Self-Calibrating Cameras Using Semidefinite Programming

Novel methods are proposed for self-calibrating a purerotating camera using semidefinite programming (SDP). Key to the approach is the use of the positive-definiteness requirement for the dual image of the absolute conic (DIAC). The problem is couched within a convex optimization framework and convergence to the global optimum is guaranteed. Experiments on various data sets indicate that the proposed algorithms more reliably deliver accurate and meaningful results. This work points the way to an alternative and more general approach to self-calibration using the advantageous properties of SDP. Algorithms are also discussed for cameras undergoing general motion

Integration of Multispectral Face Recognition and Multi-PTZ Camera Automated Surveillance for Security Applications

Due to increasing security concerns, a complete security system should consist of two major components, a computer-based face-recognition system and a real-time automated video surveillance system. A computer-based face-recognition system can be used in gate access control for identity authentication. In recent studies, multispectral imaging and fusion of multispectral narrow-band images in the visible spectrum have been employed and proven to enhance the recognition performance over conventional broad-band images, especially when the illumination changes. Thus, we present an automated method that specifies the optimal spectral ranges under the given illumination. Experimental results verify the consistent performance of our algorithm via the observation that an identical set of spectral band images is selected under all tested conditions. Our discovery can be practically used for a new customized sensor design associated with given illuminations for an improved face recognition performance over conventional broad-band images. In addition, once a person is authorized to enter a restricted area, we still need to continuously monitor his/her activities for the sake of security. Because pantilt-zoom (PTZ) cameras are capable of covering a panoramic area and maintaining high resolution imagery for real-time behavior understanding, researches in automated surveillance systems with multiple PTZ cameras have become increasingly important. Most existing algorithms require the prior knowledge of intrinsic parameters of the PTZ camera to infer the relative positioning and orientation among multiple PTZ cameras. To overcome this limitation, we propose a novel mapping algorithm that derives the relative positioning and orientation between two PTZ cameras based on a unified polynomial model. This reduces the dependence on the knowledge of intrinsic parameters of PTZ camera and relative positions. Experimental results demonstrate that our proposed algorithm presents substantially reduced computational complexity and improved flexibility at the cost of slightly decreased pixel accuracy as compared to Chen and Wang\u27s method [18]. © Versita sp. z o.o

Real-time camera motion tracking in planar view scenarios

We propose a novel method for real-time camera motion tracking in planar view scenarios. This method relies on the geometry of a tripod, an initial estimation of camera pose for the first video frame and a primitive tracking procedure. This process uses lines and circles as primitives, which are extracted applying classification and regression tree. We have applied the proposed method to high-definition videos of soccer matches. Experimental results prove that our proposal can be applied to processing high-definition video in real time. We validate the procedure by inserting virtual content in the video sequence

Camera calibration in sport event scenarios

The main goal of this paper is the design of a novel and robust methodology for calibrating cameras from a single image in sport scenarios, such as a soccer field, or a basketball or tennis court. In these sport scenarios, the only references we use to calibrate the camera are the lines and circles delimiting the different regions. The first problem we address is the extraction of image primitives, including the challenging problems of shaded regions and lens distortion. From these primitives, we automatically recognise the location of the sport court in the scene by estimating the homography which matches the actual court with its projection onto the image. This is achieved even when only a few primitives are available. Finally, from this homography, we recover the camera calibration parameters. In particular, we estimate the focal length as well as the position and orientation in the 3D space. We present some experiments on models and real courts which illustrate the accuracy of the proposed methodology

