Robot Autonomy for Surgery

Autonomous surgery involves having surgical tasks performed by a robot operating under its own will, with partial or no human involvement. There are several important advantages of automation in surgery, which include increasing precision of care due to sub-millimeter robot control, real-time utilization of biosignals for interventional care, improvements to surgical efficiency and execution, and computer-aided guidance under various medical imaging and sensing modalities. While these methods may displace some tasks of surgical teams and individual surgeons, they also present new capabilities in interventions that are too difficult or go beyond the skills of a human. In this chapter, we provide an overview of robot autonomy in commercial use and in research, and present some of the challenges faced in developing autonomous surgical robots

Recent trends, technical concepts and components of computer-assisted orthopedic surgery systems: A comprehensive review

Computer-assisted orthopedic surgery (CAOS) systems have become one of the most important and challenging types of system in clinical orthopedics, as they enable precise treatment of musculoskeletal diseases, employing modern clinical navigation systems and surgical tools. This paper brings a comprehensive review of recent trends and possibilities of CAOS systems. There are three types of the surgical planning systems, including: systems based on the volumetric images (computer tomography (CT), magnetic resonance imaging (MRI) or ultrasound images), further systems utilize either 2D or 3D fluoroscopic images, and the last one utilizes the kinetic information about the joints and morphological information about the target bones. This complex review is focused on three fundamental aspects of CAOS systems: their essential components, types of CAOS systems, and mechanical tools used in CAOS systems. In this review, we also outline the possibilities for using ultrasound computer-assisted orthopedic surgery (UCAOS) systems as an alternative to conventionally used CAOS systems.Web of Science1923art. no. 519

3D-printing techniques in a medical setting : a systematic literature review

Background: Three-dimensional (3D) printing has numerous applications and has gained much interest in the medical world. The constantly improving quality of 3D-printing applications has contributed to their increased use on patients. This paper summarizes the literature on surgical 3D-printing applications used on patients, with a focus on reported clinical and economic outcomes. Methods: Three major literature databases were screened for case series (more than three cases described in the same study) and trials of surgical applications of 3D printing in humans. Results: 227 surgical papers were analyzed and summarized using an evidence table. The papers described the use of 3D printing for surgical guides, anatomical models, and custom implants. 3D printing is used in multiple surgical domains, such as orthopedics, maxillofacial surgery, cranial surgery, and spinal surgery. In general, the advantages of 3D-printed parts are said to include reduced surgical time, improved medical outcome, and decreased radiation exposure. The costs of printing and additional scans generally increase the overall cost of the procedure. Conclusion: 3D printing is well integrated in surgical practice and research. Applications vary from anatomical models mainly intended for surgical planning to surgical guides and implants. Our research suggests that there are several advantages to 3D- printed applications, but that further research is needed to determine whether the increased intervention costs can be balanced with the observable advantages of this new technology. There is a need for a formal cost-effectiveness analysis

Surgical GPS Proof of Concept for Scoliosis Surgery

Scoliotic deformities may be addressed with either anterior or posterior approaches for scoliosis correction procedures. While typically quite invasive, the impact of these operations may be reduced through the use of computer-assisted surgery. A combination of physician-designated anatomical landmarks and surgical ontologies allows for real-time intraoperative guidance during computer-assisted surgical interventions. Predetermined landmarks are labeled on an identical patient model, which seeks to encompass vertebrae, intervertebral disks, ligaments, and other soft tissues. The inclusion of this anatomy permits the consideration of hypothetical forces that are previously not well characterized in a patient-specific manner. Updated ontologies then suggest procedural directions throughout the surgical corridor, observing the positioning of both the physician and the anatomical landmarks of interest at the present moment. Merging patient-specific models, physician-designated landmarks, and ontologies to produce real-time recommendations magnifies the successful outcome of scoliosis correction through enhanced pre-surgical planning, reduced invasiveness, and shorted recovery time

A timely computer-aided detection system for acute ischemic and hemorrhagic stroke on CT in an emergency environment

Standalone Presentations: no. LL-IN1105BACKGROUND: When a patient is accepted in the emergency room suspected of stroke, time is of the most importance. The infarct brain area suffers irreparable damage as soon as three hours after the onset of stroke symptoms. Non-contrast CT scan is the standard first line of investigation used to identify hemorrhagic stroke cases. However, CT brain images do not show hyperacute ischemia and small hemorrhage clearly and thus may be missed by emergency physicians. We reported a timely computer-aided detection (CAD) system for small hemorrhages on CT that has been successfully developed as an aid to ER physicians to help improve detection for Acute Intracranial Hemorrhage (AIH). This CAD system has been enhanced for diagnosis of acute ischemic stroke in addition to hemorrhagic stroke, which becomes a more complete and clinically useful tool for assisting emergency physicians and radiologists. In the detection algorithm, brain matter is first segmented, realigned, and left-right brain symmetry is evaluated. As in the AIH system, the system confirms hemorrhagic stroke by detecting blood presence with anatomical and medical knowledge-based criteria. For detecting ischemia, signs such as regional hypodensity, blurring of grey and white matter differentiation, effacement of cerebral sulci, and hyperdensity in middle cerebral artery, are evaluated …published_or_final_versio

