SALSA: A Formal Hierarchical Optimization Framework for Smart Grid

The smart grid, by the integration of advanced control and optimization technologies, provides the traditional grid with an indisputable opportunity to deliver and utilize the electricity more efficiently. Building smart grid applications is a challenging task, which requires a formal modeling, integration, and validation framework for various smart grid domains. The design flow of such applications must adapt to the grid requirements and ensure the security of supply and demand. This dissertation, by proposing a formal framework for customers and operations domains in the smart grid, aims at delivering a smooth way for: i) formalizing their interactions and functionalities, ii) upgrading their components independently, and iii) evaluating their performance quantitatively and qualitatively.The framework follows an event-driven demand response program taking no historical data and forecasting service into account. A scalable neighborhood of prosumers (inside the customers domain), which are equipped with smart appliances, photovoltaics, and battery energy storage systems, are considered. They individually schedule their appliances and sell/purchase their surplus/demand to/from the grid with the purposes of maximizing their comfort and profit at each instant of time. To orchestrate such trade relations, a bilateral multi-issue negotiation approach between a virtual power plant (on behalf of prosumers) and an aggregator (inside the operations domain) in a non-cooperative environment is employed. The aggregator, with the objectives of maximizing its profit and minimizing the grid purchase, intends to match prosumers' supply with demand. As a result, this framework particularly addresses the challenges of: i) scalable and hierarchical load demand scheduling, and ii) the match between the large penetration of renewable energy sources being produced and consumed. It is comprised of two generic multi-objective mixed integer nonlinear programming models for prosumers and the aggregator. These models support different scheduling mechanisms and electricity consumption threshold policies.The effectiveness of the framework is evaluated through various case studies based on economic and environmental assessment metrics. An interactive web service for the framework has also been developed and demonstrated

Modeling and optimization of spinning conditions for polyethersulfone hollow fiber membrance fabrication using non-dominated sorting genetic algorithm-II

Optimization of spinning conditions plays a key role in the development of high performance asymmetric hollow fiber membranes. However, from previous studies, in solving these spinning condition optimization problems, they were handled mostly by using an experimentation that varied one of the independent spinning conditions and fixed the others. The common problem is the preparation of hollow fiber membranes that cannot be performed effectively due to inappropriate settings of the spinning conditions. Moreover, complexities in the spinning process have increased where the interaction effects between the spinning conditions with the presence of multiple objectives also affect the optimal spinning conditions. This is one of the main reasons why very little work has been carried out to vary spinning conditions simultaneously. Hence, in order to address these issues, this study focused on a non-dominated sorting genetic algorithm-II (NSGA-II) methodology to optimize the spinning conditions during the fabrication of polyethersulfone (PES) ultrafiltration hollow fiber membranes for oily wastewater treatment to maximize flux and rejection. Spinning conditions that were investigated were dope extrusion rate (DER), air gap length (AGL), coagulation bath temperature (CBT), bore fluid ratio (BFR), and post-treatment time (PT). First, the work was focused on predicting the performance of hollow fiber membranes by considering the design of experiments (DOE) and statistical regression technique as an important approach for modeling flux and rejection. In terms of experiments, a response surface methodology (RSM) and a central composite design (CCD) were used, whereby the factorial part was a fractional factorial design with resolution V and overall, it consisted of a combination of high levels and low levels, center points, as well as axial points. Furthermore, the regression models were generated by employing the Design Expert 6.0.5 software and they were found to be significant and valid. Then, the regression models obtained were proposed as the objective functions of NSGA-II to determine the optimal spinning conditions. The MATLAB software was used to code and execute the NSGA-II. With that, a non-dominated solution set was obtained and reported. It was discovered that the optimal spinning conditions occurred at a DER of 2.20 cm3/min, AGL of 0 cm, CBT of 30 °C, BFR (NMP/H2O) of 0/100 wt.%, and PT of 6 hour. In addition, the membrane morphology under the influence of different spinning conditions was investigated via a scanning electron microscope (SEM). The proposed optimization method based on NSGA-II offered an effective way to attain simple but robust solutions, thus providing an efficient production of PES ultrafiltration hollow fiber membranes to be used in oily wastewater treatment. Therefore, the optimization results contributed by NSGA-II can assist engineers and researchers to make better spinning optimization decisions for the membrane fabrication process

XXIII Congreso Argentino de Ciencias de la Computación - CACIC 2017 : Libro de actas

Trabajos presentados en el XXIII Congreso Argentino de Ciencias de la Computación (CACIC), celebrado en la ciudad de La Plata los días 9 al 13 de octubre de 2017, organizado por la Red de Universidades con Carreras en Informática (RedUNCI) y la Facultad de Informática de la Universidad Nacional de La Plata (UNLP).Red de Universidades con Carreras en Informática (RedUNCI

