1,241 research outputs found
A Proposal for a Three Detector Short-Baseline Neutrino Oscillation Program in the Fermilab Booster Neutrino Beam
A Short-Baseline Neutrino (SBN) physics program of three LAr-TPC detectors
located along the Booster Neutrino Beam (BNB) at Fermilab is presented. This
new SBN Program will deliver a rich and compelling physics opportunity,
including the ability to resolve a class of experimental anomalies in neutrino
physics and to perform the most sensitive search to date for sterile neutrinos
at the eV mass-scale through both appearance and disappearance oscillation
channels. Using data sets of 6.6e20 protons on target (P.O.T.) in the LAr1-ND
and ICARUS T600 detectors plus 13.2e20 P.O.T. in the MicroBooNE detector, we
estimate that a search for muon neutrino to electron neutrino appearance can be
performed with ~5 sigma sensitivity for the LSND allowed (99% C.L.) parameter
region. In this proposal for the SBN Program, we describe the physics analysis,
the conceptual design of the LAr1-ND detector, the design and refurbishment of
the T600 detector, the necessary infrastructure required to execute the
program, and a possible reconfiguration of the BNB target and horn system to
improve its performance for oscillation searches.Comment: 209 pages, 129 figure
Micro Fourier Transform Profilometry (FTP): 3D shape measurement at 10,000 frames per second
Recent advances in imaging sensors and digital light projection technology
have facilitated a rapid progress in 3D optical sensing, enabling 3D surfaces
of complex-shaped objects to be captured with improved resolution and accuracy.
However, due to the large number of projection patterns required for phase
recovery and disambiguation, the maximum fame rates of current 3D shape
measurement techniques are still limited to the range of hundreds of frames per
second (fps). Here, we demonstrate a new 3D dynamic imaging technique, Micro
Fourier Transform Profilometry (FTP), which can capture 3D surfaces of
transient events at up to 10,000 fps based on our newly developed high-speed
fringe projection system. Compared with existing techniques, FTP has the
prominent advantage of recovering an accurate, unambiguous, and dense 3D point
cloud with only two projected patterns. Furthermore, the phase information is
encoded within a single high-frequency fringe image, thereby allowing
motion-artifact-free reconstruction of transient events with temporal
resolution of 50 microseconds. To show FTP's broad utility, we use it to
reconstruct 3D videos of 4 transient scenes: vibrating cantilevers, rotating
fan blades, bullet fired from a toy gun, and balloon's explosion triggered by a
flying dart, which were previously difficult or even unable to be captured with
conventional approaches.Comment: This manuscript was originally submitted on 30th January 1
Construction and commissioning of a technological prototype of a high-granularity semi-digital hadronic calorimeter
A large prototype of 1.3m3 was designed and built as a demonstrator of the
semi-digital hadronic calorimeter (SDHCAL) concept proposed for the future ILC
experiments. The prototype is a sampling hadronic calorimeter of 48 units. Each
unit is built of an active layer made of 1m2 Glass Resistive Plate
Chamber(GRPC) detector placed inside a cassette whose walls are made of
stainless steel. The cassette contains also the electronics used to read out
the GRPC detector. The lateral granularity of the active layer is provided by
the electronics pick-up pads of 1cm2 each. The cassettes are inserted into a
self-supporting mechanical structure built also of stainless steel plates
which, with the cassettes walls, play the role of the absorber. The prototype
was designed to be very compact and important efforts were made to minimize the
number of services cables to optimize the efficiency of the Particle Flow
Algorithm techniques to be used in the future ILC experiments. The different
components of the SDHCAL prototype were studied individually and strict
criteria were applied for the final selection of these components. Basic
calibration procedures were performed after the prototype assembling. The
prototype is the first of a series of new-generation detectors equipped with a
power-pulsing mode intended to reduce the power consumption of this highly
granular detector. A dedicated acquisition system was developed to deal with
the output of more than 440000 electronics channels in both trigger and
triggerless modes. After its completion in 2011, the prototype was commissioned
using cosmic rays and particles beams at CERN.Comment: 49 pages, 41 figure