A 3D computed tomography based tool for orthopedic surgery planning

Series : Lecture notes in computational vision and biomechanics, vol. 19The preparation of a plan is essential for a surgery to take place in the best way possible and also for shortening patient’s recovery times. In the orthopedic case, planning has an accentuated significance due to the close relation between the degree of success of the surgery and the patient recovering time. It is important that surgeons are provided with tools that help them in the planning task, in order to make it more reliable and less time consuming. In this paper, we present a 3D Computed Tomography based solution and its implementation as an OsiriX plugin for orthopedic surgery planning. With the developed plugin, the surgeon is able to manipulate a three-dimensional isosurface rendered from the selected imaging study (a CT scan). It is possible to add digital representations of physical implants (surgical templates), in order to evaluate the feasibility of a plan. These templates are STL files generated from CAD models. There is also the feature to extract new isosurfaces of different voxel values and slice the final 3D model according to a predefined plane, enabling a 2D analysis of the planned solution. Finally, we discuss how the proposed application assists the surgeon in the planning process in an alternative way, where it is possible to three-dimensionally analyze the impact of a surgical intervention on the patient.(undefined

Intraoperative Planning and Execution of Arbitrary Orthopedic Interventions Using Handheld Robotics and Augmented Reality

The focus of this work is a generic, intraoperative and image-free planning and execution application for arbitrary orthopedic interventions using a novel handheld robotic device and optical see-through glasses (AR). This medical CAD application enables the surgeon to intraoperatively plan the intervention directly on the patient’s bone. The glasses and all the other instruments are accurately calibrated using new techniques. Several interventions show the effectiveness of this approach

Unveiling the prospects of point-of-care 3D printing of Polyetheretherketone (PEEK) patient-specific implants

