Graceful performance modulation for power-neutral transient computing systems

Transient computing systems do not have energy storage, and operate directly from energy harvesting. These systems are often faced with the inherent challenge of low-current or transient power supply. In this paper, we propose “power-neutral” operation, a new paradigm for such systems, whereby the instantaneous power consumption of the system must match the instantaneous harvested power. Power neutrality is achieved using a control algorithm for dynamic frequency scaling (DFS), modulating system performance gracefully in response to the incoming power. Detailed system model is used to determine design parameters for selecting the system voltage thresholds where the operating frequency will be raised or lowered, or the system will be hibernated. The proposed control algorithm for power-neutral operation is experimentally validated using a microcontroller incorporating voltage threshold-based interrupts for frequency scaling. The microcontroller is powered directly from real energy harvesters; results demonstrate that a power-neutral system sustains operation for 4–88% longer with up to 21% speedup in application execution

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions