1,883 research outputs found
3D Integration: Another Dimension Toward Hardware Security
We review threats and selected schemes concerning hardware security at design
and manufacturing time as well as at runtime. We find that 3D integration can
serve well to enhance the resilience of different hardware security schemes,
but it also requires thoughtful use of the options provided by the umbrella
term of 3D integration. Toward enforcing security at runtime, we envision
secure 2.5D system-level integration of untrusted chips and "all around"
shielding for 3D ICs.Comment: IEEE IOLTS 201
Thermal Management in Fine-Grained 3-D Integrated Circuits
For beyond 2-D CMOS logic, various 3-D integration approaches specially
transistor based 3-D integrations such as monolithic 3-D [1], Skybridge [2],
SN3D [3] holds most promise. However, such 3D architectures within small form
factor increase hotspots and demand careful consideration of thermal management
at all levels of integration [4] as stacked transistors are detached from the
substrate (i.e., heat sink). Traditional system level approaches such as liquid
cooling [5], heat spreader [6], etc. are inadequate for transistor level 3-D
integration and have huge cost overhead [7]. In this paper, we investigate the
thermal profile for transistor level 3-D integration approaches through finite
element based modeling. Additionally, we propose generic physical level heat
management features for such transistor level 3-D integration and show their
application through detailed thermal modeling and simulations. These features
include a thermal junction and heat conducting nano pillar. The heat junction
is a specialized junction to extract heat from a selected region in 3-D; it
allows heat conduction without interference with the electrical activities of
the circuit. In conjunction with the junction, our proposed thermal pillars
enable heat dissipation through the substrate; these pillars are analogous to
TSVs/Vias, but carry only heat. Such structures are generic and is applicable
to any transistor level 3-D integration approaches. We perform 3-D finite
element based analysis to capture both static and transient thermal behaviors
of 3-D circuits, and show the effectiveness of heat management features. Our
simulation results show that without any heat extraction feature, temperature
for 3-D integrated circuits increased by almost 100K-200K. However, proposed
heat extraction feature is very effective in heat management, reducing
temperature from heated area by up to 53%.Comment: 9 Page
Recommended from our members
Skybridge-3D-CMOS: A Fine-Grained Vertical 3D-CMOS Technology Paving New Direction for 3D IC
2D CMOS integrated circuit (IC) technology scaling faces severe challenges that result from device scaling limitations, interconnect bottleneck that dominates power and performance, etc. 3D ICs with die-die and layer-layer stacking using Through Silicon Vias (TSVs) and Monolithic Inter-layer Vias (MIVs) have been explored in recent years to generate circuits with considerable interconnect saving for continuing technology scaling. However, these 3D IC technologies still rely on conventional 2D CMOS’s device, circuit and interconnect mindset showing only incremental benefits while adding new challenges reliability issues, robustness of power delivery network design and short-channel effects as technology node scaling.
Skybridge-3D-CMOS (S3DC) is a fine-grained 3D IC fabric that uses vertically-stacked gates and 3D interconnections composed on vertical nanowires to yield orders of magnitude benefits over 2D ICs. This 3D fabric fully uses the vertical dimension instead of relying on a multi-layered 2D mindset. Its core fabric aspects including device, circuit-style, interconnect and heat-extraction components are co-architected considering the major challenges in 3D IC technology. In S3DC, the 3D interconnections provide greater routing capacity in both vertical and horizontal directions compared to conventional 3D ICs, which eliminates the routability issue in conventional 3D IC technology while enabling ultra-high density design and significant benefits over 2D. Also, the improved vertical routing capacity in S3DC is beneficial for achieving robust and high-density power delivery network (PDN) design while conventional 3D IC has design issues in PDN design due to limited routing resource in vertical direction. Additionally, the 3D gate-all-around transistor incorporating with 3D interconnect in S3DC enables significant SRAM design benefits and good tolerance of process variation compared to conventional 3D IC technology as well as 2D CMOS.