Auto-Calibration and Three-Dimensional Reconstruction for Zooming Cameras

This dissertation proposes new algorithms to recover the calibration parameters and 3D structure of a scene, using 2D images taken by uncalibrated stationary zooming cameras. This is a common configuration, usually encountered in surveillance camera networks, stereo camera systems, and event monitoring vision systems. This problem is known as camera auto-calibration (also called self-calibration) and the motivation behind this work is to obtain the Euclidean three-dimensional reconstruction and metric measurements of the scene, using only the captured images. Under this configuration, the problem of auto-calibrating zooming cameras differs from the classical auto-calibration problem of a moving camera in two major aspects. First, the camera intrinsic parameters are changing due to zooming. Second, because cameras are stationary in our case, using classical motion constraints, such as a pure translation for example, is not possible. In order to simplify the non-linear complexity of this problem, i.e., auto-calibration of zooming cameras, we have followed a geometric stratification approach. In particular, we have taken advantage of the movement of the camera center, that results from the zooming process, to locate the plane at infinity and, consequently to obtain an affine reconstruction. Then, using the assumption that typical cameras have rectangular or square pixels, the calculation of the camera intrinsic parameters have become possible, leading to the recovery of the Euclidean 3D structure. Being linear, the proposed algorithms were easily extended to the case of an arbitrary number of images and cameras. Furthermore, we have devised a sufficient constraint for detecting scene parallel planes, a useful information for solving other computer vision problems

Proc. 33. Workshop Computational Intelligence, Berlin, 23.-24.11.2023

Dieser Tagungsband enthält die Beiträge des 33. Workshops „Computational Intelligence“ der vom 23.11. – 24.11.2023 in Berlin stattfindet. Die Schwerpunkte sind Methoden, Anwendungen und Tools für ° Fuzzy-Systeme, ° Künstliche Neuronale Netze, ° Evolutionäre Algorithmen und ° Data-Mining-Verfahren sowie der Methodenvergleich anhand von industriellen und Benchmark-Problemen.The workshop proceedings contain the contributions of the 33rd workshop "Computational Intelligence" which will take place from 23.11. - 24.11.2023 in Berlin. The focus is on methods, applications and tools for ° Fuzzy systems, ° Artificial Neural Networks, ° Evolutionary algorithms and ° Data mining methods as well as the comparison of methods on the basis of industrial and benchmark problems

Tracking interacting targets in multi-modal sensors

PhDObject tracking is one of the fundamental tasks in various applications such as surveillance, sports, video conferencing and activity recognition. Factors such as occlusions, illumination changes and limited field of observance of the sensor make tracking a challenging task. To overcome these challenges the focus of this thesis is on using multiple modalities such as audio and video for multi-target, multi-modal tracking. Particularly, this thesis presents contributions to four related research topics, namely, pre-processing of input signals to reduce noise, multi-modal tracking, simultaneous detection and tracking, and interaction recognition. To improve the performance of detection algorithms, especially in the presence of noise, this thesis investigate filtering of the input data through spatio-temporal feature analysis as well as through frequency band analysis. The pre-processed data from multiple modalities is then fused within Particle filtering (PF). To further minimise the discrepancy between the real and the estimated positions, we propose a strategy that associates the hypotheses and the measurements with a real target, using a Weighted Probabilistic Data Association (WPDA). Since the filtering involved in the detection process reduces the available information and is inapplicable on low signal-to-noise ratio data, we investigate simultaneous detection and tracking approaches and propose a multi-target track-beforedetect Particle filtering (MT-TBD-PF). The proposed MT-TBD-PF algorithm bypasses the detection step and performs tracking in the raw signal. Finally, we apply the proposed multi-modal tracking to recognise interactions between targets in regions within, as well as outside the cameras’ fields of view. The efficiency of the proposed approaches are demonstrated on large uni-modal, multi-modal and multi-sensor scenarios from real world detections, tracking and event recognition datasets and through participation in evaluation campaigns

Distributed Robotic Vision for Calibration, Localisation, and Mapping

This dissertation explores distributed algorithms for calibration, localisation, and mapping in the context of a multi-robot network equipped with cameras and onboard processing, comparing against centralised alternatives where all data is transmitted to a singular external node on which processing occurs. With the rise of large-scale camera networks, and as low-cost on-board processing becomes increasingly feasible in robotics networks, distributed algorithms are becoming important for robustness and scalability. Standard solutions to multi-camera computer vision require the data from all nodes to be processed at a central node which represents a significant single point of failure and incurs infeasible communication costs. Distributed solutions solve these issues by spreading the work over the entire network, operating only on local calculations and direct communication with nearby neighbours. This research considers a framework for a distributed robotic vision platform for calibration, localisation, mapping tasks where three main stages are identified: an initialisation stage where calibration and localisation are performed in a distributed manner, a local tracking stage where visual odometry is performed without inter-robot communication, and a global mapping stage where global alignment and optimisation strategies are applied. In consideration of this framework, this research investigates how algorithms can be developed to produce fundamentally distributed solutions, designed to minimise computational complexity whilst maintaining excellent performance, and designed to operate effectively in the long term. Therefore, three primary objectives are sought aligning with these three stages

