Dynamic Dependency Collapsing

In this dissertation, we explore the concept of dynamic dependency collapsing. Performance increases in computer architecture are always introduced by exploiting additional parallelism when the clock speed is fixed. We show that further improvements are possible even when the available parallelism in programs are exhausted. This performance improvement is possible due to executing instructions in parallel that would ordinarily have been serialized. We call this concept dependency collapsing. We explore existing techniques that exploit parallelism and show which of them fall under the umbrella of dependency collapsing. We then introduce two dependency collapsing techniques of our own. The first technique collapses data dependencies by executing two normally dependent instructions together by fusing them. We show that exploiting the additional parallelism generated by collapsing these dependencies results in a performance increase. Our second technique collapses resource dependencies to execute instructions that would normally have been serialized due to resource constraints in the processor. We show that it is possible to take advantage of larger in-processor structures while avoiding the power and area penalty this often implies

Design of a distributed memory unit for clustered microarchitectures

Power constraints led to the end of exponential growth in single–processor performance, which characterized the semiconductor industry for many years. Single–chip multiprocessors allowed the performance growth to continue so far. Yet, Amdahl’s law asserts that the overall performance of future single–chip multiprocessors will depend crucially on single–processor performance. In a multiprocessor a small growth in single–processor performance can justify the use of significant resources. Partitioning the layout of critical components can improve the energy–efficiency and ultimately the performance of a single processor. In a clustered microarchitecture parts of these components form clusters. Instructions are processed locally in the clusters and benefit from the smaller size and complexity of the clusters components. Because the clusters together process a single instruction stream communications between clusters are necessary and introduce an additional cost. This thesis proposes the design of a distributed memory unit and first level cache in the context of a clustered microarchitecture. While the partitioning of other parts of the microarchitecture has been well studied the distribution of the memory unit and the cache has received comparatively little attention. The first proposal consists of a set of cache bank predictors. Eight different predictor designs are compared based on cost and accuracy. The second proposal is the distributed memory unit. The load and store queues are split into smaller queues for distributed disambiguation. The mapping of memory instructions to cache banks is delayed until addresses have been calculated. We show how disambiguation can be implemented efficiently with unordered queues. A bank predictor is used to map instructions that consume memory data near the data origin. We show that this organization significantly reduces both energy usage and latency. The third proposal introduces Dispatch Throttling and Pre-Access Queues. These mechanisms avoid load/store queue overflows that are a result of the late allocation of entries. The fourth proposal introduces Memory Issue Queues, which add functionality to select instructions for execution and re-execution to the memory unit. The fifth proposal introduces Conservative Deadlock Aware Entry Allocation. This mechanism is a deadlock safe issue policy for the Memory Issue Queues. Deadlocks can result from certain queue allocations because entries are allocated out-of-order instead of in-order like in traditional architectures. The sixth proposal is the Early Release of Load Queue Entries. Architectures with weak memory ordering such as Alpha, PowerPC or ARMv7 can take advantage of this mechanism to release load queue entries before the commit stage. Together, these proposals allow significantly smaller and more energy efficient load queues without the need of energy hungry recovery mechanisms and without performance penalties. Finally, we present a detailed study that compares the proposed distributed memory unit to a centralized memory unit and confirms its advantages of reduced energy usage and of improved performance

Reducing soft errors through operand width aware policies

Soft errors are an important challenge in contemporary microprocessors. Particle hits on the components of a processor are expected to create an increasing number of transient errors with each new microprocessor generation. In this paper, we propose simple mechanisms that effectively reduce the vulnerability to soft errors in a processor. Our designs are generally motivated by the fact that many of the produced and consumed values in the processors are narrow and their upper order bits are meaningless. Soft errors caused by any particle strike to these higher order bits can be avoided by simply identifying these narrow values. Alternatively, soft errors can be detected or corrected on the narrow values by replicating the vulnerable portion of the value inside the storage space provided for the upper order bits of these operands. As a faster but less fault tolerant alternative to ECC and parity, we offer a variety of schemes that make use of narrow values and analyze their efficiency in reducing soft error vulnerability of different data-holding components of a processor. On average, techniques that make use of the narrowness of the values can provide 49 percent error detection, 45 percent error correction, or 27 percent error avoidance coverage for single bit upsets in the first level data cache across all Spec2K. In other structures such as the immediate field of the issue queue, an average error detection rate of 64 percent is achieved.Peer ReviewedPostprint (published version

Chapter One – An Overview of Architecture-Level Power- and Energy-Efficient Design Techniques