Additive manufacturing (AM) or three-dimensional (3D) printing is rapidly gaining acceptance in the healthcare sector. With the availability of low-cost desktop 3D printers and inexpensive materials, in-hospital or point-of-care (POC) manufacturing has gained considerable attention in personalized medicine. Material extrusion-based [Fused Filament Fabrication (FFF)] 3D printing of low-temperature thermoplastic polymer is the most commonly used 3D printing technology in hospitals due to its ease of operability and availability of low-cost machines. However, this technology has been limited to the production of anatomical biomodels, surgical guides, and prosthetic aids and has not yet been adopted into the mainstream production of patient-specific or customized implants. Polyetheretherketone (PEEK), a high-performance thermoplastic polymer, has been used mainly in reconstructive surgeries as a reliable alternative to other alloplastic materials to fabricate customized implants. With advancements in AM systems, prospects for customized 3D printed surgical implants have emerged, increasing attention for POC manufacturing. A customized implant may be manufactured within few hours using 3D printing, allowing hospitals to become manufacturers. However, manufacturing customized implants in a hospital environment is challenging due to the number of actions necessary to design and fabricate the implants. The focus of this thesis relies on material extrusion-based 3D printing of PEEK patient-specific implants (PSIs). The ambitious challenge was to bridge the performance gap between 3D printing of PEEK PSIs for reconstructive surgery and the clinical applicability at the POC by taking advantage of recent developments in AM systems. The main reached milestones of this project include: (i) assessment of the fabrication feasibility of PEEK surgical implants using material extrusion-based 3D printing technology, (ii) incorporation of a digital clinical workflow for POC manufacturing, (iii) assessment of the clinical applicability of the POC manufactured patient-specific PEEK scaphoid prosthesis, (iv) visualization and quantification of the clinical reliability of the POC manufactured patient-specific PEEK cranial implants, and (v) assessment of the clinical performance of the POC manufactured porous patient-specific PEEK orbital implants. During this research work, under the first study, we could demonstrate the prospects of FFF 3D printing technology for POC PEEK implant manufacturing. It was established that FFF 3D printing of PEEK allows the construction of complex anatomical geometries which cannot be manufactured using other technologies. With a clinical digital workflow implementation at the POC, we could further illustrate a smoother integration and faster implant production (within two hours) potential for a complex-shaped, patented PEEK patient-specific scaphoid prosthesis. Our results revealed some key challenges during the FFF printing process, exploring the applicability of POC manufactured FFF 3D printed PEEK customized implants in craniofacial reconstructions. It was demonstrated that optimal heat distribution around the cranial implants and heat management during the printing process are essential parameters that affect crystallinity, and thus the quality of the FFF 3D printed PEEK cranial implants. At this stage of the investigation, it was observed that the root mean square (RMS) values for dimensional accuracy revealed higher deviations in large-sized cranial prostheses with “horizontal lines” characteristics. Further optimization of the 3D printer, a layer-by-layer increment in the airflow temperature was done, which improved the performance of the FFF PEEK printing process for large-sized cranial implants. We then evaluated the potential clinical reliability of the POC manufactured 3D printed PEEK PSIs for cranial reconstruction by quantitative assessment of geometric, morphological, and biomechanical characteristics. It was noticed that the 3D printed customized cranial implants had high dimensional accuracy and repeatability, displaying clinically acceptable morphologic similarity concerning fit and contours continuity. However, the tested cranial implants had variable peak load values with discrete fracture patterns from a biomechanical standpoint. The implants with the highest peak load had a strong bonding with uniform PEEK fusion and interlayer connectivity, while air gaps and infill fusion lines were observed in implants with the lowest strength. The results of this preclinical study were in line with the clinical applicability of cranial implants; however, the biomechanical attribute can be further improved. It was noticed that each patient-specific reconstructive implant required a different set of manufacturing parameters. This was ascertained by manufacturing a porous PEEK patient-specific orbital implant. We evaluated the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the design variants, biomechanical, and morphological parameters. We then studied the performance of the implants as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predicted the high durability of the implants. In all the implant profile configurations, the maximum deformation values were under one-tenth of a millimeter (mm) domain. The circular patterned design variant implant revealed the best performance score. The study further demonstrated that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor. In the framework of the current thesis, the potential clinical application of material extrusion-based 3D printing for PEEK customized implants at the POC was demonstrated. We implemented clinical experience and engineering principles to generate a technical roadmap from preoperative medical imaging datasets to virtual surgical planning, computer-aided design models of various reconstructive implant variants, to the fabrication of PEEK PSIs using FFF 3D printing technology. The integration of 3D printing PEEK implants at the POC entails numerous benefits, including a collaborative team approach, quicker turnaround time of customized implants, support in pre-surgical and intraoperative planning, improved patient outcomes, and decreased overall healthcare cost. We believe that FFF 3D printing of customized PEEK implants could become an integral part of the hospitals and holds potential for various reconstructive surgery applications

A Review of Virtual Reality Based Training Simulators for Orthopaedic Surgery

This review presents current virtual reality based training simulators for hip, knee and other orthopaedic surgery, including elective and trauma surgical procedures. There have not been any reviews focussing on hip and knee orthopaedic simulators. A comparison of existing simulator features is provided to identify what is missing and what is required to improve upon current simulators. In total 11 total hip replacement pre-operative planning tools were analysed, plus 9 hip trauma fracture training simulators. Additionally 9 knee arthroscopy simulators and 8 other orthopaedic simulators were included for comparison. The findings are that for orthopaedic surgery simulators in general, there is increasing use of patient-specific virtual models which reduce the learning curve. Modelling is also being used for patient-specific implant design and manufacture. Simulators are being increasingly validated for assessment as well as training. There are very few training simulators available for hip replacement, yet more advanced virtual reality is being used for other procedures such as hip trauma and drilling. Training simulators for hip replacement and orthopaedic surgery in general lag behind other surgical procedures for which virtual reality has become more common. Further developments are required to bring hip replacement training simulation up to date with other procedures. This suggests there is a gap in the market for a new high fidelity hip replacement and resurfacing training simulator

RAFS: A computer-assisted robotic system for minimally invasive joint fracture surgery, based on pre- and intra-operative imaging

The integration of minimally invasive robotic assistance and image-guidance can have positive impact on joint fracture surgery, providing a better clinical outcome with respect to the current open procedure. In this paper, a new design of the RAFS surgical system is presented. The redesign of the robotic system and its integration with a novel 3D navigation system through a new clinical workflow, overcomes the drawbacks of the earlier prototype. This makes the RAFS surgical system more suitable to clinical scenarios in the operating theatre. System accuracy and effectiveness are successfully demonstrated through laboratory trials and preliminary cadaveric trials. The experimental results demonstrate that the system allows the surgeon to reduce a 2-fragment distal femur fracture in a cadaveric specimen, with a reduction accuracy of up to 0.85 mm and 2.2°. Preliminary cadaveric trials also provided a positive and favorable outcome pointing to the usability and safety of the RAFS system in the operating theatre, potentially enhancing the capacity of joint fracture surgeries