A Multi-objective Perspective for Operator Scheduling using Fine-grained DVS Architecture

The stringent power budget of fine grained power managed digital integrated circuits have driven chip designers to optimize power at the cost of area and delay, which were the traditional cost criteria for circuit optimization. The emerging scenario motivates us to revisit the classical operator scheduling problem under the availability of DVFS enabled functional units that can trade-off cycles with power. We study the design space defined due to this trade-off and present a branch-and-bound(B/B) algorithm to explore this state space and report the pareto-optimal front with respect to area and power. The scheduling also aims at maximum resource sharing and is able to attain sufficient area and power gains for complex benchmarks when timing constraints are relaxed by sufficient amount. Experimental results show that the algorithm that operates without any user constraint(area/power) is able to solve the problem for most available benchmarks, and the use of power budget or area budget constraints leads to significant performance gain.Comment: 18 pages, 6 figures, International journal of VLSI design & Communication Systems (VLSICS

Power and memory optimization techniques in embedded systems design

Embedded systems incur tight constraints on power consumption and memory (which impacts size) in addition to other constraints such as weight and cost. This dissertation addresses two key factors in embedded system design, namely minimization of power consumption and memory requirement. The first part of this dissertation considers the problem of optimizing power consumption (peak power as well as average power) in high-level synthesis (HLS). The second part deals with memory usage optimization mainly targeting a restricted class of computations expressed as loops accessing large data arrays that arises in scientific computing such as the coupled cluster and configuration interaction methods in quantum chemistry. First, a mixed-integer linear programming (MILP) formulation is presented for the scheduling problem in HLS using multiple supply-voltages in order to optimize peak power as well as average power and energy consumptions. For large designs, the MILP formulation may not be suitable; therefore, a two-phase iterative linear programming formulation and a power-resource-saving heuristic are presented to solve this problem. In addition, a new heuristic that uses an adaptation of the well-known force-directed scheduling heuristic is presented for the same problem. Next, this work considers the problem of module selection simultaneously with scheduling for minimizing peak and average power consumption. Then, the problem of power consumption (peak and average) in synchronous sequential designs is addressed. A solution integrating basic retiming and multiple-voltage scheduling (MVS) is proposed and evaluated. A two-stage algorithm namely power-oriented retiming followed by a MVS technique for peak and/or average power optimization is presented. Memory optimization is addressed next. Dynamic memory usage optimization during the evaluation of a special class of interdependent large data arrays is considered. Finally, this dissertation develops a novel integer-linear programming (ILP) formulation for static memory optimization using the well-known fusion technique by encoding of legality rules for loop fusion of a special class of loops using logical constraints over binary decision variables and a highly effective approximation of memory usage

Design synthesis for dynamically reconfigurable logic systems

Dynamic reconfiguration of logic circuits has been a research problem for over four decades. While applications using logic reconfiguration in practical scenarios have been demonstrated, the design of these systems has proved to be a difficult process demanding the skills of an experienced reconfigurable logic design expert. This thesis proposes an automatic synthesis method which relieves designers of some of the difficulties associated with designing partially dynamically reconfigurable systems. A new design abstraction model for reconfigurable systems is proposed in order to support design exploration using the presented method. Given an input behavioural model, a technology server and a set of design constraints, the method will generate a reconfigurable design solution in the form of a 3D floorplan and a configuration schedule. The approach makes use of genetic algorithms. It facilitates global optimisation to accommodate multiple design objectives common in reconfigurable system design, while making realistic estimates of configuration overheads and of the potential for resource sharing between configurations. A set of custom evolutionary operators has been developed to cope with a multiple-objective search space. Furthermore, the application of a simulation technique verifying the lll results of such an automatic exploration is outlined in the thesis. The qualities of the proposed method are evaluated using a set of benchmark designs taking data from a real reconfigurable logic technology. Finally, some extensions to the proposed method and possible research directions are discussed

Soft Error Analysis and Mitigation at High Abstraction Levels

Radiation-induced soft errors, as one of the major reliability challenges in future technology nodes, have to be carefully taken into consideration in the design space exploration. This thesis presents several novel and efficient techniques for soft error evaluation and mitigation at high abstract levels, i.e. from register transfer level up to behavioral algorithmic level. The effectiveness of proposed techniques is demonstrated with extensive synthesis experiments

A Methodology to Design Pipelined Simulated Annealing Kernel Accelerators on Space-Borne Field-Programmable Gate Arrays