The transistor-level (TR-L) monolithic 3D IC (M3D) is the state-of-the-art monolithic 3D technology which shows better benefits than other M3D approaches as well as the TSV-based 3D IC approach. The S3DC is evaluated in large-scale benchmark circuits with comparison to TR-L M3D as well as 2D CMOS. Skybridge yields up to 3x lower power against 2D with no routing congestion in benchmark circuits while TR-L M3D only has up-to 22% power saving with severe routing congestions in the design. The PDN design in S3DC show
Challenges and solutions for large-scale integration of emerging technologies
Title from PDF of title page viewed June 15, 2021Dissertation advisor: Mostafizur RahmanVitaIncludes bibliographical references (pages 67-88)Thesis (Ph.D.)--School of Computing and Engineering and Department of Physics and Astronomy. University of Missouri--Kansas City, 2021The semiconductor revolution so far has been primarily driven by the ability to shrink devices and interconnects proportionally (Moore's law) while achieving incremental benefits. In sub-10nm nodes, device scaling reaches its fundamental limits, and the interconnect bottleneck is dominating power and performance. As the traditional way of CMOS scaling comes to an end, it is essential to find an alternative to continue this progress. However, an alternative technology for general-purpose computing remains elusive; currently pursued research directions face adoption challenges in all aspects from materials, devices to architecture, thermal management, integration, and manufacturing.
Crosstalk Computing, a novel emerging computing technique, addresses some of the challenges and proposes a new paradigm for circuit design, scaling, and security. However, like other emerging technologies, Crosstalk Computing also faces challenges like designing large-scale circuits using existing CAD tools, scalability, evaluation and benchmarking of large-scale designs, experimentation through commercial foundry processes to compete/co-exist with CMOS for digital logic implementations.
This dissertation addresses these issues by providing a methodology for circuit synthesis customizing the existing EDA tool flow, evaluating and benchmarking against state-of-the-art CMOS for large-scale circuits designed at 7nm from MCNC benchmark suits. This research also presents a study on Crosstalk technology's scalability aspects and shows how the circuits' properties evolve from 180nm to 7nm technology nodes. Some significant results are for primitive Crosstalk gate, designed in 180nm, 65nm, 32nm, and 7nm technology nodes, the average reduction in power is 42.5%, and an average improvement in performance is 34.5% comparing to CMOS for all mentioned nodes. For benchmarking large-scale circuits designed at 7nm, there are 48%, 57%, and 10% improvements against CMOS designs in terms of density, power, and performance, respectively. An experimental demonstration of a proof-of-concept prototype chip for Crosstalk Computing at TSMC 65nm technology is also presented in this dissertation, showing the Crosstalk gates can be realized using the existing manufacturing process.
Additionally, the dissertation also provides a fine-grained thermal management approach for emerging technologies like transistor-level 3-D integration (Monolithic 3-D, Skybridge, SN3D), which holds the most promise beyond 2-D CMOS technology. However, such 3-D architectures within small form factors increase hotspots and demand careful consideration of thermal management at all integration levels. This research proposes a new direction for fine-grained thermal management approach for transistor-level 3-D integrated circuits through the insertion of architected heat extraction features that can be part of circuit design, and an integrated methodology for thermal evaluation of 3-D circuits combining different simulation outcomes at advanced nodes, which can be integrated to traditional CAD flow. The results show that the proposed heat extraction features effectively reduce the temperature from a heated location. Thus, the dissertation provides a new perspective to overcome the challenges faced by emerging technologies where the device, circuit, connectivity, heat management, and manufacturing are addressed in an integrated manner.Introduction and motivation -- Cross talk computing overview -- Logic simplification approach for Crosstalk circuit design -- Crostalk computing scalability study: from 180 nm to 7 nm -- Designing large*scale circuits in Crosstalk at 7 nm -- Comparison and benchmarking -- Experimental demonstration of Crosstalk computing -- Thermal management challenges and mitigation techniques for transistor-level- 3D integratio
A survey of carbon nanotube interconnects for energy efficient integrated circuits
This article is a review of the state-of-art carbon nanotube interconnects for Silicon application with respect to the recent literature. Amongst all the research on carbon nanotube interconnects, those discussed here cover 1) challenges with current copper interconnects, 2) process & growth of carbon nanotube interconnects compatible with back-end-of-line integration, and 3) modeling and simulation for circuit-level benchmarking and performance prediction. The focus is on the evolution of carbon nanotube interconnects from the process, theoretical modeling, and experimental characterization to on-chip interconnect applications. We provide an overview of the current advancements on carbon nanotube interconnects and also regarding the prospects for designing energy efficient integrated circuits. Each selected category is presented in an accessible manner aiming to serve as a survey and informative cornerstone on carbon nanotube interconnects relevant to students and scientists belonging to a range of fields from physics, processing to circuit design
