623 research outputs found
FPGAs in Industrial Control Applications
The aim of this paper is to review the state-of-the-art of Field Programmable Gate Array (FPGA) technologies and their contribution to industrial control applications. Authors start by addressing various research fields which can exploit the advantages of FPGAs. The features of these devices are then presented, followed by their corresponding design tools. To illustrate the benefits of using FPGAs in the case of complex control applications, a sensorless motor controller has been treated. This controller is based on the Extended Kalman Filter. Its development has been made according to a dedicated design methodology, which is also discussed. The use of FPGAs to implement artificial intelligence-based industrial controllers is then briefly reviewed. The final section presents two short case studies of Neural Network control systems designs targeting FPGAs
1-Bit processing based model predictive control for fractionated satellite missions
In this thesis, a 1-bit processing based Model Predictive Control (OBMPC) structure is proposed for a fractionated satellite attitude control mission. Despite the appealing advantages of the MPC algorithm towards constrained MIMO control applications, implementing the MPC algorithm onboard a small satellite is certainly challenging due to the limited onboard resources. The proposed design is based on the 1-bit processing concept, which takes advantage of the affine relation between the 1-bit state feedback and multi-bit parameters to implement a multiplier free MPC controller. As multipliers are the major power consumer in online optimization, the OBMPC structure is proven to be more efficient in comparison to the conventional MPC implementation in term of power and circuit complexity. The system is in digital control nature, affected by quantization noise introduced by Δ∑ modulators. The stability issues and practical design criteria are also discussed in this work. Some other aspects are considered in this work to complete the control system. Firstly, the implementation of the OBMPC system relies on the 1-bit state feedbacks. Hence, 1-bit sensing components are needed to implement the OBMPC system. While the ∆∑ modulator based Microelectromechanical systems (MEMS) gyroscope is considered in this work, it is possible to implement this concept into other sensing components. Secondly, as the proposed attitude mission is based on the wireless inter-satellite link (ISL), a state estimator is required. However, conventional state estimators will once again introduce multi-bit signals, and compromise the simple, direct implementation of the OBMPC controller. Therefore, the 1-bit state estimator is also designed in this work to satisfy the requirements of the proposed fractionated attitude control mission. The simulation for the OBMPC is based on a 2U CubeSat model in a fractionated satellite structure, in which the payload and actuators are separated from the controller and controlled via the ISL. Matlab simulations and FPGA implementation based performance analysis shows that the OBMPC is feasible for fractionated satellite missions and is advantageous over the conventional MPC controllers
Robust GNSS Carrier Phase-based Position and Attitude Estimation Theory and Applications
Mención Internacional en el tÃtulo de doctorNavigation information is an essential element for the functioning of robotic platforms and
intelligent transportation systems. Among the existing technologies, Global Navigation Satellite
Systems (GNSS) have established as the cornerstone for outdoor navigation, allowing for
all-weather, all-time positioning and timing at a worldwide scale. GNSS is the generic term
for referring to a constellation of satellites which transmit radio signals used primarily for
ranging information. Therefore, the successful operation and deployment of prospective
autonomous systems is subject to our capabilities to support GNSS in the provision of
robust and precise navigational estimates.
GNSS signals enable two types of ranging observations: –code pseudorange, which is a
measure of the time difference between the signal’s emission and reception at the satellite
and receiver, respectively, scaled by the speed of light; –carrier phase pseudorange, which
measures the beat of the carrier signal and the number of accumulated full carrier cycles.
While code pseudoranges provides an unambiguous measure of the distance between satellites
and receiver, with a dm-level precision when disregarding atmospheric delays and clock offsets,
carrier phase measurements present a much higher precision, at the cost of being ambiguous by
an unknown number of integer cycles, commonly denoted as ambiguities. Thus, the maximum
potential of GNSS, in terms of navigational precision, can be reach by the use of carrier phase
observations which, in turn, lead to complicated estimation problems.
This thesis deals with the estimation theory behind the provision of carrier phase-based
precise navigation for vehicles traversing scenarios with harsh signal propagation conditions.
Contributions to such a broad topic are made in three directions. First, the ultimate positioning
performance is addressed, by proposing lower bounds on the signal processing realized at the
receiver level and for the mixed real- and integer-valued problem related to carrier phase-based
positioning. Second, multi-antenna configurations are considered for the computation of a
vehicle’s orientation, introducing a new model for the joint position and attitude estimation
problems and proposing new deterministic and recursive estimators based on Lie Theory.
Finally, the framework of robust statistics is explored to propose new solutions to code- and
carrier phase-based navigation, able to deal with outlying impulsive noises.La información de navegación es un elemental fundamental para el funcionamiento de sistemas
de transporte inteligentes y plataformas robóticas. Entre las tecnologÃas existentes, los
Sistemas Globales de Navegación por Satélite (GNSS) se han consolidado como la piedra
angular para la navegación en exteriores, dando acceso a localización y sincronización temporal
a una escala global, irrespectivamente de la condición meteorológica. GNSS es el término
genérico que define una constelación de satélites que transmiten señales de radio, usadas
primordinalmente para proporcionar información de distancia. Por lo tanto, la operatibilidad y
funcionamiento de los futuros sistemas autónomos pende de nuestra capacidad para explotar
GNSS y estimar soluciones de navegación robustas y precisas.
Las señales GNSS permiten dos tipos de observaciones de alcance: –pseudorangos de
código, que miden el tiempo transcurrido entre la emisión de las señales en los satélites y su
acquisición en la tierra por parte de un receptor; –pseudorangos de fase de portadora, que
miden la fase de la onda sinusoide que portan dichas señales y el número acumulado de ciclos
completos. Los pseudorangos de código proporcionan una medida inequÃvoca de la distancia
entre los satélites y el receptor, con una precisión de decÃmetros cuando no se tienen en
cuenta los retrasos atmosféricos y los desfases del reloj. En contraposición, las observaciones
de la portadora son super precisas, alcanzando el milÃmetro de exactidud, a expensas de ser
ambiguas por un número entero y desconocido de ciclos. Por ende, el alcanzar la máxima
precisión con GNSS queda condicionado al uso de las medidas de fase de la portadora, lo
cual implica unos problemas de estimación de elevada complejidad.
Esta tesis versa sobre la teorÃa de estimación relacionada con la provisión de navegación
precisa basada en la fase de la portadora, especialmente para vehÃculos que transitan escenarios
donde las señales no se propagan fácilmente, como es el caso de las ciudades. Para ello,
primero se aborda la máxima efectividad del problema de localización, proponiendo cotas
inferiores para el procesamiento de la señal en el receptor y para el problema de estimación
mixto (es decir, cuando las incógnitas pertenecen al espacio de números reales y enteros). En
segundo lugar, se consideran las configuraciones multiantena para el cálculo de la orientación de un vehÃculo, presentando un nuevo modelo para la estimación conjunta de posición y
rumbo, y proponiendo estimadores deterministas y recursivos basados en la teorÃa de Lie. Por
último, se explora el marco de la estadÃstica robusta para proporcionar nuevas soluciones de
navegación precisa, capaces de hacer frente a los ruidos atÃpicos.Programa de Doctorado en Ciencia y TecnologÃa Informática por la Universidad Carlos III de MadridPresidente: José Manuel Molina López.- Secretario: Giorgi Gabriele.- Vocal: Fabio Dovi
- …