Power dissipation and energy consumption became the primary design constraint for almost all computer systems in the last 15 years. Both computer architects and circuit designers intent to reduce power and energy (without a performance degradation) at all design levels, as it is currently the main obstacle to continue with further scaling according to Moore's law. The aim of this survey is to provide a comprehensive overview of power- and energy-efficient “state-of-the-art” techniques. We classify techniques by component where they apply to, which is the most natural way from a designer point of view. We further divide the techniques by the component of power/energy they optimize (static or dynamic), covering in that way complete low-power design flow at the architectural level. At the end, we conclude that only a holistic approach that assumes optimizations at all design levels can lead to significant savings.Peer ReviewedPostprint (published version

Reducing the complexity of the register file in dynamic superscalar processors

Journal ArticleDynamic superscalar processors execute multiple instructions out-of-order by looking for independent operations within a large window. The number of physical registers within the processor has a direct impact on the size of this window as most in-flight instructions require a new physical register at dispatch. A large multi-ported register file helps improve the instruction-level parallelism (ILP), but may have a detrimental effect on clock speed, especially in future wire-limited technologies. In this paper, we propose a register file organization that reduces register file size and port requirements for a given amount of ILP. We use a two-level register file organization to reduce register file size requirements, and a banked organization to reduce port requirements. We demonstrate empirically that the resulting register file organizations have reduced latency and (in the case of the banked organization) energy requirements for similar instructions per cycle (IPC) performance and improved instructions per second (IPS) performance in comparison to a conventional monolithic register file. The choice of organization is dependent on design goals

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

VThreads: A novel VLIW chip multiprocessor with hardware-assisted PThreads

We discuss VThreads, a novel VLIW CMP with hardware-assisted shared-memory Thread support. VThreads supports Instruction Level Parallelism via static multiple-issue and Thread Level Parallelism via hardware-assisted POSIX Threads along with extensive customization. It allows the instantiation of tightlycoupled streaming accelerators and supports up to 7-address Multiple-Input, Multiple-Output instruction extensions. VThreads is designed in technology-independent Register-Transfer-Level VHDL and prototyped on 40 nm and 28 nm Field-Programmable gate arrays. It was evaluated against a PThreads-based multiprocessor based on the Sparc-V8 ISA. On a 65 nm ASIC implementation VThreads achieves up to x7.2 performance increase on synthetic benchmarks, x5 on a parallel Mandelbrot implementation, 66% better on a threaded JPEG implementation, 79% better on an edge-detection benchmark and ~13% improvement on DES compared to the Leon3MP CMP. In the range of 2 to 8 cores VThreads demonstrates a post-route (statistical) power reduction between 65% to 57% at an area increase of 1.2%-10% for 1-8 cores, compared to a similarly-configured Leon3MP CMP. This combination of micro-architectural features, scalability, extensibility, hardware support for low-latency PThreads, power efficiency and area make the processor an attractive proposition for low-power, deeply-embedded applications requiring minimum OS support

Vector-thread architecture and implementation

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 181-186).This thesis proposes vector-thread architectures as a performance-efficient solution for all-purpose computing. The VT architectural paradigm unifies the vector and multithreaded compute models. VT provides the programmer with a control processor and a vector of virtual processors. The control processor can use vector-fetch commands to broadcast instructions to all the VPs or each VP can use thread-fetches to direct its own control flow. A seamless intermixing of the vector and threaded control mechanisms allows a VT architecture to flexibly and compactly encode application parallelism and locality. VT architectures can efficiently exploit a wide variety of loop-level parallelism, including non-vectorizable loops with cross-iteration dependencies or internal control flow. The Scale VT architecture is an instantiation of the vector-thread paradigm designed for low-power and high-performance embedded systems. Scale includes a scalar RISC control processor and a four-lane vector-thread unit that can execute 16 operations per cycle and supports up to 128 simultaneously active virtual processor threads. Scale provides unit-stride and strided-segment vector loads and stores, and it implements cache refill/access decoupling. The Scale memory system includes a four-port, non-blocking, 32-way set-associative, 32 KB cache. A prototype Scale VT processor was implemented in 180 nm technology using an ASIC-style design flow. The chip has 7.1 million transistors and a core area of 16.6 mm2, and it runs at 260 MHz while consuming 0.4-1.1 W. This thesis evaluates Scale using a diverse selection of embedded benchmarks, including example kernels for image processing, audio processing, text and data processing, cryptography, network processing, and wireless communication.(cont.) Larger applications also include a JPEG image encoder and an IEEE 802.11 la wireless transmitter. Scale achieves high performance on a range of different types of codes, generally executing 3-11 compute operations per cycle. Unlike other architectures which improve performance at the expense of increased energy consumption, Scale is generally even more energy efficient than a scalar RISC processor.by Ronny Meir Krashinsky.Ph.D