2,863 research outputs found
RF-Powered Cognitive Radio Networks: Technical Challenges and Limitations
The increasing demand for spectral and energy efficient communication
networks has spurred a great interest in energy harvesting (EH) cognitive radio
networks (CRNs). Such a revolutionary technology represents a paradigm shift in
the development of wireless networks, as it can simultaneously enable the
efficient use of the available spectrum and the exploitation of radio frequency
(RF) energy in order to reduce the reliance on traditional energy sources. This
is mainly triggered by the recent advancements in microelectronics that puts
forward RF energy harvesting as a plausible technique in the near future. On
the other hand, it is suggested that the operation of a network relying on
harvested energy needs to be redesigned to allow the network to reliably
function in the long term. To this end, the aim of this survey paper is to
provide a comprehensive overview of the recent development and the challenges
regarding the operation of CRNs powered by RF energy. In addition, the
potential open issues that might be considered for the future research are also
discussed in this paper.Comment: 8 pages, 2 figures, 1 table, Accepted in IEEE Communications Magazin
Resource Allocation in Wireless Networks with RF Energy Harvesting and Transfer
Radio frequency (RF) energy harvesting and transfer techniques have recently
become alternative methods to power the next generation of wireless networks.
As this emerging technology enables proactive replenishment of wireless
devices, it is advantageous in supporting applications with quality-of-service
(QoS) requirement. This article focuses on the resource allocation issues in
wireless networks with RF energy harvesting capability, referred to as RF
energy harvesting networks (RF-EHNs). First, we present an overview of the
RF-EHNs, followed by a review of a variety of issues regarding resource
allocation. Then, we present a case study of designing in the receiver
operation policy, which is of paramount importance in the RF-EHNs. We focus on
QoS support and service differentiation, which have not been addressed by
previous literatures. Furthermore, we outline some open research directions.Comment: To appear in IEEE Networ
Optimization of the overall success probability of the energy harvesting cognitive wireless sensor networks
Wireless energy harvesting can improve the performance of cognitive wireless sensor networks (WSNs). This paper considers radio frequency (RF) energy harvesting from transmissions in the primary spectrum for cognitive WSNs. The overall success probability of the energy harvesting cognitive WSN depends on the transmission success probability and energy success probability. Using the tools from stochastic geometry, we show that the overall success probability can be optimized with respect to: 1) transmit power of the sensors; 2) transmit power of the primary transmitters; and 3) spatial density of the primary transmitters. In this context, an optimization algorithm is proposed to maximize the overall success probability of the WSNs. Simulation results show that the overall success probability and the throughput of the WSN can be significantly improved by optimizing the aforementioned three parameters. As RF energy harvesting can also be performed indoors, hence, our solution can be directly applied to the cognitive WSNs that are installed in smart buildings
Throughput Maximization for UAV-Aided Backscatter Communication Networks
This paper investigates unmanned aerial vehicle (UAV)-aided backscatter communication (BackCom) networks, where the UAV is leveraged to help the backscatter device (BD) forward signals to the receiver. Based on the presence or absence of a direct link between BD and receiver, two protocols, namely transmit-backscatter (TB) protocol and transmit-backscatter-relay (TBR) protocol, are proposed to utilize the UAV to assist the BD. In particular, we formulate the system throughput maximization problems for the two protocols by jointly optimizing the time allocation, reflection coefficient and UAV trajectory. Different static/dynamic circuit power consumption models for the two protocols are analyzed. The resulting optimization problems are shown to be non-convex, which are challenging to solve. We first consider the dynamic circuit power consumption model, and decompose the original problems into three sub-problems, namely time allocation optimization with fixed UAV trajectory and reflection coefficient, reflection coefficient optimization with fixed UAV trajectory and time allocation, and UAV trajectory optimization with fixed reflection coefficient and time allocation. Then, an efficient iterative algorithm is proposed for both protocols by leveraging the block coordinate descent method and successive convex approximation (SCA) techniques. In addition, for the static circuit power consumption model, we obtain the optimal time allocation with a given reflection coefficient and UAV trajectory and the optimal reflection coefficient with low computational complexity by using the Lagrangian dual method. Simulation results show that the proposed protocols are able to achieve significant throughput gains over the compared benchmarks
Coexistence of RF-powered IoT and a Primary Wireless Network with Secrecy Guard Zones
This paper studies the secrecy performance of a wireless network (primary
network) overlaid with an ambient RF energy harvesting IoT network (secondary
network). The nodes in the secondary network are assumed to be solely powered
by ambient RF energy harvested from the transmissions of the primary network.
We assume that the secondary nodes can eavesdrop on the primary transmissions
due to which the primary network uses secrecy guard zones. The primary
transmitter goes silent if any secondary receiver is detected within its guard
zone. Using tools from stochastic geometry, we derive the probability of
successful connection of the primary network as well as the probability of
secure communication. Two conditions must be jointly satisfied in order to
ensure successful connection: (i) the SINR at the primary receiver is above a
predefined threshold, and (ii) the primary transmitter is not silent. In order
to ensure secure communication, the SINR value at each of the secondary nodes
should be less than a predefined threshold. Clearly, when more secondary nodes
are deployed, more primary transmitters will remain silent for a given guard
zone radius, thus impacting the amount of energy harvested by the secondary
network. Our results concretely show the existence of an optimal deployment
density for the secondary network that maximizes the density of nodes that are
able to harvest sufficient amount of energy. Furthermore, we show the
dependence of this optimal deployment density on the guard zone radius of the
primary network. In addition, we show that the optimal guard zone radius
selected by the primary network is a function of the deployment density of the
secondary network. This interesting coupling between the two networks is
studied using tools from game theory. Overall, this work is one of the few
concrete works that symbiotically merge tools from stochastic geometry and game
theory
Efficient energy management for the internet of things in smart cities
The drastic increase in urbanization over the past few years requires sustainable, efficient, and smart solutions for transportation, governance, environment, quality of life, and so on. The Internet of Things offers many sophisticated and ubiquitous applications for smart cities. The energy demand of IoT applications is increased, while IoT devices continue to grow in both numbers and requirements. Therefore, smart city solutions must have the ability to efficiently utilize energy and handle the associated challenges. Energy management is considered as a key paradigm for the realization of complex energy systems in smart cities. In this article, we present a brief overview of energy management and challenges in smart cities. We then provide a unifying framework for energy-efficient optimization and scheduling of IoT-based smart cities. We also discuss the energy harvesting in smart cities, which is a promising solution for extending the lifetime of low-power devices and its related challenges. We detail two case studies. The first one targets energy-efficient scheduling in smart homes, and the second covers wireless power transfer for IoT devices in smart cities. Simulation results for the case studies demonstrate the tremendous impact of energy-efficient scheduling optimization and wireless power transfer on the performance of IoT in smart cities
- …