Coverage Protocols for Wireless Sensor Networks: Review and Future Directions

The coverage problem in wireless sensor networks (WSNs) can be generally defined as a measure of how effectively a network field is monitored by its sensor nodes. This problem has attracted a lot of interest over the years and as a result, many coverage protocols were proposed. In this survey, we first propose a taxonomy for classifying coverage protocols in WSNs. Then, we classify the coverage protocols into three categories (i.e. coverage aware deployment protocols, sleep scheduling protocols for flat networks, and cluster-based sleep scheduling protocols) based on the network stage where the coverage is optimized. For each category, relevant protocols are thoroughly reviewed and classified based on the adopted coverage techniques. Finally, we discuss open issues (and recommend future directions to resolve them) associated with the design of realistic coverage protocols. Issues such as realistic sensing models, realistic energy consumption models, realistic connectivity models and sensor localization are covered

Dead Reckoning Localization Technique for Mobile Wireless Sensor Networks

Localization in wireless sensor networks not only provides a node with its geographical location but also a basic requirement for other applications such as geographical routing. Although a rich literature is available for localization in static WSN, not enough work is done for mobile WSNs, owing to the complexity due to node mobility. Most of the existing techniques for localization in mobile WSNs uses Monte-Carlo localization, which is not only time-consuming but also memory intensive. They, consider either the unknown nodes or anchor nodes to be static. In this paper, we propose a technique called Dead Reckoning Localization for mobile WSNs. In the proposed technique all nodes (unknown nodes as well as anchor nodes) are mobile. Localization in DRLMSN is done at discrete time intervals called checkpoints. Unknown nodes are localized for the first time using three anchor nodes. For their subsequent localizations, only two anchor nodes are used. The proposed technique estimates two possible locations of a node Using Bezouts theorem. A dead reckoning approach is used to select one of the two estimated locations. We have evaluated DRLMSN through simulation using Castalia simulator, and is compared with a similar technique called RSS-MCL proposed by Wang and Zhu .Comment: Journal Paper, IET Wireless Sensor Systems, 201

Efficient AoA-based wireless indoor localization for hospital outpatients using mobile devices

The motivation of this work is to help outpatients find their corresponding departments or clinics, thus, it needs to provide indoor positioning services with a room-level accuracy. Unlike wireless outdoor localization that is dominated by the global positioning system (GPS), wireless indoor localization is still an open issue. Many different schemes are being developed to meet the increasing demand for indoor localization services. In this paper, we investigated the AoA-based wireless indoor localization for outpatients’ wayfinding in a hospital, where Wi-Fi access points (APs) are deployed, in line, on the ceiling. The target position can be determined by a mobile device, like a smartphone, through an efficient geometric calculation with two known APs coordinates and the angles of the incident radios. All possible positions in which the target may appear have been comprehensively investigated, and the corresponding solutions were proven to be the same. Experimental results show that localization error was less than 2.5 m, about 80% of the time, which can satisfy the outpatients’ requirements for wayfinding

Embracing Localization Inaccuracy: A Case Study

In recent years, indoor localization has become a hot research topic with some sophisticated solutions reaching accuracy on the order of ten centimeters. While certain classes of applications can justify the corresponding costs that come with these solutions, a wealth of applications have requirements that can be met at much lower cost by accepting lower accuracy. This paper explores one specific application for monitoring patients in a nursing home, showing that sufficient accuracy can be achieved with a carefully designed deployment of low-cost wireless sensor network nodes in combination with a simple RSSI-based localization technique. Notably our solution uses a single radio sample per period, a number that is much lower than similar approaches. This greatly eases the power burden of the nodes, resulting in a significant lifetime increase. This paper evaluates a concrete deployment from summer 2012 composed of fixed anchor motes throughout one floor of a nursing home and mobile units carried by patients. We show how two localization algorithms perform and demonstrate a clear improvement by following a set of simple guidelines to tune the anchor node placement. We show both quantitatively and qualitatively that the results meet the functional and non-functional system requirements

A Review of Range-based RSSI Algorithms for Indoor Wireless Sensor Network Localization

The secure localisation of unknown nodes in Wireless Sensor Networks (WSNs) is a crucial research topic due to the vast range of applications of WSNs. These applications drive the development of WSNs, as real-world obstacles typically motivate them. WSN technology is rapidly evolving, and this paper provides a brief overview of WSNs, including key research findings on energy conservation and node deployment. The paper discusses the applications of WSNs in medical health, environment and agriculture, intelligent home furnishing and construction, and military, space, and marine exploration. The paper focuses on the research of RSS-based locating algorithms in WSNs and is divided into two sections. Firstly, accurate location depends on the accurate RSSI received from nodes. This experiment analyses the distribution trend of RSSI and derives the loss model of signal propagation by processing experimental data. Secondly, Gaussian fitting calculates the distance between receiving and sending nodes by processing individual RSSI at different distances. The primary challenge in studying this RSSI range-based technique is the low positioning accuracy, low energy, and high error rate. To solve this problem, a recommended GA is used to find the optimal site by minimising error, providing the best feasible solution, and being energy-sensitive, with accuracy based on the least error inside the network. The proposed approach aims to optimise sensor placements for improved performance