Frequency regulation in wind integrated power system

This Thesis has broader implications in terms of improvement in wind generation modeling which is a current requirement for prospective operational planning tools for future grid. This thesis mainly deals with various modelling issues encountered in wind integrated power system for frequency regulation. Thesis provides development of grid code compatible, frequency responsive type 4 wind turbine generator system and analysis of the wind energy systems frequency regulation capability and their integration impact on interconnected power system.<br /

Smoothing Output Fluctuations of Wind Turbines and Enhancing Power System Frequency Using Coefficient Diagram Method

Due to recent expansion of renewable energy applications, Wind Energy System (WES) is receiving much interest all over the world. However, output fluctuations of wind generators can cause network frequency variations in power systems, which can consequently decrease the power quality. This problem of output fluctuations needs to be solved for further expanding wind energy conversion into power system. On the other hand, area load change and abnormal conditions can lead to mismatches in frequency and these mismatches have to be corrected by the load frequency system. This paper therefore proposes a new load frequency control (LFC) design using Coefficient Diagram Method (CDM) in the presence of wind turbines (WT), for improving network frequency quality. The CDM technique reduces the effect of uncertainty due to governor and turbine parameters variations and load disturbance. Digital simulation performed on a single-area power system with wind turbines validates the effectiveness of the proposed scheme. Results show that, with the proposed CDM technique, the overall closed loop system performance demonstrated robustness. Performance comparisons between the proposed controller, a classical integral control and Model predictive control is carried out confirming the superiority of the proposed technique in presence of doubly fed induction generator (DFIG) WT

Model predictive-based secondary frequency control considering heat pump water heaters

The extensive development of renewable energies in power systems causes several problems due to intermittent output power generation. To tackle the challenge, demand response contribution to ancillary service is currently well recognized under the smart grid infrastructure. The application of the heat pump water heater (HPWH) as a controllable load in primary frequency control is well presented in the literature; however, the motivation of this paper is to use HPWHs for secondary frequency control. To this end, a model predictive control (MPC) method for a two-area power system incorporating HPWHs to contribute to secondary frequency control is proposed in this paper. A detailed model of HPWH is employed as a controllable load to control the power consumption during water heating. The MPC method predicts the future control signals using a quadratic programming-based optimization. It uses the system model, past inputs and outputs, as well as system control signals to predict the next signals. The effective performance of the proposed method for the two-area power system with HPWH is demonstrated for different scenarios of load changes, intermittent renewable power generation and parameter variations as the sensitivity analysis

Load frequency controllers considering renewable energy integration in power system

Abstract: Load frequency control or automatic generation control is one of the main operations that take place daily in a modern power system. The objectives of load frequency control are to maintain power balance between interconnected areas and to control the power flow in the tie-lines. Electric power cannot be stored in large quantity that is why its production must be equal to the consumption in each time. This equation constitutes the key for a good management of any power system and introduces the need of more controllers when taking into account the integration of renewable energy sources into the traditional power system. There are many controllers presented in the literature and this work reviews the traditional load frequency controllers and those, which combined the traditional controller and artificial intelligence algorithms for controlling the load frequency

Wind Farms and Flexible Loads Contribution in Automatic Generation Control: An Extensive Review and Simulation

With the increasing integration of wind energy sources into conventional power systems, the demand for reserve power has risen due to associated forecasting errors. Consequently, developing innovative operating strategies for automatic generation control (AGC) has become crucial. These strategies ensure a real-time balance between load and generation while minimizing the reliance on operating reserves from conventional power plant units. Wind farms exhibit a strong interest in participating in AGC operations, especially when AGC is organized into different regulation areas encompassing various generation units. Further, the integration of flexible loads, such as electric vehicles and thermostatically controlled loads, is considered indispensable in modern power systems, which can have the capability to offer ancillary services to the grid through the AGC systems. This study initially presents the fundamental concepts of wind power plants and flexible load units, highlighting their significant contribution to load frequency control (LFC) as an important aspect of AGC. Subsequently, a real-time dynamic dispatch strategy for the AGC model is proposed, integrating reserve power from wind farms and flexible load units. For simulations, a future Pakistan power system model is developed using Dig SILENT Power Factory software (2020 SP3), and the obtained results are presented. The results demonstrate that wind farms and flexible loads can effectively contribute to power-balancing operations. However, given its cost-effectiveness, wind power should be operated at maximum capacity and only be utilized when there is a need to reduce power generation. Additionally, integrating reserves from these sources ensures power system security, reduces dependence on conventional sources, and enhances economic efficiency

Load Frequency Control for Hydropower Plants using PID Controller

Many development republics began to get rid of conventional energy and towards to use renewable energy like hydropower system, solar cells and wind turbines as soon as possible. Load Frequency Control (LFC) problem is coming to be the main topics for mentioning schemes due to not corresponding between main power system inputs such as change load demand and change in speed turbine settings. This paper illustrates a selftuning control of hydropower system that suggested and confirmed under Automatic Generation Control (AGC) in power scheme. The suggested power system involves one single area. The suggested self-tuning control system is employed in performing the automatic generation control for load frequency control request and compared it with conventional control structure. The power system dynamic modeling has regularly built in several essential parameters which have a significant influence According to frequency limitation. The main problem with all controllers is an exaggerated reaction to minor errors, producing the system to oscillate. The output response results for hydropower system obviously proved the benefit of using maximum load demand by tuning PID controller. Whereas, tuning PID controller has got properly more rapid output response and minimal overshoot

Load Frequency Control for Hydropower Plants using PID Controller

Many development republics began to get rid of conventional energy and towards to use renewable energy like hydropower system, solar cells and wind turbines as soon as possible. Load Frequency Control (LFC) problem is coming to be the main topics for mentioning schemes due to not corresponding between main power system inputs such as change load demand and change in speed turbine settings. This paper illustrates a selftuning control of hydropower system that suggested and confirmed under Automatic Generation Control (AGC) in power scheme. The suggested power system involves one single area. The suggested self-tuning control system is employed in performing the automatic generation control for load frequency control request and compared it with conventional control structure. The power system dynamic modeling has regularly built in several essential parameters which have a significant influence According to frequency limitation. The main problem with all controllers is an exaggerated reaction to minor errors, producing the system to oscillate. The output response results for hydropower system obviously proved the benefit of using maximum load demand by tuning PID controller. Whereas, tuning PID controller has got properly more rapid output response and minimal overshoot

Advances in Modelling and Control of Wind and Hydrogenerators

Rapid deployment of wind and solar energy generation is going to result in a series of new problems with regards to the reliability of our electrical grid in terms of outages, cost, and life-time, forcing us to promptly deal with the challenging restructuring of our energy systems. Increased penetration of fluctuating renewable energy resources is a challenge for the electrical grid. Proposing solutions to deal with this problem also impacts the functionality of large generators. The power electronic generator interactions, multi-domain modelling, and reliable monitoring systems are examples of new challenges in this field. This book presents some new modelling methods and technologies for renewable energy generators including wind, ocean, and hydropower systems

Advances in Modelling and Control of Wind and Hydrogenerators

Rapid deployment of wind and solar energy generation is going to result in a series of new problems with regards to the reliability of our electrical grid in terms of outages, cost, and life-time, forcing us to promptly deal with the challenging restructuring of our energy systems. Increased penetration of fluctuating renewable energy resources is a challenge for the electrical grid. Proposing solutions to deal with this problem also impacts the functionality of large generators. The power electronic generator interactions, multi-domain modelling, and reliable monitoring systems are examples of new challenges in this field. This book presents some new modelling methods and technologies for renewable energy generators including wind, ocean, and hydropower systems