10,919 research outputs found
Logical topology design for IP rerouting: ASONs versus static OTNs
IP-based backbone networks are gradually moving to a network model consisting of high-speed routers that are flexibly interconnected by a mesh of light paths set up by an optical transport network that consists of wavelength division multiplexing (WDM) links and optical cross-connects. In such a model, the generalized MPLS protocol suite could provide the IP centric control plane component that will be used to deliver rapid and dynamic circuit provisioning of end-to-end optical light paths between the routers. This is called an automatic switched optical (transport) network (ASON). An ASON enables reconfiguration of the logical IP topology by setting up and tearing down light paths. This allows to up- or downgrade link capacities during a router failure to the capacities needed by the new routing of the affected traffic. Such survivability against (single) IP router failures is cost-effective, as capacity to the IP layer can be provided flexibly when necessary. We present and investigate a logical topology optimization problem that minimizes the total amount or cost of the needed resources (interfaces, wavelengths, WDM line-systems, amplifiers, etc.) in both the IP and the optical layer. A novel optimization aspect in this problem is the possibility, as a result of the ASON, to reuse the physical resources (like interface cards and WDM line-systems) over the different network states (the failure-free and all the router failure scenarios). We devised a simple optimization strategy to investigate the cost of the ASON approach and compare it with other schemes that survive single router failures
Optimized Design of Survivable MPLS over Optical Transport Networks. Optical Switching and Networking
In this paper we study different options for the survivability implementation
in MPLS over Optical Transport Networks in terms of network resource usage and
configuration cost. We investigate two approaches to the survivability
deployment: single layer and multilayer survivability and present various
methods for spare capacity allocation (SCA) to reroute disrupted traffic. The
comparative analysis shows the influence of the traffic granularity on the
survivability cost: for high bandwidth LSPs, close to the optical channel
capacity, the multilayer survivability outperforms the single layer one,
whereas for low bandwidth LSPs the single layer survivability is more
cost-efficient. For the multilayer survivability we demonstrate that by mapping
efficiently the spare capacity of the MPLS layer onto the resources of the
optical layer one can achieve up to 22% savings in the total configuration cost
and up to 37% in the optical layer cost. Further savings (up to 9 %) in the
wavelength use can be obtained with the integrated approach to network
configuration over the sequential one, however, at the increase in the
optimization problem complexity. These results are based on a cost model with
actual technology pricing and were obtained for networks targeted to a
nationwide coverage
Practical issues for the implementation of survivability and recovery techniques in optical networks
- …