226 research outputs found
Independent component analysis applications in CDMA systems
Thesis (Master)--Izmir Institute of Technology, Electronics and Communication Engineering, Izmir, 2004Includes bibliographical references (leaves: 56)Text in English; Abstract: Turkish and Englishxi, 96 leavesBlind source separation (BSS) methods, independent component analysis (ICA) and independent factor analysis (IFA) are used for detecting the signal coming to a mobile user which is subject to multiple access interference in a CDMA downlink communication. When CDMA models are studied for different channel characteristics, it is seen that they are similar with BSS/ICA models. It is also showed that if ICA is applied to these CDMA models, desired user.s signal can be estimated successfully without channel information and other users. code sequences. ICA detector is compared with matched filter detector and other conventional detectors using simulation results and it is seen that ICA has some advantages over the other methods.The other BSS method, IFA is applied to basic CDMA downlink model. Since IFA has some convergence and speed problems when the number of sources is large, firstly basic CDMA model with ideal channel assumption is used in IFA application.With simulation of ideal CDMA channel, IFA is compared with ICA and matched filter.Furthermore, Pearson System-based ICA (PS-ICA) method is used forestimating non-Gaussian multipath fading channel coefficients. Considering some fading channel measurements showing that the fading channel coefficients may have an impulsive nature, these coefficients are modeled with an -stable distribution whose shape parameter takes values close to 2 which makes the distributions slightly impulsive. Simulation results are obtained to compare PS-ICA with classical ICA.Also IFA is applied to the single path CDMA downlink model to estimate fading channel by using the advantage of IFA which is the capability to estimate sources with wide class of distributions
Multiuser detection in CDMA using blind techniques
Thesis (Master)--Izmir Institute of Technology, Electronics and Communication Engineering, Izmir, 2004Includes bibliographical references (leaves: 63-65)Text in English; Abstract: Turkish and Englishxiv, 69 leavesIn code division multiple access (CDMA) systems, blind multiuser detection (MUD) techniques are of great importance, especially for downlinks, since in practice, it may be unrealistic for a mobile user to know the spreading codes of other active users in the channel. Furthermore, blind methods remove the need for training sequences which leads to a gain in the channel bandwidth. Subspace concept in blind MUD is an alternative process to classical and batch blind MUD techniques based on principle component analysis, or independent component analysis (ICA) and ICA-like algorithms, such as joint approximate diagonalization of eigen-matrices (JADE), blind source separation algorithm with reference system, etc. Briefly, the desired signal is searched in the signal subspace instead of the whole space, in this type of detectors. A variation of the subspace-based MUD is reduced-rank MUD in which a smaller subspace of the signal subspace is tracked where the desired signal is contained in. This latter method leads to a performance gain compared to a standard subspace method. In this thesis, blind signal subspace and reduced-rank MUD techniques are investigated, and applied to minimum mean square error (MMSE) detectors with two different iterative subspace tracking algorithms. The performances of these detectors are compared in different scenarios for additive white Gaussian noise and for multipath fading channels as well. With simulation results the superiority of the reduced-rank detector to the signal subspace detector is shown. Additionally, as a new remark for both detectors, it is shown that, using minimum description length criterion in subspace tracking algorithm results in an increase in rank-tracking ability and correspondingly in the final performance. Finally, the performances of these two detectors are compared with MMSE, adaptive MMSE and JADE detectors
Wideband mobile propagation channels: Modelling measurements and characterisation for microcellular environments
EThOS - Electronic Theses Online ServiceGBUnited Kingdo
A unified approach to sparse signal processing
A unified view of the area of sparse signal processing is presented in tutorial form by bringing together various fields in which the property of sparsity has been successfully exploited. For each of these fields, various algorithms and techniques, which have been developed to leverage sparsity, are described succinctly. The common potential benefits of significant reduction in sampling rate and processing manipulations through sparse signal processing are revealed. The key application domains of sparse signal processing are sampling, coding, spectral estimation, array processing, compo-nent analysis, and multipath channel estimation. In terms of the sampling process and reconstruction algorithms, linkages are made with random sampling, compressed sensing and rate of innovation. The redundancy introduced by channel coding i
