Development and evaluation of an advanced microwave radiance data assimilation system for estimating snow water storage at the continental scale

Snow cover modulates the Earth's surface energy and water fluxes, and snowmelt runoff is the principal source of water for humans and ecosystems in many of the middle to high latitudes in the Northern Hemisphere. Understanding spatial and temporal variation in snowpack is crucial for climate studies and water resource management and thus the climate and hydrological research communities have invested in improving large-scale snow estimates. This dissertation aims to develop an advanced snow radiance assimilation (RA) system to improve continental-scale snow water storage estimates. The RA system is comprised of the Community Land Model version 4 (CLM4) (for snow energy and mass balance modeling), radiative transfer models (RTMs) (for brightness temperature estimates), and the Data Assimilation Research Testbed (DART) (for ensemble-based data assimilation). Two snowpack RTMs, the Microwave Emission Model for Layered Snowpacks (MEMLS) and the Dense Media Radiative Transfer--Multi Layers model (DMRT-ML), are used to simulate T[subscript B] of a multi-layered snowpack. Through an error characterization study, this dissertation presents that the correlations between snow water equivalent (SWE) error and brightness temperature (T[subscript B]) error and subsequent RA performance in estimating snow are significantly affected by all physical properties of soil and snow involved in estimating T[subscript B]. Based on the error characterization results, it is hypothesized that the continental-scale RA performance in estimating snow water storage can be improved by simultaneously updating all model physical states and parameters determining T[subscript B] based on a rule, in which prior estimates are updated depending on their correlations with a prior T[subscript B]. The results of a series of RA experiments show that the improved continental-scale snow estimates are obtained by applying the hypothesis. This dissertation also shows that further improvement of the performance of the RA system can be achieved, especially for vegetated areas, by assimilating the best-performing frequency channels (i.e., 18.7 and 23.8 GHz) and by considering the vegetation single scattering albedo to represent the vegetation effect on T[subscript B] at the top of the atmosphere.Geological Science

Relationship between aquarius L-band active and passive multi-year observations over Australia

This PFC is focused in evaluating the feasibility of doing a combined changed algorithm to simplify the process of low resolution downscaling using high resolution.The aim of this Thesis is to further our understanding of the geophysical information that can be estimated from active and passive L-band sensors. All data was obtained from NASA's satellite Aquarius durin the period Sept. 2011- August 2014

L Band Brightness Temperature Observations over a Corn Canopy during the Entire Growth Cycle

During a field campaign covering the 2002 corn growing season, a dual polarized tower mounted L-band (1.4 GHz) radiometer (LRAD) provided brightness temperature (TB) measurements at preset intervals, incidence and azimuth angles. These radiometer measurements were supported by an extensive characterization of land surface variables including soil moisture, soil temperature, vegetation biomass, and surface roughness. In the period May 22 to August 30, ten days of radiometer and ground measurements are available for a corn canopy with a vegetation water content (W) range of 0.0 to 4.3 kg m−2. Using this data set, the effects of corn vegetation on surface emissions are investigated by means of a semi-empirical radiative transfer model. Additionally, the impact of roughness on the surface emission is quantified using TB measurements over bare soil conditions. Subsequently, the estimated roughness parameters, ground measurements and horizontally (H)-polarized TB are employed to invert the H-polarized transmissivity (γh) for the monitored corn growing season

Remote Sensing of Environmental Changes in Cold Regions

This Special Issue gathers papers reporting recent advances in the remote sensing of cold regions. It includes contributions presenting improvements in modeling microwave emissions from snow, assessment of satellite-based sea ice concentration products, satellite monitoring of ice jam and glacier lake outburst floods, satellite mapping of snow depth and soil freeze/thaw states, near-nadir interferometric imaging of surface water bodies, and remote sensing-based assessment of high arctic lake environment and vegetation recovery from wildfire disturbances in Alaska. A comprehensive review is presented to summarize the achievements, challenges, and opportunities of cold land remote sensing

