An MIG-based Compiler for Programmable Logic-in-Memory Architectures

Resistive memories have gained high research attention for enabling design of in-memory computing circuits and systems. We propose for the first time an automatic compilation methodology suited to a recently proposed computer architecture solely based on resistive memory arrays. Our approach uses Majority-Inverter Graphs (MIGs) to manage the computational operations. In order to obtain a performance and resource efficient program, we employ optimization techniques both to the underlying MIG as well as to the compilation procedure itself. In addition, our proposed approach optimizes the program with respect to memory endurance constraints which is of particular importance for in-memory computing architectures

Endurance Management for Resistive Logic-In-Memory Computing Architectures

Resistive Random Access Memory (RRAM) is a promising non-volatile memory technology which enables modern in-memory computing architectures. Although RRAMs are known to be superior to conventional memories in many aspects, they suffer from a low write endurance. In this paper, we focus on balancing memory write traffic as a solution to extend the lifetime of resistive crossbar architectures. As a case study, we monitor the write traffic in a Programmable Logic-in-Memory (PLiM) architecture, and propose an endurance management scheme for it. The proposed endurance-aware compilation is capable of handling different trade-offs between write balance, latency, and area of the resulting PLiM implementations. Experimental evaluations on a set of benchmarks including large arithmetic and control functions show that the standard deviation of writes can be reduced by 86.65% on average compared to a naive compiler, while the average number of instructions and RRAM devices also decreases by 36.45% and 13.67%, respectively

Adaptation of High Performance and High Capacity Reconfigurable Systems to OpenCL Programming Environments

[EN] In this work, we adapt a reconfigurable computer system based on FPGA technologies to OpenCL programming environments. The reconfigurable system is part of a compute prototype of the MANGO European project that includes 96 FPGAs. To optimize the use and to obtain its maximum performance, it is essential to adapt it to heterogeneous systems programming environments such as OpenCL, which simplifies its programming. In this work, all the necessary activities for correct implementation of the software and hardware layer required for its use in OpenCL will be carried out, as well as an evaluation of the performance obtained and the flexibility offered by the solution provided. This work has been performed during an internship of 5 months. The internship is linked to an agreement between UPV and UniNa (Università degli Studi di Napoli Federico II).[ES] En este trabajo se va a realizar la adaptación de un sistema reconfigurable de cómputo basado en tecnologías de FPGAs hacia entornos de programación en OpenCL. El sistema reconfigurable forma parte de un prototipo de cálculo del proyecto Europeo MANGO que incluye 96 FPGAs. Con el fin de optimizar el uso y de obtener sus máximas prestaciones, se hace imprescindible una adaptación a entornos de programación de sistemas heterogéneos como OpenCL, lo cual simplifica su programación y uso. En este trabajo se realizarán todas las actividades necesarias para una correcta implementación de la capa software y hardware necesaria para su uso en OpenCL así como una evaluación de las prestaciones obtenidas y de la flexibilidad ofrecida por la solución aportada. Este trabajo se ha llevado a término durante una estancia de cinco meses en la Universitat Politécnica de Valéncia. Esta estancia está vinculada a un acuerdo entre la Universitat Politécnica de Valéncia y la Università degli Studi di Napoli Federico IIRusso, D. (2020). Adaptation of High Performance and High Capacity Reconfigurable Systems to OpenCL Programming Environments. http://hdl.handle.net/10251/150393TFG

Avalanche: A communication and memory architecture for scalable parallel computing

technical reportAs the gap between processor and memory speeds widens?? system designers will inevitably incorpo rate increasingly deep memory hierarchies to maintain the balance between processor and memory system performance At the same time?? most communication subsystems are permitted access only to main memory and not a processor s top level cache As memory latencies increase?? this lack of integration between the memory and communication systems will seriously impede interprocessor communication performance and limit e ective scalability In the Avalanche project we are re designing the memory architecture of a commercial RISC multiprocessor?? the HP PA RISC ?? to include a new multi level context sensitive cache that is tightly coupled to the communication fabric The primary goal of Avalanche s integrated cache and communication controller is attack ing end to end communication latency in all of its forms This includes cache misses induced by excessive invalidations and reloading of shared data by write invalidate coherence protocols and cache misses induced by depositing incoming message data in main memory and faulting it into the cache An execution driven simulation study of Avalanche s architecture indicates that it can reduce cache stalls by and overall execution times b

AN ARCHITECTURE EVALUATION AND IMPLEMENTATION OF A SOFT GPGPU FOR FPGAs

Embedded and mobile systems must be able to execute a variety of different types of code, often with minimal available hardware. Many embedded systems now come with a simple processor and an FPGA, but not more energy-hungry components, such as a GPGPU. In this dissertation we present FlexGrip, a soft architecture which allows for the execution of GPGPU code on an FPGA without the need to recompile the design. The architecture is optimized for FPGA implementation to effectively support the conditional and thread-based execution characteristics of GPGPU execution without FPGA design recompilation. This architecture supports direct CUDA compilation to a binary which is executable on the FPGA-based GPGPU. Our architecture is customizable, thus providing the FPGA designer with a selection of GPGPU cores which display performance versus area tradeoffs. This dissertation describes the FlexGrip architecture in detail and showcases the benefits by evaluating the design for a collection of five standard CUDA benchmarks which are compiled using standard GPGPU compilation tools. Speedups of 23x, on average, versus a MicroBlaze microprocessor are achieved for designs which take advantage of the conditional execution capabilities offered by FlexGrip. We also show FlexGrip can achieve an 80% average reduction of dynamic energy versus the MicroBlaze microprocessor. The dissertation furthers discussion by exploring application-customized versions of the soft GPGPU, thus exploiting the overlay architecture. We expand the architecture to multiple processors per GPGPU and optimizing away features which are not needed by certain classes of applications. These optimizations, which include the effective use of block RAMs and DSP blocks, are critical to the performance of FlexGrip. By implementing a 2 GPGPU design, we show speedups of 44x on average versus a MicroBlaze microprocessor. Application-customized versions of the soft GPGPU can be used to further reduce dynamic energy consumption by an average of 14%. To complete this thesis, we augmented a GPGPU cycle accurate simulator to emulate FlexGrip and evaluate different levels of cache design spaces. We show performance increases for select benchmarks, however, we also show that 64% and 45% of benchmarks exhibited performance decreases when L1D cache was enabled for the 1 SMP and 2 SMP configurations, and only one benchmark showed performance improvement when the L2 cache was enabled