Hybrid solutions to instantaneous MIMO blind separation and decoding: narrowband, QAM and square cases
Future wireless communication systems are desired to support high data rates and high quality transmission when considering the growing multimedia applications. Increasing the channel throughput leads to the multiple input and multiple output and blind equalization techniques in recent years. Thereby blind MIMO equalization has attracted a great interest.Both system performance and computational complexities play important roles in real time communications. Reducing the computational load and providing accurate performances are the main challenges in present systems. In this thesis, a hybrid method which can provide an affordable complexity with good performance for Blind Equalization in large constellation MIMO systems is proposed first. Saving computational cost happens both in the signal sep- aration part and in signal detection part. First, based on Quadrature amplitude modulation signal characteristics, an efficient and simple nonlinear function for the Independent Compo- nent Analysis is introduced. Second, using the idea of the sphere decoding, we choose the soft information of channels in a sphere, and overcome the so- called curse of dimensionality of the Expectation Maximization (EM) algorithm and enhance the final results simultaneously. Mathematically, we demonstrate in the digital communication cases, the EM algorithm shows Newton -like convergence.Despite the widespread use of forward -error coding (FEC), most multiple input multiple output (MIMO) blind channel estimation techniques ignore its presence, and instead make the sim- plifying assumption that the transmitted symbols are uncoded. However, FEC induces code structure in the transmitted sequence that can be exploited to improve blind MIMO channel estimates. In final part of this work, we exploit the iterative channel estimation and decoding performance for blind MIMO equalization. Experiments show the improvements achievable by exploiting the existence of coding structures and that it can access the performance of a BCJR equalizer with perfect channel information in a reasonable SNR range. All results are confirmed experimentally for the example of blind equalization in block fading MIMO systems
Multi-carrier CDMA using convolutional coding and interference cancellation
SIGLEAvailable from British Library Document Supply Centre-DSC:DXN016251 / BLDSC - British Library Document Supply CentreGBUnited Kingdo
Ultra Wideband Communications: from Analog to Digital
ï»żUltrabreitband-Signale (Ultra Wideband [UWB]) können einen
signifikanten Nutzen im Bereich drahtloser Kommunikationssysteme haben. Es
sind jedoch noch einige Probleme offen, die durch Systemdesigner und
Wissenschaftler gelöst werden mĂŒssen. Ein Funknetzsystem mit einer derart
groĂen Bandbreite ist normalerweise auch durch eine groĂe Anzahl an
Mehrwegekomponenten mit jeweils verschiedenen Pfadamplituden
gekennzeichnet. Daher ist es schwierig, die zeitlich verteilte Energie
effektiv zu erfassen. AuĂerdem ist in vielen FĂ€llen der naheliegende
Ansatz, ein kohÀrenter EmpfÀnger im Sinne eines signalangepassten Filters
oder eines Korrelators, nicht unbedingt die beste Wahl. In der vorliegenden
Arbeit wird dabei auf die bestehende Problematik und weitere
Lösungsmöglichkeiten eingegangen.
Im ersten Abschnitt geht es um âImpulse Radio UWBâ-Systeme mit
niedriger Datenrate. Bei diesen Systemen kommt ein inkohÀrenter EmpfÀnger
zum Einsatz. InkohÀrente Signaldetektion stellt insofern einen
vielversprechenden Ansatz dar, als das damit aufwandsgĂŒnstige und robuste
Implementierungen möglich sind. Dies trifft vor allem in AnwendungsfÀllen
wie den von drahtlosen Sensornetzen zu, wo preiswerte GerÀte mit langer
Batterielaufzeit nötigsind. Dies verringert den fĂŒr die KanalschĂ€tzung
und die Synchronisation nötigen Aufwand, was jedoch auf Kosten der
Leistungseffizienz geht und eine erhöhte Störempfindlichkeit gegenĂŒber
Interferenz (z.B. Interferenz durch mehrere Nutzer oder schmalbandige
Interferenz) zur Folge hat.
Um die Bitfehlerrate der oben genannten Verfahren zu bestimmen, wurde
zunÀchst ein inkohÀrenter Combining-Verlust spezifiziert, welcher
auftritt im Gegensatz zu kohÀrenter Detektion mit Maximum Ratio Multipath
Combining. Dieser Verlust hÀngt von dem Produkt aus der LÀnge des
Integrationsfensters und der Signalbandbreite ab.
