An Optimal Backoff Time-Based Internetwork Interference Mitigation Method in Wireless Body Area Network

When multiple Wireless Body Area Networks (WBANs) are aggregated, the overlapping region of their communications will result in internetwork interference, which could impose severe impacts on the reliability of WBAN performance. Therefore, how to mitigate the internetwork interference becomes the key problem to be solved urgently in practical applications of WBAN. However, most of the current researches on internetwork interference focus on traditional cellular networks and large-scale wireless sensor networks. In this paper, an Optimal Backoff Time Interference Mitigation Algorithm (OBTIM) is proposed. This method performs rescheduling or channel switching when the performance of the WBANs falls below tolerance, utilizing the cell neighbour list established by the beacon method. Simulation results show that the proposed method improves the channel utilization and the network throughput, and in the meantime, reduces the collision probability and energy consumption, when compared with the contention-based beacon schedule scheme

Dynamic Channel Access Scheme for Interference Mitigation in Relay-assisted Intra-WBANs

This work addresses problems related to interference mitigation in a single wireless body area network (WBAN). In this paper, We propose a distributed \textit{C}ombined carrier sense multiple access with collision avoidance (CSMA/CA) with \textit{F}lexible time division multiple access (\textit{T}DMA) scheme for \textit{I}nterference \textit{M}itigation in relay-assisted intra-WBAN, namely, CFTIM. In CFTIM scheme, non interfering sources (transmitters) use CSMA/CA to communicate with relays. Whilst, high interfering sources and best relays use flexible TDMA to communicate with coordinator (C) through using stable channels. Simulation results of the proposed scheme are compared to other schemes and consequently CFTIM scheme outperforms in all cases. These results prove that the proposed scheme mitigates interference, extends WBAN energy lifetime and improves the throughput. To further reduce the interference level, we analytically show that the outage probability can be effectively reduced to the minimal.Comment: 2015 IEEE International Conference on Protocol Engineering (ICPE) and International Conference on New Technologies of Distributed Systems (NTDS), Paris, France. arXiv admin note: text overlap with arXiv:1602.0865

Multi-constrained mechanism for intra-body area network quality-of-service aware routing in wireless body sensor networks

Wireless Body Sensor Networks (WBSNs) have witnessed tremendous research interests in a wide range of medical and non-medical fields. In the delaysensitive application scenarios, the critical data packets are highly delay-sensitive which require some Quality-of-Service (QoS) to reach the intended destinations. The categorization of data packets and selection of poor links may have detrimental impacts on overall performance of the network. In WBSN, various biosensors transmit the sensed data towards a destination for further analysis. However, for an efficient data transmission, it is very important to transmit the sensed data towards the base station by satisfying the QoS multi-constrained requirements of the healthcare applications in terms of least end-to-end delay and high reliability, throughput, Packet Delivery Ratio (PDR), and route stability performance. Most of the existing WBSN routing schemes consider traffic prioritization to solve the slot allocation problem. Consequently, the data transmission may face high delays, packet losses, retransmissions, lack of bandwidth, and insufficient buffer space. On the other hand, an end-to-end route is discovered either using a single or composite metric for the data transmission. Thus, it affects the delivery of the critical data through a less privileged manner. Furthermore, a conventional route repair method is considered for the reporting of broken links which does not include surrounding interference. As such, this thesis presents the Multi-constrained mechanism for Intra- Body Area Network QoS aware routing (MIQoS) with Low Latency Traffic Prioritization (LLTP), Optimized Route Discovery (ORD), and Interference Adaptive Route Repair (IARR) schemes for the healthcare application of WBSN with an objective of improving performance in terms of end-to-end delay, route stability, and throughput. The proposed LLTP scheme considers various priority queues with an optimized scheduling mechanism that dynamically identifies and prioritizes the critical data traffic in an emergency situation to enhance the critical data transmission. Consequently, this will avoid unnecessary queuing delay. The ORD scheme incorporates an improved and multi-facet routing metric, Link Quality Metric (LQM) optimizes the route selection by considering link delay, link delivery ratio, and link interference ratio. The IARR scheme identifies the links experiencing transmission issues due to channel interference and makes a coherent decision about route breakage based on the long term link performance to avoid unnecessary route discovery notifications. The simulation results verified the improved performance in terms of reducing the end-to-end delay by 29%, increasing the throughput by 22% and route stability by 26% as compared to the existing routing schemes such as TTRP, PA-AODV and standard AODV. In conclusion, MIQoS proves to be a suitable routing mechanism for a wide range of interesting applications of WBSN that require fast, reliable and multi-hop communication in heavily loaded network traffic scenarios

