IP Mobility Support in Multi-hop Vehicular Communications Networks

The combination of infrastructure-to-vehicle and vehicle-to-vehicle communications, namely the multi-hop Vehicular Communications Network (VCN) , appears as a promising solution for the ubiquitous access to IP services in vehicular environments. In this thesis, we address the challenges of multi-hop VCN, and investigate the seamless provision of IP services over such network. Three different schemes are proposed and analyzed. First, we study the limitations of current standards for the provision of IP services, such as 802.11p/WAVE, and propose a framework that enables multi-hop communications and a robust IP mobility mechanism over WAVE. An accurate analytical model is developed to evaluate the throughput performance, and to determine the feasibility of the deployment of IP-based services in 802.11p/WAVE networks. Next, the IP mobility support is extended to asymmetric multi-hop VCN. The proposed IP mobility and routing mechanisms react to the asymmetric links, and also employ geographic location and road traffic information to enable predictive handovers. Moreover, since multi-hop communications suffer from security threats, it ensures that all mobility signalling is authenticated among the participant vehicles. Last, we extend our study to a heterogeneous multi-hop VCN, and propose a hybrid scheme that allows for the on-going IP sessions to be transferred along the heterogeneous communications system. The proposed global IP mobility scheme focuses on urban vehicular scenarios, and enables seamless communications for in-vehicle networks, commuters, and pedestrians. The overall performance of IP applications over multi-hop VCN are improved substantially by the proposed schemes. This is demonstrated by means of analytical evaluations, as well as extensive simulations that are carried out in realistic highway and urban vehicular scenarios. More importantly, we believe that our dissertation provides useful analytical tools, for evaluating the throughput and delay performance of IP applications in multi-hop vehicular environments. In addition, we provide a set of practical and efficient solutions for the seamless support of IP tra c along the heterogeneous and multi-hop vehicular network, which will help on achieving ubiquitous drive-thru Internet, and infotainment traffic access in both urban and highway scenarios

Host mobility management with identifier-locator split protocols in hierarchical and flat networks

Includes abstractIncludes bibliographical references.As the Internet increasingly becomes more mobile focused and overloaded with mobile hosts, mobile users are bound to roam freely and attach to a variety of networks. These different networks converge over an IP-based core to enable ubiquitous network access, anytime and anywhere, to support the provision of services, that is, any service, to mobile users. Therefore, in this thesis, the researcher proposed network-based mobility solutions at different layers to securely support seamless handovers between heterogeneous networks in hierarchical and flat network architectures