Vision based navigation in a dynamic environment

Cette thèse s'intéresse au problème de la navigation autonome au long cours de robots mobiles à roues dans des environnements dynamiques. Elle s'inscrit dans le cadre du projet FUI Air-Cobot. Ce projet, porté par Akka Technologies, a vu collaborer plusieurs entreprises (Akka, Airbus, 2MORROW, Sterela) ainsi que deux laboratoires de recherche, le LAAS et Mines Albi. L'objectif est de développer un robot collaboratif (ou cobot) capable de réaliser l'inspection d'un avion avant le décollage ou en hangar. Différents aspects ont donc été abordés : le contrôle non destructif, la stratégie de navigation, le développement du système robotisé et de son instrumentation, etc. Cette thèse répond au second problème évoqué, celui de la navigation. L'environnement considéré étant aéroportuaire, il est hautement structuré et répond à des normes de déplacement très strictes (zones interdites, etc.). Il peut être encombré d'obstacles statiques (attendus ou non) et dynamiques (véhicules divers, piétons, ...) qu'il conviendra d'éviter pour garantir la sécurité des biens et des personnes. Cette thèse présente deux contributions. La première porte sur la synthèse d'un asservissement visuel permettant au robot de se déplacer sur de longues distances (autour de l'avion ou en hangar) grâce à une carte topologique et au choix de cibles dédiées. De plus, cet asservissement visuel exploite les informations fournies par toutes les caméras embarquées. La seconde contribution porte sur la sécurité et l'évitement d'obstacles. Une loi de commande basée sur les spirales équiangulaires exploite seulement les données sensorielles fournies par les lasers embarqués. Elle est donc purement référencée capteur et permet de contourner tout obstacle, qu'il soit fixe ou mobile. Il s'agit donc d'une solution générale permettant de garantir la non collision. Enfin, des résultats expérimentaux, réalisés au LAAS et sur le site d'Airbus à Blagnac, montrent l'efficacité de la stratégie développée.This thesis is directed towards the autonomous long range navigation of wheeled robots in dynamic environments. It takes place within the Air-Cobot project. This project aims at designing a collaborative robot (cobot) able to perform the preflight inspection of an aircraft. The considered environment is then highly structured (airport runway and hangars) and may be cluttered with both static and dynamic unknown obstacles (luggage or refueling trucks, pedestrians, etc.). Our navigation framework relies on previous works and is based on the switching between different control laws (go to goal controller, visual servoing, obstacle avoidance) depending on the context. Our contribution is twofold. First of all, we have designed a visual servoing controller able to make the robot move over a long distance thanks to a topological map and to the choice of suitable targets. In addition, multi-camera visual servoing control laws have been built to benefit from the image data provided by the different cameras which are embedded on the Air-Cobot system. The second contribution is related to obstacle avoidance. A control law based on equiangular spirals has been designed to guarantee non collision. This control law, based on equiangular spirals, is fully sensor-based, and allows to avoid static and dynamic obstacles alike. It then provides a general solution to deal efficiently with the collision problem. Experimental results, performed both in LAAS and in Airbus hangars and runways, show the efficiency of the developed techniques

Determination and development of cost effective techniques to monitor recreational catch and effort in Western Australian demersal finfish fisheries: Final Report for FRDC Project 2005/034 and WAMSI Subproject 4.4.3

Objectives1.Complete a series of concurrent catch and effort surveys of the West Coast Demersal Recreational Fishery using a variety of survey techniques.2.Compare the precision and accuracy of estimates generated using these various techniques3.Usingcostbenefitanalysis,produceaseriesofoptionstomonitorannualcatchandeffortfora range of precision levels and indicator species4.Development of cost effective methods for monitoring the catch of the non-commercial sector