Multicast Mobility in Mobile IP Version 6 (MIPv6) : Problem Statement and Brief Survey

Publisher PD

Multicast source mobility support for regenerative satellite networks

YesSatellite communications provides an effective solution to the ever increasing demand for mobile and ubiquitous communications especially in areas where terrestrial communication infrastructure is not present. IP multicasting is a bandwidth saving technology which could become an indispensable means of group communication over satellites since it can utilise the scarce and expensive satellite resources in an efficient way. In Source-Specific Multicast (SSM) the data is sent through a multicast tree from the source to all the receivers. However, if a source is a mobile node moving from one network to another, then special mechanisms are required to make sure this multicast tree does not break. Until now, while many research efforts have been made to provide IP multicast for the mobile nodes, they are mainly focused on terrestrial networks. Unfortunately, the terrestrial mobile multicast schemes are not directly applicable in a satellite environment. This paper, proposes a new mechanism to support multicast source mobility in SSM based applications for a mesh multi-beam satellite network with receivers both within the satellite network and in the Internet. In the proposed mechanism, the SSM receivers continue to receive multicast traffic from the mobile source despite the fact that the IP address of the source keeps on changing as it changes its point of attachment from one satellite gateway (GW) to another. The proposed scheme is evaluated and the results compared with the mobile IP home subscription (MIP HS)-based approach. The results show that the proposed scheme outperforms the MIP HS-based approach in terms of signalling cost and packet delivery cost

Satellite-MEC Integration for 6G Internet of Things: Minimal Structures, Advances, and Prospects

The sixth-generation (6G) network is envisioned to shift its focus from the service requirements of human beings' to those of Internet-of-Things (IoT) devices'. Satellite communications are indispensable in 6G to support IoT devices operating in rural or disastrous areas. However, satellite networks face the inherent challenges of low data rate and large latency, which may not support computation-intensive and delay-sensitive IoT applications. Mobile Edge Computing (MEC) is a burgeoning paradigm by extending cloud computing capabilities to the network edge. By utilizing MEC technologies, the resource-limited IoT devices can access abundant computation resources with low latency, which enables the highly demanding applications while meeting strict delay requirements. Therefore, an integration of satellite communications and MEC technologies is necessary to better enable 6G IoT. In this survey, we provide a holistic overview of satellite-MEC integration. We first discuss the main challenges of the integrated satellite-MEC network and propose three minimal integrating structures. For each minimal structure, we summarize the current advances in terms of their research topics, after which we discuss the lessons learned and future directions of the minimal structure. Finally, we outline potential research issues to envision a more intelligent, more secure, and greener integrated satellite-MEC network

Integration of unidirectional technologies into wireless back-haul architecture

This thesis was submitted for the degree of Docter of Philosophy and awarded by Brunel University.Back-haul infrastructures of today's wireless operators must support the triple-play services demanded by the market or regulatory bodies. To cope with increasing capacity demand, the EU FP7 project CARMEN has developed a cost-effective heterogeneous multi-radio wireless back-haul architecture, which may also leverage the native multicast capabilities of broadcast technologies such as DVB-T to off-load high-bandwidth broadcast content delivery. However, the integration of such unidirectional technologies into a packet-switched architecture requires careful considerations. The contribution of this thesis is the investigation, design and evaluation of protocols and mechanisms facilitating the integration of such unidirectional technologies into the wireless back-haul architecture so that they can be configured and utilized by the spectrum and capacity optimization modules. This integration mainly concerns the control plane and, in particular, the aspects related to resource and capability descriptions, neighborhood, link and Multi Protocol Label Switching (MPLS) Label-Switched Path (LSP) monitoring, unicast and multicast LSP signalling as well as topology forming and maintenance. During the course of this study we have analyzed the problem space, proposed solutions to the resulting research questions and evaluated our approach. Our results show that the now Unidirectional Technology (UDT)-aware architecture can readily consider Unidirectional Technologies (UDTs) to distribute, for example, broadcast content

SDN/NFV-enabled satellite communications networks: opportunities, scenarios and challenges

