Robust control of uncertain systems: H2/H∞ control and computation of invariant sets

This thesis is mainly concerned with robust analysis and control synthesis of linear time-invariant systems with polytopic uncertainties. This topic has received considerable attention during the past decades since it offers the possibility to analyze and design controllers to cope with uncertainties. The most common and simplest approach to establish convex optimization procedures for robust analysis and synthesis problems is based on quadratic stability results, which use a single (parameter-independent) Lyapunov function for the entire uncertainty polytope. In recent years, many researchers have used parameter-dependent Lyapunov functions to provide less conservative results than the quadratic stability condition by working with parameterized Linear Matrix Inequalities (LMIs), where auxiliary scalar parameters are introduced. However, treating the scalar parameters as optimization variables leads to large computational complexity since the scalar parameters belong to an unbounded domain in general. To address this problem, we propose three distinct iterative procedures for H2 and H∞state feedback control, which are all based on true LMIs (without any scalar parameter). The first and second procedures are proposed for continuous-time and discrete-time uncertain systems, respectively. In particular, quadratic stability results can be used as a starting point for these two iterative procedures. This property ensures that the solutions obtained by our iterative procedures with one step update are no more conservative than the quadratic stability results. It is important to emphasize that, to date, for continuous-time systems, all existing methods have to introduce extra scalar parameters into their conditions in order to include the quadratic stability conditions as a special case, while our proposed iterative procedure solves a convex/LMI problem at each update. The third approach deals with the design of robust controllers for both continuous-time and discrete-time cases. It is proved that the proposed conditions contain the many existing conditions as special cases. Therefore, the third iterative procedure can compute a solution, in one step, which is at least as good as the optimal solution obtained using existing methods. All three iterative procedures can compute a sequence of non-increasing upper bounds for H2-norm and H∞-norm. In addition, if no feasible initial solution for the iterative procedures is found for some uncertain systems, we also propose two algorithms based on iterative procedures that offer the possibility of obtaining a feasible initial solution for continuous-time and discrete-time systems, respectively. Furthermore, to address the problem of analysis of H∞-norm guaranteed cost computation, a generalized problem is firstly proposed that includes both the continuous-time and discrete-time problems as special cases. A novel description of polytopic uncertainties is then derived and used to develop a relaxation approach based on the S-procedure to lift the uncertainties, which yields an LMI approach to compute H∞-norm guaranteed cost by incorporating slack variables. In this thesis, one of the main contributions is to develop convex iterative procedures for the original non-convex H2 and H∞ synthesis problems based on the novel separation result. Nonlinear and non-convex problems are general in nature and occur in other control problems; for example, the computation of tightened invariant tubes for output feedback Model Predictive Control (MPC). We consider discrete-time linear time-invariant systems with bounded state and input constraints and subject to bounded disturbances. In contrast to existing approaches which either use pre-defined control and observer gains or optimize the volume of the invariant sets for the estimation and control errors separately, we consider the problem of optimizing the volume of these two sets simultaneously to give a less conservative design.Open Acces

A looped-functional approach for robust stability analysis of linear impulsive systems

A new functional-based approach is developed for the stability analysis of linear impulsive systems. The new method, which introduces looped-functionals, considers non-monotonic Lyapunov functions and leads to LMIs conditions devoid of exponential terms. This allows one to easily formulate dwell-times results, for both certain and uncertain systems. It is also shown that this approach may be applied to a wider class of impulsive systems than existing methods. Some examples, notably on sampled-data systems, illustrate the efficiency of the approach.Comment: 13 pages, 2 figures, Accepted at Systems & Control Letter

Robust Constrained Model Predictive Control using Linear Matrix Inequalities

The primary disadvantage of current design techniques for model predictive control (MPC) is their inability to deal explicitly with plant model uncertainty. In this paper, we present a new approach for robust MPC synthesis which allows explicit incorporation of the description of plant uncertainty in the problem formulation. The uncertainty is expressed both in the time domain and the frequency domain. The goal is to design, at each time step, a state-feedback control law which minimizes a "worst-case" infinite horizon objective function, subject to constraints on the control input and plant output. Using standard techniques, the problem of minimizing an upper bound on the "worst-case" objective function, subject to input and output constraints, is reduced to a convex optimization involving linear matrix inequalities (LMIs). It is shown that the feasible receding horizon state-feedback control design robustly stabilizes the set of uncertain plants under consideration. Several extensions, such as application to systems with time-delays and problems involving constant set-point tracking, trajectory tracking and disturbance rejection, which follow naturally from our formulation, are discussed. The controller design procedure is illustrated with two examples. Finally, conclusions are presented

Robust Multi-Criteria Optimal Fuzzy Control of Continuous-Time Nonlinear Systems

This paper presents a novel fuzzy control design of continuous-time nonlinear systems with multiple performance criteria. The purpose behind this work is to improve the traditional fuzzy controller performance to satisfy several performance criteria simultaneously to secure quadratic optimality with inherent stability property together with dissipativity type of disturbance reduction. The Takagi– Sugeno fuzzy model is used in our control system design. By solving the linear matrix inequality at each time step, the control solution can be found to satisfy the mixed performance criteria. The effectiveness of the proposed technique is demonstrated by simulation of the control of the inverted pendulum system

A note on the robust stability of uncertain stochastic fuzzy systems with time-delays

Copyright [2004] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.Takagi-Sugeno (T-S) fuzzy models are now often used to describe complex nonlinear systems in terms of fuzzy sets and fuzzy reasoning applied to a set of linear submodels. In this note, the T-S fuzzy model approach is exploited to establish stability criteria for a class of nonlinear stochastic systems with time delay. Sufficient conditions are derived in the format of linear matrix inequalities (LMIs), such that for all admissible parameter uncertainties, the overall fuzzy system is stochastically exponentially stable in the mean square, independent of the time delay. Therefore, with the numerically attractive Matlab LMI toolbox, the robust stability of the uncertain stochastic fuzzy systems with time delays can be easily checked

Robust variance-constrained H∞ control for stochastic systems with multiplicative noises

This is the post print version of the article. The official published version can be obtained from the link below - Copyright 2007 Elsevier Ltd.In this paper, the robust variance-constrained H∞ control problem is considered for uncertain stochastic systems with multiplicative noises. The norm-bounded parametric uncertainties enter into both the system and output matrices. The purpose of the problem is to design a state feedback controller such that, for all admissible parameter uncertainties, (1) the closed-loop system is exponentially mean-square quadratically stable; (2) the individual steady-state variance satisfies given upper bound constraints; and (3) the prescribed noise attenuation level is guaranteed in an H∞ sense with respect to the additive noise disturbances. A general framework is established to solve the addressed multiobjective problem by using a linear matrix inequality (LMI) approach, where the required stability, the H∞ characterization and variance constraints are all easily enforced. Within such a framework, two additional optimization problems are formulated: one is to optimize the H∞ performance, and the other is to minimize the weighted sum of the system state variances. A numerical example is provided to illustrate the effectiveness of the proposed design algorithm.This work was supported in part by the Engineering and Physical Sciences Research Council (EPSRC) of the UK under Grant GR/S27658/01, the Nuffield Foundation of the UK under Grant NAL/00630/G, and the Alexander von Humboldt Foundation of Germany