On multi-user EXIT chart analysis aided turbo-detected MBER beamforming designs

Abstract—This paper studies the mutual information transfer characteristics of a novel iterative soft interference cancellation (SIC) aided beamforming receiver communicating over both additive white Gaussian noise (AWGN) and multipath slow fading channels. Based on the extrinsic information transfer (EXIT) chart technique, we investigate the convergence behavior of an iterative minimum bit error rate (MBER) multiuser detection (MUD) scheme as a function of both the system parameters and channel conditions in comparison to the SIC aided minimum mean square error (SIC-MMSE) MUD. Our simulation results show that the EXIT chart analysis is sufficiently accurate for the MBER MUD. Quantitatively, a two-antenna system was capable of supporting up to K=6 users at Eb/N0=3dB, even when their angular separation was relatively low, potentially below 20?. Index Terms—Minimum bit error rate, beamforming, multiuser detection, soft interference cancellation, iterative processing, EXIT chart

Optimal cross layer design for CDMA-SFBC wireless systems

The demand for high speed reliable wireless services has been rapidly growing. Wireless networks have limited resources while wireless channels suffer from fading, interference and time variations. Furthermore, wireless applications have diverse end to end quality of service (QoS) requirements. The aforementioned challenges require the design of spectrally efficient transmission systems coupled with the collaboration of the different OSI layers i.e. cross layer design. To this end, we propose a code division multiple access (CDMA)-space frequency block coded (SFBC) systems for both uplink and downlink transmissions. The proposed systems exploit code, frequency and spatial diversities to improve reception. Furthermore, we derive closed form expressions for the average bit error rate of the proposed systems. In this thesis, we also propose a cross layer resource allocation algorithm for star CDMA-SFBC wireless networks. The proposed resource allocation algorithm assigns base transceiver stations (BTS), antenna arrays and frequency bands to users based on their locations such that their pair wise channel cross correlation is minimized while each user is assigned channels with maximum coherence time. The cooperation between the medium access control (MAC) and physical layers as applied by the optimized resource allocation algorithm improves the bit error rate of the users and the spectral efficiency of the network. A joint cross layer routing and resource allocation algorithm for multi radio CDMA-SFBC wireless mesh networks is also proposed in this thesis. The proposed cross layer algorithm assigns frequency bands to links to minimize the interference and channel estimation errors experienced by those links. Channel estimation errors are minimized by selecting channels with maximum coherence time. On top, the optimization algorithm routes network traffic such that the average end to end packet delay is minimized while avoiding links with high interference and short coherence time. The cooperation between physical, MAC and network layers as applied by the optimization algorithm provides noticeable improvements in average end to end packet delay and success rat

Iterative Soft Interference Cancellation Aided Minimum Bit Error Rate Uplink Receiver Beamforming

Iterative multiuser receivers constitute an effective solution for transmission over Multiple Access Interference (MAI) infested channels, when invoking a combined multiuser detector and channel decoder. Most reduced-complexity methods in this area use the Complex-valued Minimum Mean Squared Error (CMMSE) Multiuser Detector (MUD). Since the desired output of BPSK systems is real-valued, minimizing the Mean Square Error (MSE) between the beamformer’s desired output and the real part of the beamformer output has the potential of significantly improving the attainable Bit Error Rate (BER) performance. We refer to this MMSE design as the Real-valued MMSE (RMMSE) receiver. In this paper, we explore a new Soft-Input Soft-Output (SISO) interference cancellation multiuser detection algorithm based on the novel Minimum BER (MBER) criterion. We demonstrate that the MBER turbo receiver outperforms both the CMMSE and the RMMSE algorithms, particularly in so-called ‘overloaded’ beamforming systems, where the number of receiver antennas is lower than the number of users supported

MIMO-aided near-capacity turbo transceivers: taxonomy and performance versus complexity

In this treatise, we firstly review the associated Multiple-Input Multiple-Output (MIMO) system theory and review the family of hard-decision and soft-decision based detection algorithms in the context of Spatial Division Multiplexing (SDM) systems. Our discussions culminate in the introduction of a range of powerful novel MIMO detectors, such as for example Markov Chain assisted Minimum Bit-Error Rate (MC-MBER) detectors, which are capable of reliably operating in the challenging high-importance rank-deficient scenarios, where there are more transmitters than receivers and hence the resultant channel-matrix becomes non-invertible. As a result, conventional detectors would exhibit a high residual error floor. We then invoke the Soft-Input Soft-Output (SISO) MIMO detectors for creating turbo-detected two- or three-stage concatenated SDM schemes and investigate their attainable performance in the light of their computational complexity. Finally, we introduce the powerful design tools of EXtrinsic Information Transfer (EXIT)-charts and characterize the achievable performance of the diverse near- capacity SISO detectors with the aid of EXIT charts

Low-Complexity Algorithms for Channel Estimation in Optimised Pilot-Assisted Wireless OFDM Systems

