Collaborative Indoor Positioning Systems: A Systematic Review

Research and development in Collaborative Indoor Positioning Systems (CIPSs) is growing steadily due to their potential to improve on the performance of their non-collaborative counterparts. In contrast to the outdoors scenario, where Global Navigation Satellite System is widely adopted, in (collaborative) indoor positioning systems a large variety of technologies, techniques, and methods is being used. Moreover, the diversity of evaluation procedures and scenarios hinders a direct comparison. This paper presents a systematic review that gives a general view of the current CIPSs. A total of 84 works, published between 2006 and 2020, have been identified. These articles were analyzed and classified according to the described system’s architecture, infrastructure, technologies, techniques, methods, and evaluation. The results indicate a growing interest in collaborative positioning, and the trend tend to be towards the use of distributed architectures and infrastructure-less systems. Moreover, the most used technologies to determine the collaborative positioning between users are wireless communication technologies (Wi-Fi, Ultra-WideBand, and Bluetooth). The predominant collaborative positioning techniques are Received Signal Strength Indication, Fingerprinting, and Time of Arrival/Flight, and the collaborative methods are particle filters, Belief Propagation, Extended Kalman Filter, and Least Squares. Simulations are used as the main evaluation procedure. On the basis of the analysis and results, several promising future research avenues and gaps in research were identified

Loosely coupled GNSS and UWB with INS integration for indoor/outdoor pedestrian navigation

3noThe growth of location-based services (LBS) has increased rapidly in last years, mainly due to the possibility to exploit low-cost sensors installed in portable devices, such as smartphones and tablets. This work aims to show a low-cost multi-sensor platform developed by the authors in which an ultra-wideband (UWB) indoor positioning system is added to a classical global navigation satellite systems–inertial navigation system (GNSS-INS) integration, in order to acquire different synchronized data for further data fusion analysis in order to exploit seamless positioning. The data fusion is based on an extended Kalman filter (EKF) and on a geo-fencing approach which allows the navigation solution to be provided continuously. In particular, the proposed algorithm aims to solve a navigation task of a pedestrian user moving from an outdoor space to an indoor environment. The methodology and the system setup is presented with more details in the paper. The data acquired and the real-time positioning estimation are analysed in depth and compared with ground truth measurements. Particular attention is given to the UWB positioning system and its behaviour with respect to the environment. The proposed data fusion algorithm provides an overall horizontal and 3D accuracy of 35 cm and 45 cm, respectively, obtained considering 5 different measurement campaigns.openopenDi Pietra V.; Dabove P.; Piras M.Di Pietra, V.; Dabove, P.; Piras, M

Recent Advances in Indoor Localization: A Survey on Theoretical Approaches and Applications

Nowadays, the availability of the location information becomes a key factor in today’s communications systems for allowing location based services. In outdoor scenarios, the Mobile Terminal (MT) position is obtained with high accuracy thanks to the Global Positioning System (GPS) or to the standalone cellular systems. However, the main problem of GPS or cellular systems resides in the indoor environment and in scenarios with deep shadowing effect where the satellite or cellular signals are broken. In this paper, we will present a review over different technologies and concepts used to improve indoor localization. Additionally, we will discuss different applications based on different localization approaches. Finally, comprehensive challenges in terms of accuracy, cost, complexity, security, scalability, etc. are presente

Hybrid and Cooperative Positioning Solutions for Wireless Networks

In this thesis, some hybrid and cooperative solutions are proposed and analyzed to locate the user in challenged scenarios, with the aim to overcome the limits of positioning systems based on single technology. The proposed approaches add hybrid and cooperative features to some conventional position estimation techniques like Kalman filter and particle filter, and fuse information from different radio frequency technologies. The concept of cooperative positioning is enhanced with hybrid technologies, in order to further increase the positioning accuracy and availability. In particular, wireless sensor networks and radio frequency identification technology are used together to enhance the collected data with position information. Terrestrial ranging techniques (i.e., ultra-wide band technology) are employed to assist the satellite-based localization in urban canyons and indoors. Moreover, some advanced positioning algorithms, such as energy efficient, cognitive tracking and non-line-of-sight identification, are studied to satisfy the different positioning requirements in harsh indoor environments. The proposed hybrid and cooperative solutions are tested and verified by first Monte Carlo simulations then real experiments. The obtained results demonstrate that the proposed solutions can increase the robustness (positioning accuracy and availability) of the current localization system

Positioning algorithms for RFID-based multi-sensor indoor/outdoor positioning techniques