The influence of winter time boreal forest tree transmissivity on tree emission and passive microwave snow observations

Forest cover significantly attenuates natural upwelling ground microwave emission from seasonal terrestrial snow. This presents a major challenge for the accurate retrieval of snow from airborne or spaceborne passive microwave (PM) observations. Forest transmissivity is a key parameter describing tree emission because not only does it influence the proportion of sub-canopy upwelling microwave emission penetrating through the forest canopy, it also controls the forest thermal emission. Hence, it is a very important parameter for correcting the influence of forests on spaceborne or airborne observations of the Earth’s land surface. Under sub-zero temperatures, vegetation water content can be frozen influencing the microwave transmissivity of trees. Yet this phenomenon has not been verified through experimentation leaving significant uncertainty in tree emission modelling and spaceborne microwave observations. Therefore, a season-long experiment was designed to study this phenomenon. Ground-based radiometer observations of tree emission, spaceborne observations of forest emission, and model simulations of canopy emission were conducted during this experiment. Based on this experiment, the influence of physical temperature on tree transmissivity was verified, and a model developed to quantitatively describe this temperature-transmissivity relationship. An evaluation of this temperature-transmissivity relationship was conducted showing that both ground-based and spaceborne observations of tree emission are significantly influenced by this phenomenon. Furthermore, passive microwave spaceborne snow retrievals in forested regions are influenced by this phenomenon. Finally, an approach to reduce the influence of the temperature-transmissivity relationship on passive microwave spaceborne snow retrievals is demonstrated

ASSIMILATION OF PASSIVE MICROWAVE BRIGHTNESS TEMPERATURES FOR SNOW WATER EQUIVALENT ESTIMATION USING THE NASA CATCHMENT LAND SURFACE MODEL AND MACHINE LEARNING ALGORITHMS IN NORTH AMERICA

Snow is a critical component in the global energy and hydrologic cycle. It is important to know the mass of snow because it serves as the dominant source of drinking water for more than one billion people worldwide. To accurately estimate the depth of snow and mass of water within a snow pack across regional or continental scales is a challenge, especially in the presence of dense vegetations since direct quantification of SWE is complicated by spatial and temporal variability. To overcome some of the limitations encountered by traditional SWE retrieval algorithms or radiative transfer-based snow emission models, this study explores the use of a well-trained support vector machine to merge an advanced land surface model within a variant of radiance emission (i.e., brightness temperature) assimilation experiments. In general, modest improvements in snow depth, and SWE predictability were witnessed as a result of the assimilation procedure over snow-covered terrain in North America when compared against available snow products as well as ground-based observations. These preliminary findings are encouraging and suggest the potential for global-scale snow estimation via the proposed assimilation procedure

Effect of snow microstructure and subnivean water bodies on microwave radiometry of seasonal snow

Remote sensing using microwave radiometry is an acknowledged method for monitoring various environmental processes in the cryosphere, atmosphere, soil, vegetation and oceans. Several decades long time series of spaceborne passive microwave observations can be used to detect trends relating to climate change, while present measurements provide information on the current state of the environment. Unlike optical wavelengths, microwaves are mostly insensitive to atmospheric and lighting conditions and are therefore suitable for monitoring seasonal snow in the Arctic. One of the major challenges in the utilization of spaceborne passive microwave observations for snow measurements is the poor spatial resolution of instruments. The interpretation of measurements over heterogeneous areas requires sophisticated microwave emission models relating the measured parameters to physical properties of snow, vegetation and the subnivean layer. Especially the high contrast in the electrical properties of soil and liquid water introduces inaccuracies in the retrieved parameters close to coastlines, lakes and wetlands, if the subnivean water bodies are not accounted for in the algorithm. The first focus point of this thesis is the modelling of brightness temperature of ice- and snow-covered water bodies and their differences from snow-covered forested and open land areas. Methods for modelling the microwave signatures of water bodies and for using that information in the retrieval of snow parameters from passive microwave measurements are presented in this thesis. The second focus point is the effect of snow microstructure on its microwave signature. Even small changes in the size of scattering particles, snow grains, modify the measured brightness temperature notably. The coupling of different modelled and measured snow microstructural parameters with a microwave snow emission model and the application of those parameters in the retrieval of snow parameters from remote sensing data are studied