Um den Verlust durch inkohÀrentes Combining zu reduzieren und somit die
Leistungseffizienz des EmpfÀngers zu steigern, werden verbesserte
Combining-Methoden fĂŒr Mehrwegeempfang vorgeschlagen. Ein analoger
EmpfÀnger, bei dem der Hauptteil des Mehrwege-Combinings durch einen
âIntegrate and Dumpâ-Filter implementiert ist, wird fĂŒr UWB-Systeme
mit Zeit-Hopping gezeigt. Dabei wurde die Einsatzmöglichkeit von dĂŒnn
besetzten Codes in solchen System diskutiert und bewertet. Des Weiteren
wird eine Regel fĂŒr die Code-Auswahl vorgestellt, welche die StabilitĂ€t
des Systems gegen Mehrnutzer-Störungen sicherstellt und gleichzeitig den
Verlust durch inkohÀrentes Combining verringert.
Danach liegt der Fokus auf digitalen Lösungen bei inkohÀrenter
Demodulation. Im Vergleich zum AnalogempfÀnger besitzt ein
DigitalempfÀnger einen Analog-Digital-Wandler im Zeitbereich gefolgt von
einem digitalen Optimalfilter. Der digitale Optimalfilter dekodiert den
Mehrfachzugriffscode kohÀrent und beschrÀnkt das inkohÀrente Combining
auf die empfangenen Mehrwegekomponenten im Digitalbereich. Es kommt ein
schneller Analog-Digital-Wandler mit geringer Auflösung zum Einsatz, um
einen vertretbaren Energieverbrauch zu gewÀhrleisten. Diese Digitaltechnik
macht den Einsatz langer Analogverzögerungen bei differentieller
Demodulation unnötig und ermöglicht viele Arten der digitalen
Signalverarbeitung. Im Vergleich zur Analogtechnik reduziert sie nicht nur
den inkohÀrenten Combining-Verlust, sonder zeigt auch eine stÀrkere
Resistenz gegenĂŒber Störungen. Dabei werden die Auswirkungen der
Auflösung und der Abtastrate der Analog-Digital-Umsetzung analysiert. Die
Resultate zeigen, dass die verminderte Effizienz solcher
Analog-Digital-Wandler gering ausfÀllt. Weiterhin zeigt sich, dass im
Falle starker Mehrnutzerinterferenz sogar eine Verbesserung der Ergebnisse
zu beobachten ist. Die vorgeschlagenen Design-Regeln spezifizieren die
Anwendung der Analog-Digital-Wandler und die Auswahl der Systemparameter in
AbhÀngigkeit der verwendeten Mehrfachzugriffscodes und der Modulationsart.
Wir zeigen, wie unter Anwendung erweiterter Modulationsverfahren die
Leistungseffizienz verbessert werden kann und schlagen ein Verfahren zur
UnterdrĂŒckung schmalbandiger Störer vor, welches auf Soft Limiting
aufbaut. Durch die Untersuchungen und Ergebnissen zeigt sich, dass
inkohÀrente EmpfÀnger in UWB-Kommunikationssystemen mit niedriger
Datenrate ein groĂes Potential aufweisen.
AuĂerdem wird die Auswahl der benutzbaren Bandbreite untersucht, um einen
Kompromiss zwischen inkohÀrentem Combining-Verlust und StabilitÀt
gegenĂŒber langsamen Schwund zu erreichen. Dadurch wurde ein neues Konzept
fĂŒr UWB-Systeme erarbeitet: wahlweise kohĂ€rente oder inkohĂ€rente
EmpfÀnger, welche als UWB-Systeme Frequenz-Hopping nutzen. Der wesentliche
Vorteil hiervon liegt darin, dass die Bandbreite im Basisband sich deutlich
verringert. Mithin ermöglicht dies einfach zu realisierende digitale
Signalverarbeitungstechnik mit kostengĂŒnstigen Analog-Digital-Wandlern.
Dies stellt eine neue Epoche in der Forschung im Bereich drahtloser
Sensorfunknetze dar.
Der Schwerpunkt des zweiten Abschnitts stellt adaptiven Signalverarbeitung
fĂŒr hohe Datenraten mit âDirect Sequenceâ-UWB-Systemen in den
Vordergrund. In solchen Systemen entstehen, wegen der groĂen Anzahl der
empfangenen Mehrwegekomponenten, starke Inter- bzw.
Intrasymbolinterferenzen. AuĂerdem kann die FunktionalitĂ€t des Systems
durch Mehrnutzerinterferenz und Schmalbandstörungen deutlich beeinflusst
werden. Um sie zu eliminieren, wird die âWidely Linearâ-Rangreduzierung
benutzt. Dabei verbessert die Rangreduzierungsmethode das
Konvergenzverhalten, besonders wenn der gegebene Vektor eine sehr groĂe
Anzahl an Abtastwerten beinhaltet (in Folge hoher einer Abtastrate).