In the context of next generation 5G networks, the satellite industry is clearly committed to revisit and revamp the role of satellite communications. As major drivers in the evolution of (terrestrial) fixed and mobile networks, Software Defined Networking (SDN) and Network Function Virtualisation (NFV) technologies are also being positioned as central technology enablers towards improved and more flexible integration of satellite and terrestrial segments, providing satellite network further service innovation and business agility by advanced network resources management techniques. Through the analysis of scenarios and use cases, this paper provides a description of the benefits that SDN/NFV technologies can bring into satellite communications towards 5G. Three scenarios are presented and analysed to delineate different potential improvement areas pursued through the introduction of SDN/NFV technologies in the satellite ground segment domain. Within each scenario, a number of use cases are developed to gain further insight into specific capabilities and to identify the technical challenges stemming from them.Peer ReviewedPostprint (author's final draft

A practical key management and distribution system for IPTV conditional access

Conditional Access (CA) is widely used by pay-television operators to restrict access to content to authorised subscribers. Commercial CA solutions are available for structured broadcast and Internet Protocol Television (IPTV) environments, as well as Internet-based video-on-demand services, however these solutions are mostly proprietary, often inefficient for use on IP networks, and frequently depend on smartcards for maintaining security. An efficient, exible, and open conditional access system that can be implemented practically by operators with large numbers of subscribers would be beneficial to those operators and Set-Top-Box manufacturers in terms of cost savings for royalties and production costs. Furthermore, organisations such as the South African Broadcasting Corporation that are transitioning to Digital-Terrestrial-Television could use an open Conditional Access System (CAS) to restrict content to viewing within national borders and to ensure that only valid TV licence holders are able to access content. To this end, a system was developed that draws from the area of group key management. Users are grouped according to their subscription selections and these groups are authorised for each selection's constituent services. Group keys are updated with a key-tree based approach that includes a novel method for growing full trees that outperforms the standard method. The relations that are created between key trees are used to establish a hierarchy of keys which allows exible selection of services whilst maintaining their cryptographic protection. Conditions for security without dependence on smartcards are defined, and the system is expandable to multi-home viewing scenarios. A prototype implementation was used to assess the proposed system. Total memory consumption of the key-server, bandwidth usage for transmission of key updates, and client processing and storage of keys were all demonstrated to be highly scalable with number of subscribers and number of services

IP Mobile Multicast over Next Generation Satellite Networks. Design and Evaluation of a Seamless Mobility Framework for IP Multicast Communications over a Multi-beam Geostationary Satellite Network

The inherent broadcast nature of satellites, their global coverage and direct access to a large number of subscribers give satellites unrivalled advantages in supporting IP multicast applications. A new generation of satellite systems that support regenerative on-board processors and multiple spot beam technology have opened new possibilities of implementing IP multicast communication over satellites. These new features enable satellites to make efficient use of their allocated bandwidth resources and provide cost effective network services but equally, create new challenges for mobile satellite terminals. IP mobility support in general and IP mobile multicast support in particular on mobile satellite terminals like the ones mounted on continental flights, maritime vessels, etc., still remain big challenges that have received very little attention from the research community. Up till now, there are no proposed mechanisms to support IP multicast for mobile receivers/sources in multi-beam satellite networks in open literature. This study explores the suitability of IP multicast mobility support schemes defined for terrestrial networks in a satellite environment and proposes novel schemes based on the concepts of Home and Remote subscription-based approaches, multiple interface and PMIPv6 protocol. Detailed analysis and comparison of results obtained from the proposed schemes, Mobile IP (MIP) Home and Remote subscription-based approaches (for terrestrial networks) when implemented on a reference multi-beam satellite network are presented. From these results, the proposed schemes outperform the MIP Home and Remote subscription-based approaches in terms of gateway handover latency, number of multicast packets lost and signalling cost over the satellite air interface