Increased levels of science objectives expected from spacecraft systems necessitate the ability to carry out fast on-board autonomous mission planning and scheduling. Heterogeneous radiation-hardened Field Programmable Gate Arrays (FPGAs) with embedded multiplier and memory modules are well suited to support the acceleration of scheduling algorithms. A methodology to design circuits specifically to accelerate Simulated Annealing Kernels (SAKs) in event scheduling algorithms is shown. The main contribution of this thesis is the low complexity scoring calculation used for the heuristic mapping algorithm used to balance resource allocation across a coarse-grained pipelined data-path. The methodology was exercised over various kernels with different cost functions and problem sizes. These test cases were benchedmarked for execution time, resource usage, power, and energy on a Xilinx Virtex 4 LX QR 200 FPGA and a BAE RAD 750 microprocessor

Optimal Global Instruction Scheduling for the Itanium® Processor Architecture

On the Itanium 2 processor, effective global instruction scheduling is crucial to high performance. At the same time, it poses a challenge to the compiler: This code generation subtask involves strongly interdependent decisions and complex trade-offs that are difficult to cope with for heuristics. We tackle this NP-complete problem with integer linear programming (ILP), a search-based method that yields provably optimal results. This promises faster code as well as insights into the potential of the architecture. Our ILP model comprises global code motion with compensation copies, predication, and Itanium-specific features like control/data speculation. In integer linear programming, well-structured models are the key to acceptable solution times. The feasible solutions of an ILP are represented by integer points inside a polytope. If all vertices of this polytope are integral, then the ILP can be solved in polynomial time. We define two subproblems of global scheduling in which some constraint classes are omitted and show that the corresponding two subpolytopes of our ILP model are integral and polynomial sized. This substantiates that the found model is of high efficiency, which is also confirmed by the reasonable solution times. The ILP formulation is extended by further transformations like cyclic code motion, which moves instructions upwards out of a loop, circularly in the opposite direction of the loop backedges. Since the architecture requires instructions to be encoded in fixed-sized bundles of three, a bundler is developed that computes bundle sequences of minimal size by means of precomputed results and dynamic programming. Experiments have been conducted with a postpass tool that implements the ILP scheduler. It parses assembly procedures generated by Intel�s Itanium compiler and reschedules them as a whole. Using this tool, we optimize a selection of hot functions from the SPECint 2000 benchmark. The results show a significant speedup over the original code.Globale Instruktionsanordnung hat beim Itanium-2-Prozessor großen Einfluß auf die Leistung und stellt dabei gleichzeitig eine Herausforderung für den Compiler dar: Sie ist mit zahlreichen komplexen, wechselseitig voneinander abhängigen Entscheidungen verbunden, die für Heuristiken nur schwer zu beherrschen sind.Wir lösen diesesNP-vollständige Problem mit ganzzahliger linearer Programmierung (ILP), einer suchbasierten Methode mit beweisbar optimalen Ergebnissen. Das ermöglicht neben schnellerem Code auch Einblicke in das Potential der Itanium- Prozessorarchitektur. Unser ILP-Modell umfaßt globale Codeverschiebungen mit Kompensationscode, Prädikation und Itanium-spezifische Techniken wie Kontroll- und Datenspekulation. Bei ganzzahliger linearer Programmierung sind wohlstrukturierte Modelle der Schlüssel zu akzeptablen Lösungszeiten. Die zulässigen Lösungen eines ILPs werden durch ganzzahlige Punkte innerhalb eines Polytops repräsentiert. Sind die Eckpunkte dieses Polytops ganzzahlig, kann das ILP in Polynomialzeit gelöst werden. Wir definieren zwei Teilprobleme globaler Instruktionsanordnung durch Auslassung bestimmter Klassen von Nebenbedingungen und beweisen, daß die korrespondierenden Teilpolytope unseres ILP-Modells ganzzahlig und von polynomieller Größe sind. Dies untermauert die hohe Effizienz des gefundenen Modells, die auch durch moderate Lösungszeiten bestätigt wird. Das ILP-Modell wird um weitere Transformationen wie zyklische Codeverschiebung erweitert; letztere bezeichnet das Verschieben von Befehlen aufwärts aus einer Schleife heraus, in Gegenrichtung ihrer Rückwärtskanten. Da die Architektur eine Kodierung der Befehle in Dreierbündeln fester Größe vorschreibt, wird ein Bundler entwickelt, der Bündelsequenzen minimaler Länge mit Hilfe vorberechneter Teilergebnisse und dynamischer Programmierung erzeugt. Für die Experimente wurde ein Postpassoptimierer erstellt. Er liest von Intels Itanium-Compiler erzeugte Assemblerroutinen ein und ordnet die enthaltenen Instruktionen mit Hilfe der ILP-Methode neu an. Angewandt auf eine Auswahl von Funktionen aus dem Benchmark SPECint 2000 erreicht der Optimierer eine signifikante Beschleunigung gegenüber dem Originalcode