13th International Conference on Modeling, Optimization and Simulation - MOSIM 2020

Comité d’organisation: Université Internationale d’Agadir – Agadir (Maroc) Laboratoire Conception Fabrication Commande – Metz (France)Session RS-1 “Simulation et Optimisation” / “Simulation and Optimization” Session RS-2 “Planification des Besoins Matières Pilotée par la Demande” / ”Demand-Driven Material Requirements Planning” Session RS-3 “Ingénierie de Systèmes Basées sur les Modèles” / “Model-Based System Engineering” Session RS-4 “Recherche Opérationnelle en Gestion de Production” / "Operations Research in Production Management" Session RS-5 "Planification des Matières et des Ressources / Planification de la Production” / “Material and Resource Planning / Production Planning" Session RS-6 “Maintenance Industrielle” / “Industrial Maintenance” Session RS-7 "Etudes de Cas Industriels” / “Industrial Case Studies" Session RS-8 "Données de Masse / Analyse de Données” / “Big Data / Data Analytics" Session RS-9 "Gestion des Systèmes de Transport” / “Transportation System Management" Session RS-10 "Economie Circulaire / Développement Durable" / "Circular Economie / Sustainable Development" Session RS-11 "Conception et Gestion des Chaînes Logistiques” / “Supply Chain Design and Management" Session SP-1 “Intelligence Artificielle & Analyse de Données pour la Production 4.0” / “Artificial Intelligence & Data Analytics in Manufacturing 4.0” Session SP-2 “Gestion des Risques en Logistique” / “Risk Management in Logistics” Session SP-3 “Gestion des Risques et Evaluation de Performance” / “Risk Management and Performance Assessment” Session SP-4 "Indicateurs Clés de Performance 4.0 et Dynamique de Prise de Décision” / ”4.0 Key Performance Indicators and Decision-Making Dynamics" Session SP-5 "Logistique Maritime” / “Marine Logistics" Session SP-6 “Territoire et Logistique : Un Système Complexe” / “Territory and Logistics: A Complex System” Session SP-7 "Nouvelles Avancées et Applications de la Logique Floue en Production Durable et en Logistique” / “Recent Advances and Fuzzy-Logic Applications in Sustainable Manufacturing and Logistics" Session SP-8 “Gestion des Soins de Santé” / ”Health Care Management” Session SP-9 “Ingénierie Organisationnelle et Gestion de la Continuité de Service des Systèmes de Santé dans l’Ere de la Transformation Numérique de la Société” / “Organizational Engineering and Management of Business Continuity of Healthcare Systems in the Era of Numerical Society Transformation” Session SP-10 “Planification et Commande de la Production pour l’Industrie 4.0” / “Production Planning and Control for Industry 4.0” Session SP-11 “Optimisation des Systèmes de Production dans le Contexte 4.0 Utilisant l’Amélioration Continue” / “Production System Optimization in 4.0 Context Using Continuous Improvement” Session SP-12 “Défis pour la Conception des Systèmes de Production Cyber-Physiques” / “Challenges for the Design of Cyber Physical Production Systems” Session SP-13 “Production Avisée et Développement Durable” / “Smart Manufacturing and Sustainable Development” Session SP-14 “L’Humain dans l’Usine du Futur” / “Human in the Factory of the Future” Session SP-15 “Ordonnancement et Prévision de Chaînes Logistiques Résilientes” / “Scheduling and Forecasting for Resilient Supply Chains

XXIII Edición del Workshop de Investigadores en Ciencias de la Computación : Libro de actas

Compilación de las ponencias presentadas en el XXIII Workshop de Investigadores en Ciencias de la Computación (WICC), llevado a cabo en Chilecito (La Rioja) en abril de 2021.Red de Universidades con Carreras en Informátic

XX Workshop de Investigadores en Ciencias de la Computación - WICC 2018 : Libro de actas

Actas del XX Workshop de Investigadores en Ciencias de la Computación (WICC 2018), realizado en Facultad de Ciencias Exactas y Naturales y Agrimensura de la Universidad Nacional del Nordeste, los dìas 26 y 27 de abril de 2018.Red de Universidades con Carreras en Informática (RedUNCI

XX Workshop de Investigadores en Ciencias de la Computación - WICC 2018 : Libro de actas

Actas del XX Workshop de Investigadores en Ciencias de la Computación (WICC 2018), realizado en Facultad de Ciencias Exactas y Naturales y Agrimensura de la Universidad Nacional del Nordeste, los dìas 26 y 27 de abril de 2018.Red de Universidades con Carreras en Informática (RedUNCI