Interference mitigation in cognitive femtocell networks

“A thesis submitted to the University of Bedfordshire, in partial fulfilment of the requirements for the degree of Doctor of Philosophy”.Femtocells have been introduced as a solution to poor indoor coverage in cellular communication which has hugely attracted network operators and stakeholders. However, femtocells are designed to co-exist alongside macrocells providing improved spatial frequency reuse and higher spectrum efficiency to name a few. Therefore, when deployed in the two-tier architecture with macrocells, it is necessary to mitigate the inherent co-tier and cross-tier interference. The integration of cognitive radio (CR) in femtocells introduces the ability of femtocells to dynamically adapt to varying network conditions through learning and reasoning. This research work focuses on the exploitation of cognitive radio in femtocells to mitigate the mutual interference caused in the two-tier architecture. The research work presents original contributions in mitigating interference in femtocells by introducing practical approaches which comprises a power control scheme where femtocells adaptively controls its transmit power levels to reduce the interference it causes in a network. This is especially useful since femtocells are user deployed as this seeks to mitigate interference based on their blind placement in an indoor environment. Hybrid interference mitigation schemes which combine power control and resource/scheduling are also implemented. In a joint threshold power based admittance and contention free resource allocation scheme, the mutual interference between a Femtocell Access Point (FAP) and close-by User Equipments (UE) is mitigated based on admittance. Also, a hybrid scheme where FAPs opportunistically use Resource Blocks (RB) of Macrocell User Equipments (MUE) based on its traffic load use is also employed. Simulation analysis present improvements when these schemes are applied with emphasis in Long Term Evolution (LTE) networks especially in terms of Signal to Interference plus Noise Ratio (SINR)

Enhancement of The IEEE 802.15.4 Standard By Energy Efficient Cluster Scheduling

The IEEE 802.15.4 network is gaining popularity due to its wide range of application in Industries and day to day life. Energy Conservation in IEEE 802.15.4 nodes is always a concern for the designers as the life time of a network depends mainly on minimizing the energy consumption in the nodes. In ZigBee cluster-tree network, the existing literature does not provide combined solution for co-channel interference and power efficient scheduling. In addition, the technique that prevents network collision has not been provided. Delay and reliability issues are not addressed in the QoS-aware routing. Congestion is one of the major challenges in IEEE 802.15.4 Network. This network also has issues in admitting real time flows. The aim of the present research is to overcome the issues mentioned above by designing Energy Efficient Cluster Scheduling and Interference Mitigation, QoS Aware Inter-Cluster Routing Protocol and Adaptive Data Rate Control for Clustered Architecture for IEEE 802.15.4 Networks. To overcome the issue of Energy efficiency and network collision energy efficient cluster scheduling and interference mitigation for IEEE 802.15.4 Network is proposed. It uses a time division cluster scheduling technique that offers energy efficiency in the cluster-tree network. In addition, an interference mitigation technique is demonstrated which detects and mitigates the channel interference based on packet-error detection and repeated channel-handoff command transmission. For the issues of delay and reliability in cluster network, QoS aware intercluster routing protocol for IEEE 802.15.4 Networks is proposed. It consists of some modules like reliability module, packet classifier, hello protocol module, routing service module. Using the Packet classifier, the packets are classified into the data and hello packets. The data packets are classified based on the priority. Neighbour table is constructed to maintain the information of neighbour nodes reliabilities by Hello protocol module. Moreover, routing table is built using the routing service module. The delay in the route is controlled by delay metrics, which is a sum of queuing delay and transmission delay. For the issues of congestion and admit real-time flows an Adaptive data rate control for clustered architecture in IEEE 802.15.4 Networks is proposed. A network device is designed to regulate its data rate adaptively using the feedback message i.e. Congestion Notification Field (CNF) in beacon frame received from the receiver side. The network device controls or changes its data rate based on CNF value. Along with this scalability is considered by modifying encoding parameters using Particle Swarm Optimization (PSO) to balance the target output rate for supporting high data rate. Simulation results show that the proposed techniques significantly reduce the energy consumption by 17% and the network collision, enhance the performance, mitigate the effect of congestion, and admit real-time flows

Mitigation of packet loss with end-to-end delay in wireless body area network applications

The wireless body area network (WBAN) has been proposed to offer a solution to the problem of population ageing, shortage in medical facilities and different chronic diseases. The development of this technology has been further fueled by the demand for real-time application for monitoring these cases in networks. The integrity of communication is constrained by the loss of packets during communication affecting the reliability of WBAN. Mitigating the loss of packets and ensuring the performance of the network is a challenging task that has sparked numerous studies over the years. The WBAN technology as a problem of reducing network lifetime; thus, in this paper, we utilize cooperative routing protocol (CRP) to improve package delivery via end-to-end latency and increase the length of the network lifetime. The end-to-end latency was used as a metric to determine the significance of CRP in WBAN routing protocols. The CRP increased the rate of transmission of packets to the sink and mitigate packet loss. The proposed solution has shown that the end-to-end delay in the WBAN is considerably reduced by applying the cooperative routing protocol. The CRP technique attained a delivery ratio of 0.8176 compared to 0.8118 when transmitting packets in WBAN