Automated Netlist Generation for 3D Electrothermal and Electromagnetic Field Problems

We present a method for the automatic generation of netlists describing general three-dimensional electrothermal and electromagnetic field problems. Using a pair of structured orthogonal grids as spatial discretisation, a one-to-one correspondence between grid objects and circuit elements is obtained by employing the finite integration technique. The resulting circuit can then be solved with any standard available circuit simulator, alleviating the need for the implementation of a custom time integrator. Additionally, the approach straightforwardly allows for field-circuit coupling simulations by appropriately stamping the circuit description of lumped devices. As the computational domain in wave propagation problems must be finite, stamps representing absorbing boundary conditions are developed as well. Representative numerical examples are used to validate the approach. The results obtained by circuit simulation on the generated netlists are compared with appropriate reference solutions.Comment: This is a pre-print of an article published in the Journal of Computational Electronics. The final authenticated version is available online at: https://dx.doi.org/10.1007/s10825-019-01368-6. All numerical results can be reproduced by the Matlab code openly available at https://github.com/tc88/ANTHE

When self-consistency makes a difference

Compound semiconductor power RF and microwave device modeling requires, in many cases, the use of selfconsistent electrothermal equivalent circuits. The slow thermal dynamics and the thermal nonlinearity should be accurately included in the model; otherwise, some response features subtly related to the detailed frequency behavior of the slow thermal dynamics would be inaccurately reproduced or completely distorted. In this contribution we show two examples, concerning current collapse in HBTs and modeling of IMPs in GaN HEMTs. Accurate thermal modeling is proved to be be made compatible with circuit-oriented CAD tools through a proper choice of system-level approximations; in the discussion we exploit a Wiener approach, but of course the strategy should be tailored to the specific problem under consideratio

Temperature-dependent Characterization of Power Amplifiers Using an Efficient Electrothermal Analysis Technique

In this paper, we propose an efficient methodology for the electrothermal characterization of power amplifier (PA) integrated circuits. The proposed electrothermal analysis method predicts the effect of temperature variations on the key performances of PAs, such as gain and linearity, under realistic dynamic operating conditions. A comprehensive technique for identifying an equivalent compact thermal model, using data from 3-D finite element method thermal simulation and nonlinear curve fitting algorithms, is described. Two efficient methods for electrothermal analysis applying the developed compact thermal model are reported. The validity of the methods is evaluated using commercially available electrothermal computer-aided design (CAD) tools and through extensive pulsed RF signal measurements of a PA device under test. The measurement results confirm the validity of the proposed electrothermal analysis methods. The proposed methods show significantly faster simulation speed comparing to available CAD tools for electrothermal analysis. Moreover, the results reveal the importance of electrothermal characterization in the prediction of the temperature-aware PA dynamic operation

A new tightly-coupled transient electro-thermal simulation method for power electronics

Paper no. 224This paper presents a new transient electro-thermal (ET) simulation method for fast 3D chip-level analysis of power electronics with field solver accuracy. The metallization stacks are meshed and solved with 3D field solver using nonlinear temperature-dependent parameters, and the active devices are modeled with nonlinear tabular compact models to avoid time-consuming TCAD simulation. The main contributions include: 1) A tightly-coupled formulation that solves the electrical and thermal responses simultaneously for better convergence property; 2) Explicit account of capacitive effects, including interconnect parasitic capacitance and gate capacitance of power devices, to improve modeling accuracy in highfrequency applications; 3) A specialized transient solver based on the matrix exponential method (MEXP) to address the multi-scale problem caused by the considerably different time scales in electrical and thermal dynamics. Numerical experiments have demonstrated the advantages of the proposed co-simulation framework.postprin

Non-linear thermal simulation at system level: Compact modelling and experimental validation

In this work, a general methodology to extract compact, non-linear transient thermal models of complex thermal systems is presented and validated. The focus of the work is to show a robust method to develop compact and accurate non-linear thermal models in the general case of systems with multiple heat sources. A real example of such a system is manufactured and its thermal behaviour is analyzed by means of Infra-Red thermography measurements. A transient, non-linear Finite-Element-Method based model is therefore built and tuned on the measured thermal responses. From this model, the transient thermal responses of the system are calculated in the locations of interest. From these transient responses, non-linear compact transient thermal models are derived. These models are based on Foster network topology and they can capture the effect of thermal non-linearities present in any real thermal system, accounting for mutual interaction between different power sources. The followed methodology is described, verification of the model against measurements is performed and limitations of the approach are therefore discussed. The developed methodology shows that it is possible to capture strongly non-linear effects in multiple-heat source systems with very good accuracy, enabling fast and accurate thermal simulations in electrical solvers

Roadmap on semiconductor-cell biointerfaces.

This roadmap outlines the role semiconductor-based materials play in understanding the complex biophysical dynamics at multiple length scales, as well as the design and implementation of next-generation electronic, optoelectronic, and mechanical devices for biointerfaces. The roadmap emphasizes the advantages of semiconductor building blocks in interfacing, monitoring, and manipulating the activity of biological components, and discusses the possibility of using active semiconductor-cell interfaces for discovering new signaling processes in the biological world

Constraint-Aware, Scalable, and Efficient Algorithms for Multi-Chip Power Module Layout Optimization

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM layouts is surpassing the capability of a manual, iterative design process to produce an optimum design with agile development requirements. An electronic design automation tool called PowerSynth has been introduced with ongoing research toward enhanced capabilities to speed up the optimized MCPM layout design process. This dissertation presents the PowerSynth progression timeline with the methodology updates and corresponding critical results compared to v1.1. The first released version (v1.1) of PowerSynth demonstrated the benefits of layout abstraction, and reduced-order modeling techniques to perform rapid optimization of the MCPM module compared to the traditional, manual, and iterative design approach. However, that version is limited by several key factors: layout representation technique, layout generation algorithms, iterative design-rule-checking (DRC), optimization algorithm candidates, etc. To address these limitations, and enhance PowerSynth’s capabilities, constraint-aware, scalable, and efficient algorithms have been developed and implemented. PowerSynth layout engine has evolved from v1.3 to v2.0 throughout the last five years to incorporate the algorithm updates and generate all 2D/2.5D/3D Manhattan layout solutions. These fundamental changes in the layout generation methodology have also called for updates in the performance modeling techniques and enabled exploring different optimization algorithms. The latest PowerSynth 2 architecture has been implemented to enable electro-thermo-mechanical and reliability optimization on 2D/2.5D/3D MCPM layouts, and set up a path toward cabinet-level optimization. PowerSynth v2.0 computer-aided design (CAD) flow has been hardware-validated through manufacturing and testing of an optimized novel 3D MCPM layout. The flow has shown significant speedup compared to the manual design flow with a comparable optimization result

SCEE 2008 book of abstracts : the 7th International Conference on Scientific Computing in Electrical Engineering (SCEE 2008), September 28 – October 3, 2008, Helsinki University of Technology, Espoo, Finland

This report contains abstracts of presentations given at the SCEE 2008 conference.reviewe