A method for analyzing the performance aspects of the fault-tolerance mechanisms in FDDI

The ability of error recovery mechanisms to make the Fiber Distributed Data Interface (FDDI) satisfy real-time performance constraints in the presence of errors is analyzed. A complicating factor in these analyses is the rarity of the error occurrences, which makes direct simulation unattractive. Therefore, a fast simulation technique, called injection simulation, which makes it possible to analyze the performance of FDDI, including its fault tolerance behavior, was developed. The implementation of injection simulation for polling models of FDDI is discussed, along with simulation result

Space Station Freedom data management system growth and evolution report

The Information Sciences Division at the NASA Ames Research Center has completed a 6-month study of portions of the Space Station Freedom Data Management System (DMS). This study looked at the present capabilities and future growth potential of the DMS, and the results are documented in this report. Issues have been raised that were discussed with the appropriate Johnson Space Center (JSC) management and Work Package-2 contractor organizations. Areas requiring additional study have been identified and suggestions for long-term upgrades have been proposed. This activity has allowed the Ames personnel to develop a rapport with the JSC civil service and contractor teams that does permit an independent check and balance technique for the DMS

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions

Advanced information processing system for advanced launch system: Avionics architecture synthesis

The Advanced Information Processing System (AIPS) is a fault-tolerant distributed computer system architecture that was developed to meet the real time computational needs of advanced aerospace vehicles. One such vehicle is the Advanced Launch System (ALS) being developed jointly by NASA and the Department of Defense to launch heavy payloads into low earth orbit at one tenth the cost (per pound of payload) of the current launch vehicles. An avionics architecture that utilizes the AIPS hardware and software building blocks was synthesized for ALS. The AIPS for ALS architecture synthesis process starting with the ALS mission requirements and ending with an analysis of the candidate ALS avionics architecture is described

Deep Space Network information system architecture study

The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control

CSP channels for CAN-bus connected embedded control systems

Closed loop control system typically contains multitude of sensors and actuators operated simultaneously. So they are parallel and distributed in its essence. But when mapping this parallelism to software, lot of obstacles concerning multithreading communication and synchronization issues arise. To overcome this problem, the CT kernel/library based on CSP algebra has been developed. This project (TES.5410) is about developing communication extension to the CT library to make it applicable in distributed systems. Since the library is tailored for control systems, properties and requirements of control systems are taken into special consideration. Applicability of existing middleware solutions is examined. A comparison of applicable fieldbus protocols is done in order to determine most suitable ones and CAN fieldbus is chosen to be first fieldbus used. Brief overview of CSP and existing CSP based libraries is given. Middleware architecture is proposed along with few novel ideas

Computational needs survey of NASA automation and robotics missions. Volume 2: Appendixes

NASA's operational use of advanced processor technology in space systems lags behind its commercial development by more than eight years. One of the factors contributing to this is the fact that mission computing requirements are frequency unknown, unstated, misrepresented, or simply not available in a timely manner. NASA must provide clear common requirements to make better use of available technology, to cut development lead time on deployable architectures, and to increase the utilization of new technology. Here, NASA, industry and academic communities are provided with a preliminary set of advanced mission computational processing requirements of automation and robotics (A and R) systems. The results were obtained in an assessment of the computational needs of current projects throughout NASA. The high percent of responses indicated a general need for enhanced computational capabilities beyond the currently available 80386 and 68020 processor technology. Because of the need for faster processors and more memory, 90 percent of the polled automation projects have reduced or will reduce the scope of their implemented capabilities. The requirements are presented with respect to their targeted environment, identifying the applications required, system performance levels necessary to support them, and the degree to which they are met with typical programmatic constraints. Here, appendixes are provided

Multilevel Parallel Communications

The research reported in this thesis investigates the use of parallelism at multiple levels to realize high-speed networks that offer advantages in throughput, cost, reliability, and flexibility over alternative approaches. This research specifically considers use of parallelism at two levels: the upper level and the lower level. At the upper level, N protocol processors perform functions included in the transport and network layers. At the lower level, M channels provide data and physical layer functions. The resulting system provides very high bandwidth to an application. A key concept of this research is the use of replicated channels to provide a single, high bandwidth channel to a single application. The parallelism provided by the network is transparent to communicating applications, thus differentiating this strategy from schemes that provide a collection of disjoint channels between applications on different nodes. Another innovative aspect of this research is that parallelism is exploited at multiple layers of the network to provide high throughput not only at the physical layer, but also at upper protocol layers. Schedulers are used to distribute data from a single stream to multiple channels and to merge data from multiple channels to reconstruct a single coherent stream. High throughput is possible by providing the combined bandwidth of multiple channels to a single source and destination through use of parallelism at multiple protocol layers. This strategy is cost effective since systems can be built using standard technologies that benefit from the economies of a broad applications base. The exotic and revolutionary components needed in non-parallel approaches to build high speed networks are not required. The replicated channels can be used to achieve high reliability as well. Multilevel parallelism is flexible since the degree of parallelism provided at any level can be matched to protocol processing demands and application requirements