Position information has been very important. People need this information almost everywhere all the time. However, it is a challenging task to provide precise positions indoor/outdoor seamlessly. Outdoor positioning has been widely studied and accurate positions can usually be achieved by well developed GPS techniques. However, these techniques are difficult to be used indoor since GPS signals are too weak to be received. The alternative techniques, such as inertial sensors and radio-based pseudolites, can be used for indoor positioning but have limitations. For example, the inertial sensors suffer from drifting problems caused by the accumulating errors of measured acceleration and velocity and the radio-based techniques are prone to the obstructions and multipath effects of the transmitted signals. It is therefore necessary to develop improved methods for minimising the limitations of the current indoor positioning techniques and providing an adequately precise solution of the indoor positioning and seamless indoor/outdoor positioning. The main objectives of this research are to investigate and develop algorithms for the low-cost and portable indoor personal positioning system using Radio Frequency Identification (RFID) based multi-sensor techniques, such as integrating with Micro-Electro-Mechanical Systems (MEMS) Inertial Navigation System (INS) and/or GPS. A RFID probabilistic Cell of Origin (CoO) algorithm is developed, which is superior to the conventional CoO positioning algorithm in its positioning accuracy and continuity. Integration algorithms are also developed for RFID-based multi-sensor positioning techniques, which can provide metre-level positioning accuracy for dynamic personal positioning indoors. In addition, indoor/outdoor seamless positioning algorithms are investigated based on the iterated Reduced Sigma Point Kalman Filter (RSPKF) for RFID/MEMS INS/low-cost GPS integrated technique, which can provide metre-level positioning accuracy for personal positioning. 3-D GIS assisted personal positioning algorithms are also developed, including the map matching algorithm based on the probabilistic maps for personal positioning and the Site Specific (SISP) propagation model for efficiently generating the RFID signal strength distributions in location fingerprinting algorithms. Both static and dynamic indoor positioning experiments have been conducted using the RFID and RFID/MEMS INS integrated techniques. Metre-level positioning accuracy is achieved (e.g. 3.5m in rooms and 1.5m in stairways for static position, 4m for dynamic positioning and 1.7m using the GIS assisted positioning algorithms). Various indoor/outdoor experiments have been conducted using the RFID/MEMS INS/low-cost GPS integrated technique. It indicates that the techniques selected in this study, integrated with the low-cost GPS, can be used to provide continuous indoor/outdoor positions in approximately 4m accuracy with the iterated RSPKF. The results from the above experiments have demonstrated the improvements of integrating multiple sensors with RFID and utilizing the 3-D GIS data for personal positioning. The algorithms developed can be used in a portable RFID based multi-sensor positioning system to achieve metre-level accuracy in the indoor/outdoor environments. The proposed system has potential applications, such as tracking miners underground, monitoring athletes, locating first responders, guiding the disabled and providing other general location based services (LBS)

Recent Advances in Indoor Localization Systems and Technologies

Despite the enormous technical progress seen in the past few years, the maturity of indoor localization technologies has not yet reached the level of GNSS solutions. The 23 selected papers in this book present the recent advances and new developments in indoor localization systems and technologies, propose novel or improved methods with increased performance, provide insight into various aspects of quality control, and also introduce some unorthodox positioning methods

Location-Enabled IoT (LE-IoT): A Survey of Positioning Techniques, Error Sources, and Mitigation

The Internet of Things (IoT) has started to empower the future of many industrial and mass-market applications. Localization techniques are becoming key to add location context to IoT data without human perception and intervention. Meanwhile, the newly-emerged Low-Power Wide-Area Network (LPWAN) technologies have advantages such as long-range, low power consumption, low cost, massive connections, and the capability for communication in both indoor and outdoor areas. These features make LPWAN signals strong candidates for mass-market localization applications. However, there are various error sources that have limited localization performance by using such IoT signals. This paper reviews the IoT localization system through the following sequence: IoT localization system review -- localization data sources -- localization algorithms -- localization error sources and mitigation -- localization performance evaluation. Compared to the related surveys, this paper has a more comprehensive and state-of-the-art review on IoT localization methods, an original review on IoT localization error sources and mitigation, an original review on IoT localization performance evaluation, and a more comprehensive review of IoT localization applications, opportunities, and challenges. Thus, this survey provides comprehensive guidance for peers who are interested in enabling localization ability in the existing IoT systems, using IoT systems for localization, or integrating IoT signals with the existing localization sensors