Belle II Technical Design Report
The Belle detector at the KEKB electron-positron collider has collected
almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an
upgrade of KEKB is under construction, to increase the luminosity by two orders
of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2
/s luminosity. To exploit the increased luminosity, an upgrade of the Belle
detector has been proposed. A new international collaboration Belle-II, is
being formed. The Technical Design Report presents physics motivation, basic
methods of the accelerator upgrade, as well as key improvements of the
detector.Comment: Edited by: Z. Dole\v{z}al and S. Un
The Imaging Magnetograph eXperiment (IMaX) for the Sunrise balloon-borne solar observatory
The Imaging Magnetograph eXperiment (IMaX) is a spectropolarimeter built by
four institutions in Spain that flew on board the Sunrise balloon-borne
telesocope in June 2009 for almost six days over the Arctic Circle. As a
polarimeter IMaX uses fast polarization modulation (based on the use of two
liquid crystal retarders), real-time image accumulation, and dual beam
polarimetry to reach polarization sensitivities of 0.1%. As a spectrograph, the
instrument uses a LiNbO3 etalon in double pass and a narrow band pre-filter to
achieve a spectral resolution of 85 mAA. IMaX uses the high Zeeman sensitive
line of Fe I at 5250.2 AA and observes all four Stokes parameters at various
points inside the spectral line. This allows vector magnetograms, Dopplergrams,
and intensity frames to be produced that, after reconstruction, reach spatial
resolutions in the 0.15-0.18 arcsec range over a 50x50 arcsec FOV. Time
cadences vary between ten and 33 seconds, although the shortest one only
includes longitudinal polarimetry. The spectral line is sampled in various ways
depending on the applied observing mode, from just two points inside the line
to 11 of them. All observing modes include one extra wavelength point in the
nearby continuum. Gauss equivalent sensitivities are four Gauss for
longitudinal fields and 80 Gauss for transverse fields per wavelength sample.
The LOS velocities are estimated with statistical errors of the order of 5-40
m/s. The design, calibration and integration phases of the instrument, together
with the implemented data reduction scheme are described in some detail.Comment: 17 figure
FPGA technology in process tomography
The aims of this paper are to provide a review of the process tomography applications employing field programmable gate arrays (FPGA) and to understand current FPGA related researches, in order to seek for the possibility to applied FPGA technology in an ultrasonic process tomography system. FPGA allows users to implement complete systems on a programmable chip, meanwhile, five main benefits of applying the FPGA technology are performance, time to market, cost, reliability, and long-term maintenance. These advantages definitely could help in the revolution of process tomography, especially for ultrasonic process tomography and electrical process tomography. Future work is focused on the ultrasonic process tomography for chemical process column investigation using FPGA for the aspects of low cost, high speed and reconstructed image quality
Studies of Forward Projection Algorithms and Implementation on PC and FPGA
This thesis first aims to understand how a part of the computed tomography (CT) algorithm called âforward projectorâ (FP) works and how it can be accelerated at a hardware level. Two methods of FP are defined and studied: pixel-driven and ray-driven. Both methods fundamentally use the property of line integral and Bresenhamâs algorithm. As the result of the study of the two FP methods, the ray-driven algorithm implemented in C++ performed 35% faster than the pixe-driven algorithm implemented in Python.This thesis implements the ray-driven forward projector algorithm using field-programmable gate array (FPGA), making use of hardware-acceleration techniques. The result shows that the FPGA implementation had a comparable speed advantage compared to the implementation on the personal computer (PC). Even though the FPGA used was outdated and budget-oriented, the chip was able to perform 58% of the performance of a more expensive, modern, and performance-oriented PC. Also, the FPGA implementation performed better in power consumption compared to the PC. Methodologies included the state machine, random access memory (RAM), and universal asynchronous receiver-transmitter (UART). By using the results in this thesis, a CT scanner can be designed to be less expensive, more efficient, faster, and use less power
- âŠ