Soluções de broadcast para redes 4G

Mestrado em Engenharia Electrónica e de TelecomunicaçõesA primeira difusão de conteúdos video e audio teve um forte impacto no quotidiano da população que assistiu a uma revolução nos modelos de transmissão de informação e de entretenimento. A evolução desde então foi significativa, e já na era digital, encontramo-nos face a uma nova sub-elevação da metodologia e do conceito subjacentes à transmissão de conteudos multimédia. O mundo actual apresenta, contudo, diferentes requisitos, de entre os quais se destacam a procura pela alta definição e mobilidade. A mobilidade tem sido um particular foco de atenção por parte dos operadores que exploram agora modelos para entregar uma vasta gama de serviços que sejam atractivos para os utilizadores. Esta dissertação apresenta um sumário das tecnologias emergentes de broadcast que se distinguem nas várias partes do mundo com a sua particular incidência geográfica, características e cenários de aplicação. É ainda apresentada uma arquitectura 4G abordando assuntos inerentes à mobilidade e qualidade de serviço com particular incidência nos aspectos relacionados com a integração de uma tecnologia de broadcast particular. Para avaliação da arquitectura proposta foram efectuados estudos com base num equipamento de broadcast na sua versão comercial, permitindo desta forma obter uma análise que ilustra o que os operadores podem esperar do estado actual dos dispositivos. Os resultados permitiram retirar ilações sobre o comportamento de um equipamento considerado como um produto final a disponibilizar aos operadores, quando integrado num ambiente 4G com suporte de mobilidade e QoS. Nomeadamente é discutida a sua aplicabildiade tendo em linha de conta as desvantagens introduzidas pelas características inerentes à própria tecnologia.Broadcast of video and audio through analogical television completely changed the paradigm of information and entertainment divulgation. Today, in the “digital era”, the Analogue Switch Off revolution is being held. Manufacturers and operators already show concerns regarding the support of mobility, quality of experience and of service. Delivering competitive High Definition contents and providing solutions for the average “on-the-move” user are two of the most important issues to be dealt by the service providers, which are also within the analysis scope of this work. This dissertation presents an overview on the most relevant broadcast technologies which are assumed to be of relative acceptance in their respective target market. It presents their main characteristics and applicability. 4G architectural concepts are also analyzed, closely dealing with mobility and quality of service provisioning, with particular focus on the seamless integration of broadcast technologies. As a mean to evaluate the feasibility of integrating broadcast technologies with 4G architectures, a performance evaluation study was performed using commercial equipment. In this way a several set of considerations constructed illustrating the features and functionalities which operators can expect or disregard from professional commercial broadcasting devices. Results allow the withdrawing of conclusions concerning the integration of a final broadcasting solution when incorporated within a 4G environment with QoS and mobility support. Its applicability is evaluated having in mind the performance drawbacks introduced by the specific technology, and generalized towards the gathering of more general conclusions which consider the main characteristics of the commercial broadcasting devices

Co-design of Security Aware Power System Distribution Architecture as Cyber Physical System

The modern smart grid would involve deep integration between measurement nodes, communication systems, artificial intelligence, power electronics and distributed resources. On one hand, this type of integration can dramatically improve the grid performance and efficiency, but on the other, it can also introduce new types of vulnerabilities to the grid. To obtain the best performance, while minimizing the risk of vulnerabilities, the physical power system must be designed as a security aware system. In this dissertation, an interoperability and communication framework for microgrid control and Cyber Physical system enhancements is designed and implemented taking into account cyber and physical security aspects. The proposed data-centric interoperability layer provides a common data bus and a resilient control network for seamless integration of distributed energy resources. In addition, a synchronized measurement network and advanced metering infrastructure were developed to provide real-time monitoring for active distribution networks. A hybrid hardware/software testbed environment was developed to represent the smart grid as a cyber-physical system through hardware and software in the loop simulation methods. In addition it provides a flexible interface for remote integration and experimentation of attack scenarios. The work in this dissertation utilizes communication technologies to enhance the performance of the DC microgrids and distribution networks by extending the application of the GPS synchronization to the DC Networks. GPS synchronization allows the operation of distributed DC-DC converters as an interleaved converters system. Along with the GPS synchronization, carrier extraction synchronization technique was developed to improve the system’s security and reliability in the case of GPS signal spoofing or jamming. To improve the integration of the microgrid with the utility system, new synchronization and islanding detection algorithms were developed. The developed algorithms overcome the problem of SCADA and PMU based islanding detection methods such as communication failure and frequency stability. In addition, a real-time energy management system with online optimization was developed to manage the energy resources within the microgrid. The security and privacy were also addressed in both the cyber and physical levels. For the physical design, two techniques were developed to address the physical privacy issues by changing the current and electromagnetic signature. For the cyber level, a security mechanism for IEC 61850 GOOSE messages was developed to address the security shortcomings in the standard