Programmable photonics : an opportunity for an accessible large-volume PIC ecosystem
We look at the opportunities presented by the new concepts of generic programmable photonic integrated circuits (PIC) to deploy photonics on a larger scale. Programmable PICs consist of waveguide meshes of tunable couplers and phase shifters that can be reconfigured in software to define diverse functions and arbitrary connectivity between the input and output ports. Off-the-shelf programmable PICs can dramatically shorten the development time and deployment costs of new photonic products, as they bypass the design-fabrication cycle of a custom PIC. These chips, which actually consist of an entire technology stack of photonics, electronics packaging and software, can potentially be manufactured cheaper and in larger volumes than application-specific PICs. We look into the technology requirements of these generic programmable PICs and discuss the economy of scale. Finally, we make a qualitative analysis of the possible application spaces where generic programmable PICs can play an enabling role, especially to companies who do not have an in-depth background in PIC technology
CAD methodologies for low power and reliable 3D ICs
The main objective of this dissertation is to explore and develop computer-aided-design (CAD) methodologies and optimization techniques for reliability, timing performance, and power consumption of through-silicon-via(TSV)-based and monolithic 3D IC designs. The 3D IC technology is a promising answer to the device scaling and interconnect problems that industry faces today. Yet, since multiple dies are stacked vertically in 3D ICs, new problems arise such as thermal, power delivery, and so on. New physical design methodologies and optimization techniques should be developed to address the problems and exploit the design freedom in 3D ICs. Towards the objective, this dissertation includes four research projects.
The first project is on the co-optimization of traditional design metrics and reliability metrics for 3D ICs. It is well known that heat removal and power delivery are two major reliability concerns in 3D ICs. To alleviate thermal problem, two possible solutions have been proposed: thermal-through-silicon-vias (T-TSVs) and micro-fluidic-channel (MFC) based cooling. For power delivery, a complex power distribution network is required to deliver currents reliably to all parts of the 3D IC while suppressing the power supply noise to an acceptable level. However, these thermal and power networks pose major challenges in signal routability and congestion. In this project, a co-optimization methodology for signal, power, and thermal interconnects in 3D ICs is presented. The goal of the proposed approach is to improve signal, thermal, and power noise metrics and to provide fast and accurate design space explorations for early design stages.
The second project is a study on 3D IC partition. For a 3D IC, the target circuit needs to be partitioned into multiple parts then mapped onto the dies. The partition style impacts design quality such as footprint, wirelength, timing, and so on. In this project, the design methodologies of 3D ICs with different partition styles are demonstrated. For the LEON3 multi-core microprocessor, three partitioning styles are compared: core-level, block-level, and gate-level. The design methodologies for such partitioning styles and their implications on the physical layout are discussed. Then, to perform timing optimizations for 3D ICs, two timing constraint generation methods are demonstrated that lead to different design quality.
The third project is on the buffer insertion for timing optimization of 3D ICs. For high performance 3D ICs, it is crucial to perform thorough timing optimizations. Among timing optimization techniques, buffer insertion is known to be the most effective way. The TSVs have a large parasitic capacitance that increases the signal slew and the delay on the downstream. In this project, a slew-aware buffer insertion algorithm is developed that handles full 3D nets and considers TSV parasitics and slew effects on delay. Compared with the well-known van Ginneken algorithm and a commercial tool, the proposed algorithm finds buffering solutions with lower delay values and acceptable runtime overhead.
The last project is on the ultra-high-density logic designs for monolithic 3D ICs. The nano-scale 3D interconnects available in monolithic 3D IC technology enable ultra-high-density device integration at the individual transistor-level. The benefits and challenges of monolithic 3D integration technology for logic designs are investigated. First, a 3D standard cell library for transistor-level monolithic 3D ICs is built and their timing and power behavior are characterized. Then, various interconnect options for monolithic 3D ICs that improve design quality are explored. Next, timing-closed, full-chip GDSII layouts are built and iso-performance power comparisons with 2D IC designs are performed. Important design metrics such as area, wirelength, timing, and power consumption are compared among transistor-level monolithic 3D, gate-level monolithic 3D, TSV-based 3D, and traditional 2D designs.PhDCommittee Chair: Lim, Sung Kyu; Committee Member: Bakir, Muhannad; Committee Member: Kim, Hyesoon; Committee Member: Lee, Hsien-Hsin; Committee Member: Mukhopadhyay, Saiba
- …