Evaluation of SMAP, SMOS-IC, FY3B, JAXA, and LPRM Soil Moisture Products over the Qinghai-Tibet Plateau and Its Surrounding Areas

© 2019 by the authors. High-quality and long time-series soil moisture (SM) data are increasingly required for the Qinghai-Tibet Plateau (QTP) to more accurately and effectively assess climate change. In this study, to evaluate the accuracy and effectiveness of SM data, five passive microwave remotely sensed SM products are collected over the QTP, including those from the soil moisture active passive (SMAP), soil moisture and ocean salinity INRA-CESBIO (SMOS-IC), Fengyun-3B microwave radiation image (FY3B), and two SM products derived from the advanced microwave scanning radiometer 2 (AMSR2). The two AMSR2 products are generated by the land parameter retrieval model (LPRM) and the Japan Aerospace Exploration Agency (JAXA) algorithm, respectively. The SM products are evaluated through a two-stage data comparison method. The first stage is direct validation at the grid scale. Five SM products are compared with corresponding in situ measurements at five in situ networks, including Heihe, Naqu, Pali, Maqu, and Ngari. Another stage is indirect validation at the regional scale, where the uncertainties of the data are quantified by using a three-cornered hat (TCH) method. The results at the regional scale indicate that soil moisture is underestimated by JAXA and overestimated by LPRM, some noise is contained in temporal variations in SMOS-IC, and FY3B has relatively low absolute accuracy. The uncertainty of SMAP is the lowest among the five products over the entire QTP. In the SM map composed by five SM products with the lowest pixel-level uncertainty, 66.64% of the area is covered by SMAP (JAXA: 19.39%, FY3B: 10.83%, LPRM: 2.11%, and SMOS-IC: 1.03%). This study reveals some of the reasons for the different performances of these five SM products, mainly from the perspective of the parameterization schemes of their corresponding retrieval algorithms. Specifically, the parameterization configurations and corresponding input datasets, including the land-surface temperature, the vegetation optical depth, and the soil dielectric mixing model are analyzed and discussed. This study provides quantitative evidence to better understand the uncertainties of SM products and explain errors that originate from the retrieval algorithms

An artificial neural network approach for soil moisture retrieval using passive microwave data

Soil moisture is a key variable that defines land surface-atmosphere (boundary layer) interactions, by contributing directly to the surface energy and water balance. Soil moisture values derived from remote sensing platforms only accounts for the near surface soil layers, generally the top 5cm. Passive microwave data at L-band (1.4 GHz, 21cm wavelength) measurements are shown to be a very effective observation for surface soil moisture retrieval. The first space-borne L-band mission dedicated to observing soil moisture, the European Space Agency's (ESA) Soil Moisture and Ocean Salinity (SMOS) mission, was launched on 2nd November 2009.Artificial Neural Network (ANN) methods have been used to empirically ascertain the complex statistical relationship between soil moisture and brightness temperature in the presence of vegetation cover. The current problem faced by this method is its inability to predict soil moisture values that are 'out-of-range' of the training data.In this research, an optimization model is developed for the Backpropagation Neural Network model. This optimization model utilizes the combination of the mean and standard deviation of the soil moisture values, together with the prediction process at different pre-determined, equal size regions to cope with the spatial and temporal variation of soil moisture values. This optimized model coupled with an ANN of optimum architecture, in terms of inputs and the number of neurons in the hidden layers, is developed to predict scale-to-scale and downscaling of soil moisture values. The dependency on the accuracy of the mean and standard deviation values of soil moisture data is also studied in this research by simulating the soil moisture values using a multiple regression model. This model obtains very encouraging results for these research problems.The data used to develop and evaluate the model in this research has been obtained from the National Airborne Field Experiments in 2005