Orthogonal frequency division multiplexing (OFDM) has recently become a dominant transmission technology considered for the next generation fixed and mobile broadband wireless communication systems. OFDM has an advantage of lessening the severe effects of the frequency-selective (multipath) fading due to the band splitting into relatively flat fading subchannels, and allows for low-complexity transceiver implementation based on the fast Fourier transform algorithms. Combining OFDM modulation with multilevel frequency-domain symbol mapping (e.g., QAM) and spatial multiplexing (SM) over the multiple-input multiple-output (MIMO) channels, can theoretically achieve near Shannon capacity of the communication link. However, the high-rate and spectrumefficient system implementation requires coherent detection at the receiving end that is possible only when accurate channel state information (CSI) is available. Since in practice, the response of the wireless channel is unknown and is subject to random variation with time, the receiver typically employs a channel estimator for CSI acquisition. The channel response information retrieved by the estimator is then used by the data detector and can also be fed back to the transmitter by means of in-band or out-of-band signalling, so the latter could adapt power loading, modulation and coding parameters according to the channel conditions. Thus, design of an accurate and robust channel estimator is a crucial requirement for reliable communication through the channel, which is selective in time and frequency. In a MIMO configuration, a separate channel estimator has to be associated with each transmit/receive antenna pair, making the estimation algorithm complexity a primary concern. Pilot-assisted methods, relying on the insertion of reference symbols in certain frequencies and time slots, have been found attractive for identification of the doubly-selective radio channels from both the complexity and performance standpoint. In this dissertation, a family of the reduced-complexity estimators for the single and multiple-antenna OFDM systems is developed. The estimators are based on the transform-domain processing and have the same order of computational complexity, irrespective of the number of pilot subcarriers and their positioning. The common estimator structure represents a cascade of successive small-dimension filtering modules. The number of modules, as well as their order inside the cascade, is determined by the class of the estimator (one or two-dimensional) and availability of the channel statistics (correlation and signal-to-noise power ratio). For fine precision estimation in the multipath channels with statistics not known a priori, we propose recursive design of the filtering modules. Simulation results show that in the steady state, performance of the recursive estimators approaches that of their theoretical counterparts, which are optimal in the minimum mean square error (MMSE) sense. In contrast to the majority of the channel estimators developed so far, our modular-type architectures are suitable for the reconfigurable OFDM transceivers where the actual channel conditions influence the decision of what class of filtering algorithm to use, and how to allot pilot subcarrier positions in the band. In the pilot-assisted transmissions, channel estimation and detection are performed separately from each other over the distinct subcarrier sets. The estimator output is used only to construct the detector transform, but not as the detector input. Since performance of both channel estimation and detection depends on the signal-to-noise power vi ratio (SNR) at the corresponding subcarriers, there is a dilemma of the optimal power allocation between the data and the pilot symbols as these are conflicting requirements under the total transmit power constraint. The problem is exacerbated by the variety of channel estimators. Each kind of estimation algorithm is characterised by its own SNR gain, which in general can vary depending on the channel correlation. In this dissertation, we optimise pilot-data power allocation for the case of developed low-complexity one and two-dimensional MMSE channel estimators. The resultant contribution is manifested by the closed-form analytical expressions of the upper bound (suboptimal approximate value) on the optimal pilot-to-data power ratio (PDR) as a function of a number of design parameters (number of subcarriers, number of pilots, number of transmit antennas, effective order of the channel model, maximum Doppler shift, SNR, etc.). The resultant PDR equations can be applied to the MIMO-OFDM systems with arbitrary arrangement of the pilot subcarriers, operating in an arbitrary multipath fading channel. These properties and relatively simple functional representation of the derived analytical PDR expressions are designated to alleviate the challenging task of on-the-fly optimisation of the adaptive SM-MIMO-OFDM system, which is capable of adjusting transmit signal configuration (e.g., block length, number of pilot subcarriers or antennas) according to the established channel conditions

Channel Estimation for Frequency-Domain Equalization of Single Carrier Broadband Wireless Communications

Frequency-domain equalization (FDE) is an effective technique for high data rate wireless communication systems suffering from very long intersymbol interference. Most of existing FDE algorithms are limited to slow time-varying fading channels due to lack of accurate channel estimator. In this paper, we employ interpolation method to propose new algorithms for frequency-domain channel estimation for both slow and fast timevarying fading.We show that least squares-based channel estimation and minimum mean square error-based channel estimation with interpolations are equivalent under certain conditions. Noise variance estimation and channel equalization in the frequency domain are also discussed with fine-tuned formulas. Numerical examples indicate that the new algorithms perform very well for severe fading channels with long delay spread and high Doppler spread. It is also shown that our new algorithms outperform recently developed frequency-domain least mean squares (LMS) and recursive least squares (RLS) algorithms which are capable of dealing with moderate fading channels

New ST-BC MIMO-CDMA Transceiver With Augmented User Signatures

[[abstract]]This paper presents new transceiver framework for the DS-CDMA systems that use the multiple-input multiple-output (MIMO) antennas, with space-time block code (ST-BC). In the transmitter, new hybrid (prefix/postfix) zero-padding sequences combining with the desired user signature is exploited to form the hybrid augmented user signature sequences, with respect to different transmit-antennas. While in the receiver under the GSC framework a new Capon-like semi-blind MIMO-CDMA filterbank detector based on the linearly constrained constant modulus (LCCM) criterion, is derived. Also, the adaptive GSC-RLS algorithm is developed for adaptively implementing the blind LCCM MIMO-CDMA filterbank of the receiver. With the specific design of the hybrid augmented user signature sequences, we are able to resolve phase ambiguity problem of blind channel estimation. Computer simulations verify the merits of the proposed new transceiver framework; it can be employed to achieve better performance, and is more robust against the discrepancy due to Capon channel estimation.[[conferencetype]]國際[[conferencedate]]20101206~20101208[[booktype]]紙本[[iscallforpapers]]Y[[conferencelocation]]Chengdu, Chin