ZusÀtzlich kann das System durch die Anwendung der R-linearen Verarbeitung
die Statistik zweiter Ordnung des nicht-zirkularen Signals vollstÀndig
ausnutzen, was sich in verbesserten SchÀtzergebnissen widerspiegelt.
Allgemeine kann die Methode der âWidely Linearâ-Rangreduzierung auch in
andern Bereichen angewendet werden, z.B. in âDirect
Sequenceâ-Codemultiplexverfahren (DS-CDMA), im MIMO-Bereich, im Global
System for Mobile Communications (GSM) und beim Beamforming.The aim of this thesis is to investigate key issues encountered in the
design of transmission schemes and receiving techniques for Ultra Wideband
(UWB) communication systems. Based on different data rate applications,
this work is divided into two parts, where energy efficient and robust
physical layer solutions are proposed, respectively.
Due to a huge bandwidth of UWB signals, a considerable amount of multipath
arrivals with various path gains is resolvable at the receiver. For low
data rate impulse radio UWB systems, suboptimal non-coherent detection is a
simple way to effectively capture the multipath energy. Feasible techniques
that increase the power efficiency and the interference robustness of
non-coherent detection need to be investigated. For high data rate direct
sequence UWB systems, a large number of multipath arrivals results in
severe inter-/intra-symbol interference. Additionally, the system
performance may also be deteriorated by multi-user interference and
narrowband interference. It is necessary to develop advanced signal
processing techniques at the receiver to suppress these interferences.
Part I of this thesis deals with the co-design of signaling schemes and
receiver architectures in low data rate impulse radio UWB systems based on
non-coherent detection.â We analyze the bit error rate performance of
non-coherent detection and characterize a non-coherent combining loss,
i.e., a performance penalty with respect to coherent detection with maximum
ratio multipath combining. The thorough analysis of this loss is very
helpful for the design of transmission schemes and receive techniques
innon-coherent UWB communication systems.â We propose to use optical
orthogonal codes in a time hopping impulse radio UWB system based on an
analog non-coherent receiver. The âanalogâ means that the major part of
the multipath combining is implemented by an integrate and dump filter. The
introduced semi-analytical method can help us to easily select the time
hopping codes to ensure the robustness against the multi-user interference
and meanwhile to alleviate the non-coherent combining loss.â The main
contribution of Part I is the proposal of applying fully digital solutions
in non-coherent detection. The proposed digital non-coherent receiver is
based on a time domain analog-to-digital converter, which has a high speed
but a very low resolution to maintain a reasonable power consumption.
Compared to its analog counterpart, itnot only significantly reduces the
non-coherent combining loss but also offers a higher interference
robustness. In particular, the one-bit receiver can effectively suppress
strong multi-user interference and is thus advantageous in separating
simultaneously operating piconets.The fully digital solutions overcome the
difficulty of implementing long analog delay lines and make differential
UWB detection possible. They also facilitate the development of various
digital signal processing techniques such as multi-user detection and
non-coherent multipath combining methods as well as the use of advanced
modulationschemes (e.g., M-ary Walsh modulation).â Furthermore, we
present a novel impulse radio UWB system based on frequency hopping, where
both coherent and non-coherent receivers can be adopted. The key advantage
is that the baseband bandwidth can be considerably reduced (e.g., lower
than 500 MHz), which enables low-complexity implementation of the fully
digital solutions. It opens up various research activities in the
application field of wireless sensor networks.
Part II of this thesis proposes adaptive widely linear reduced-rank
techniques to suppress interferences for high data rate direct sequence UWB
systems, where second-order non-circular signals are used. The reduced-rank
techniques are designed to improve the convergence performance and the
interference robustness especially when the received vector contains a
large number of samples (due to a high sampling rate in UWB systems). The
widely linear processing takes full advantage of the second-order
statistics of the non-circular signals and enhances the estimation
performance. The generic widely linear reduced-rank concept also has a
great potential in the applications of other systems such as Direct
Sequence Code Division Multiple Access (DS-CDMA), Multiple Input Multiple
Output (MIMO) system, and Global System for Mobile Communications (GSM), or
in other areas such as beamforming
- âŠ