Avalanche: A communication and memory architecture for scalable parallel computing

technical reportAs the gap between processor and memory speeds widens, system designers will inevitably incorporate increasingly deep memory hierarchies to maintain the balance between processor and memory system performance. At the same time, most communication subsystems are permitted access only to main memory and not a processor's top level cache. As memory latencies increase, this lack of integration between the memory and communication systems will seriously impede interprocessor communication performance and limit effective scalability. In the Avalanche project we are redesigning the memory architecture of a commercial RISC multiprocessor, the HP PA-RISC 7100, to include a new multi-level context sensitive cache that is tightly coupled to the communication fabric. The primary goal of Avalanche's integrated cache and communication controller is attacking end to end communication latency in all of its forms. This includes cache misses induced by excessive invalidations and reloading of shared data by write-invalidate coherence protocols and cache misses induced by depositing incoming message data in main memory and faulting it into the cache. An execution-driven simulation study of Avalanche's architecture indicates that it can reduce cache stalls by 5-60% and overall execution times by 10-28%

Exploiting Hardware Abstraction for Parallel Programming Framework: Platform and Multitasking

With the help of the parallelism provided by the fine-grained architecture, hardware accelerators on Field Programmable Gate Arrays (FPGAs) can significantly improve the performance of many applications. However, designers are required to have excellent hardware programming skills and unique optimization techniques to explore the potential of FPGA resources fully. Intermediate frameworks above hardware circuits are proposed to improve either performance or productivity by leveraging parallel programming models beyond the multi-core era. In this work, we propose the PolyPC (Polymorphic Parallel Computing) framework, which targets enhancing productivity without losing performance. It helps designers develop parallelized applications and implement them on FPGAs. The PolyPC framework implements a custom hardware platform, on which programs written in an OpenCL-like programming model can launch. Additionally, the PolyPC framework extends vendor-provided tools to provide a complete development environment including intermediate software framework, and automatic system builders. Designers\u27 programs can be either synthesized as hardware processing elements (PEs) or compiled to executable files running on software PEs. Benefiting from nontrivial features of re-loadable PEs, and independent group-level schedulers, the multitasking is enabled for both software and hardware PEs to improve the efficiency of utilizing hardware resources. The PolyPC framework is evaluated regarding performance, area efficiency, and multitasking. The results show a maximum 66 times speedup over a dual-core ARM processor and 1043 times speedup over a high-performance MicroBlaze with 125 times of area efficiency. It delivers a significant improvement in response time to high-priority tasks with the priority-aware scheduling. Overheads of multitasking are evaluated to analyze trade-offs. With the help of the design flow, the OpenCL application programs are converted into executables through the front-end source-to-source transformation and back-end synthesis/compilation to run on PEs, and the framework is generated from users\u27 specifications

Performance and area evaluations of processor-based benchmarks on FPGA devices

The computing system on SoCs is being long-term research since the FPGA technology has emerged due to its personality of re-programmable fabric, reconfigurable computing, and fast development time to market. During the last decade, uni-processor in a SoC is no longer to deal with the high growing market for complex applications such as Mobile Phones audio and video encoding, image and network processing. Due to the number of transistors on a silicon wafer is increasing, the recent FPGAs or embedded systems are advancing toward multi-processor-based design to meet tremendous performance and benefit this kind of systems are possible. Therefore, is an upcoming age of the MPSoC. In addition, most of the embedded processors are soft-cores, because they are flexible and reconfigurable for specific software functions and easy to build homogenous multi-processor systems for parallel programming. Moreover, behavioural synthesis tools are becoming a lot more powerful and enable to create datapath of logic units from high-level algorithms such as C to HDL and available for partitioning a HW/SW concurrent methodology. A range of embedded processors is able to implement on a FPGA-based prototyping to integrate the CPUs on a programmable device. This research is, firstly represent different types of computer architectures in modern embedded processors that are followed in different type of software applications (eg. Multi-threading Operations or Complex Functions) on FPGA-based SoCs; and secondly investigate their capability by executing a wide-range of multimedia software codes (Integer-algometric only) in different models of the processor-systems (uni-processor or multi-processor or Co-design), and finally compare those results in terms of the benchmarks and resource utilizations within FPGAs. All the examined programs were written in standard C and executed in a variety numbers of soft-core processors or hardware units to obtain the execution times. However, the number of processors and their customizable configuration or hardware datapath being generated are limited by a target FPGA resource, and designers need to understand the FPGA-based tradeoffs that have been considered - Speed versus Area. For this experimental purpose, I defined benchmarks into DLP / HLS catalogues, which are "data" and "function" intensive respectively. The programs of DLP will be executed in LEON3 MP and LE1 CMP multi-processor systems and the programs of HLS in the LegUp Co-design system on target FPGAs. In preliminary, the performance of the soft-core processors will be examined by executing all the benchmarks. The whole story of this thesis work centres on the issue of the execute times or the speed-up and area breakdown on FPGA devices in terms of different programs