impact of inter-cell interference in the decision making process to dynamically determine the best BS set to be kept active for improved EE; and finally iv) a novel scalable multimode BS switching model which enables each BS to operate in different power modes i.e., macro/micro/sleep to explore energy savings potential even at higher traffic conditions.
The thesis findings conclusively confirm this new BS switching framework provides significant EE improvements from both BS and MS perspectives, under diverse network conditions and represents a notable step towards greener communications
Traffic-Driven Energy Efficient Operational Mechanisms in Cellular Access Networks
Recent explosive growth in mobile data traffic is increasing energy consumption in cellular networks at an incredible rate. Moreover, as a direct result of the conventional static network provisioning approach, a significant amount of electrical energy is being wasted in the existing networks. Therefore, in recent time, the issue of designing energy efficient cellular networks has drawn significant attention, which is also the foremost motivation behind this research. The proposed research is particularly focused on the design of self-organizing type traffic-sensitive dynamic network reconfiguring mechanisms for energy efficiency in cellular systems. Under the proposed techniques, radio access networks (RANs) are adaptively reconfigured using less equipment leading to reduced energy utilization. Several energy efficient cellular network frameworks by employing inter-base station (BS) cooperation in RANs are proposed. Under these frameworks, based on the instantaneous traffic demand, BSs are dynamically switched between active and sleep modes by redistributing traffic among them and thus, energy savings is achieved. The focus is then extended to exploiting the availability of multiple cellular networks for extracting energy savings through inter-RAN cooperation. Mathematical models for both of these single-RAN and multi-RAN cooperation mechanisms are also formulated. An alternative energy saving technique using dynamic sectorization (DS) under which some of the sectors in the underutilized BSs are turned into sleep mode is also proposed. Algorithms for both the distributed and the centralized implementations are developed. Finally, a two-dimensional energy efficient network provisioning mechanism is proposed by jointly applying both the DS and the dynamic BS switching. Extensive simulations are carried out, which demonstrate the capability of the proposed mechanisms in substantially enhancing the energy efficiency of cellular networks
Wireless body sensor networks for health-monitoring applications
This is an author-created, un-copyedited version of an article accepted for publication in
Physiological Measurement. The publisher is
not responsible for any errors or omissions in this version of the manuscript or any version
derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01
Mobility and Handoff Management in Wireless Networks
With the increasing demands for new data and real-time services, wireless
networks should support calls with different traffic characteristics and
different Quality of Service (QoS)guarantees. In addition, various wireless
technologies and networks exist currently that can satisfy different needs and
requirements of mobile users. Since these different wireless networks act as
complementary to each other in terms of their capabilities and suitability for
different applications, integration of these networks will enable the mobile
users to be always connected to the best available access network depending on
their requirements. This integration of heterogeneous networks will, however,
lead to heterogeneities in access technologies and network protocols. To meet
the requirements of mobile users under this heterogeneous environment, a common
infrastructure to interconnect multiple access networks will be needed. In this
chapter, the design issues of a number of mobility management schemes have been
presented. Each of these schemes utilizes IP-based technologies to enable
efficient roaming in heterogeneous network. Efficient handoff mechanisms are
essential for ensuring seamless connectivity and uninterrupted service
delivery. A number of handoff schemes in a heterogeneous networking environment
are also presented in this chapter.Comment: 28 pages, 11 figure
Design and Analysis of Green Mission-Critical Fiber-Wireless Broadband Access Networks
In recent years, the ever-increasing environmental friendliness concern has made energy efficiency in telecom networks as an important theme in their operations. Meanwhile, mission-critical (MC) services and systems (such as healthcare, police, and firefighting) have been acquiring special attention from telecom designers and operators. The currently deployed MC network technologies are indigent in terms of bandwidth capacity, and thus they are not able to support the emerging MC multimedia applications. Therefore in this thesis, we first explore the possibility of provisioning the MC services over the integration of fiber-wireless (FiWi) technologies, which has been considered as a promising candidate for the deployment of high-speed and mobile broadband access networks. We then investigate the energy efficiency problem in the FiWi integration, which consists of WiMAX in the wireless plane, and of Ethernet Passive Optical Network (EPON) - the most popular variant of the next-generation PON (NG-PON) technology, in the optical plane. In WiMAX, the energy saving protocol has been extensively investigated and standardized. Conversely, it has been recently studied in NG-PON, which currently consumes the least power among all the high-speed access networks. However, NG-PON has notably matured in the past few years and is envisioned to massively evolve in the near future. This trend will increase the power requirements of NG-PON and make it no longer coveted. Therefore we address the energy efficiency problem in NG-PON.
For each of our contributions, we conduct extensive simulations to demonstrate the effectiveness and advantages of the proposed solutions
- âŚ