Securing IP Mobility Management for Vehicular Ad Hoc Networks

The proliferation of Intelligent Transportation Systems (ITSs) applications, such as Internet access and Infotainment, highlights the requirements for improving the underlying mobility management protocols for Vehicular Ad Hoc Networks (VANETs). Mobility management protocols in VANETs are envisioned to support mobile nodes (MNs), i.e., vehicles, with seamless communications, in which service continuity is guaranteed while vehicles are roaming through different RoadSide Units (RSUs) with heterogeneous wireless technologies. Due to its standardization and widely deployment, IP mobility (also called Mobile IP (MIP)) is the most popular mobility management protocol used for mobile networks including VANETs. In addition, because of the diversity of possible applications, the Internet Engineering Task Force (IETF) issues many MIP's standardizations, such as MIPv6 and NEMO for global mobility, and Proxy MIP (PMIPv6) for localized mobility. However, many challenges have been posed for integrating IP mobility with VANETs, including the vehicle's high speeds, multi-hop communications, scalability, and ef ficiency. From a security perspective, we observe three main challenges: 1) each vehicle's anonymity and location privacy, 2) authenticating vehicles in multi-hop communications, and 3) physical-layer location privacy. In transmitting mobile IPv6 binding update signaling messages, the mobile node's Home Address (HoA) and Care-of Address (CoA) are transmitted as plain-text, hence they can be revealed by other network entities and attackers. The mobile node's HoA and CoA represent its identity and its current location, respectively, therefore revealing an MN's HoA means breaking its anonymity while revealing an MN's CoA means breaking its location privacy. On one hand, some existing anonymity and location privacy schemes require intensive computations, which means they cannot be used in such time-restricted seamless communications. On the other hand, some schemes only achieve seamless communication through low anonymity and location privacy levels. Therefore, the trade-off between the network performance, on one side, and the MN's anonymity and location privacy, on the other side, makes preservation of privacy a challenging issue. In addition, for PMIPv6 to provide IP mobility in an infrastructure-connected multi-hop VANET, an MN uses a relay node (RN) for communicating with its Mobile Access Gateway (MAG). Therefore, a mutual authentication between the MN and RN is required to thwart authentication attacks early in such scenarios. Furthermore, for a NEMO-based VANET infrastructure, which is used in public hotspots installed inside moving vehicles, protecting physical-layer location privacy is a prerequisite for achieving privacy in upper-layers such as the IP-layer. Due to the open nature of the wireless environment, a physical-layer attacker can easily localize users by employing signals transmitted from these users. In this dissertation, we address those security challenges by proposing three security schemes to be employed for different mobility management scenarios in VANETs, namely, the MIPv6, PMIPv6, and Network Mobility (NEMO) protocols. First, for MIPv6 protocol and based on the onion routing and anonymizer, we propose an anonymous and location privacy-preserving scheme (ALPP) that involves two complementary sub-schemes: anonymous home binding update (AHBU) and anonymous return routability (ARR). In addition, anonymous mutual authentication and key establishment schemes have been proposed, to authenticate a mobile node to its foreign gateway and create a shared key between them. Unlike existing schemes, ALPP alleviates the tradeoff between the networking performance and the achieved privacy level. Combining onion routing and the anonymizer in the ALPP scheme increases the achieved location privacy level, in which no entity in the network except the mobile node itself can identify this node's location. Using the entropy model, we show that ALPP achieves a higher degree of anonymity than that achieved by the mix-based scheme. Compared to existing schemes, the AHBU and ARR sub-schemes achieve smaller computation overheads and thwart both internal and external adversaries. Simulation results demonstrate that our sub-schemes have low control-packets routing delays, and are suitable for seamless communications. Second, for the multi-hop authentication problem in PMIPv6-based VANET, we propose EM3A, a novel mutual authentication scheme that guarantees the authenticity of both MN and RN. EM3A thwarts authentication attacks, including Denial of service (DoS), collusion, impersonation, replay, and man-in-the-middle attacks. EM3A works in conjunction with a proposed scheme for key establishment based on symmetric polynomials, to generate a shared secret key between an MN and an RN. This scheme achieves lower revocation overhead than that achieved by existing symmetric polynomial-based schemes. For a PMIP domain with n points of attachment and a symmetric polynomial of degree t, our scheme achieves t x 2^n-secrecy, whereas the existing symmetric polynomial-based authentication schemes achieve only t-secrecy. Computation and communication overhead analysis as well as simulation results show that EM3A achieves low authentication delay and is suitable for seamless multi-hop IP communications. Furthermore, we present a case study of a multi-hop authentication PMIP (MA-PMIP) implemented in vehicular networks. EM3A represents the multi-hop authentication in MA-PMIP to mutually authenticate the roaming vehicle and its relay vehicle. Compared to other authentication schemes, we show that our MA-PMIP protocol with EM3A achieves 99.6% and 96.8% reductions in authentication delay and communication overhead, respectively. Finally, we consider the physical-layer location privacy attacks in the NEMO-based VANETs scenario, such as would be presented by a public hotspot installed inside a moving vehicle. We modify the obfuscation, i.e., concealment, and power variability ideas and propose a new physical-layer location privacy scheme, the fake point-cluster based scheme, to prevent attackers from localizing users inside NEMO-based VANET hotspots. Involving the fake point and cluster based sub-schemes, the proposed scheme can: 1) confuse the attackers by increasing the estimation errors of their Received Signal Strength (RSSs) measurements, and 2) prevent attackers' monitoring devices from detecting the user's transmitted signals. We show that our scheme not only achieves higher location privacy, but also increases the overall network performance. Employing correctness, accuracy, and certainty as three different metrics, we analytically measure the location privacy achieved by our proposed scheme. In addition, using extensive simulations, we demonstrate that the fake point-cluster based scheme can be practically implemented in high-speed VANETs' scenarios

Virtual Mobility Domains - A Mobility Architecture for the Future Internet

The advances in hardware and wireless technologies have made mobile communication devices affordable by a vast user community. With the advent of rich multimedia and social networking content, an influx of myriads of applications, and Internet supported services, there is an increasing user demand for the Internet connectivity anywhere and anytime. Mobility management is thus a crucial requirement for the Internet today. This work targets novel mobility management techniques, designed to work with the Floating Cloud Tiered (FCT) internetworking model, proposed for a future Internet. We derive the FCT internetworking model from the tiered structure existing among Internet Service Provider (ISP) networks, to define their business and peering relationships. In our novel mobility management scheme, we define Virtual Mobility Domains (VMDs) of various scopes, that can support both intra and inter-domain roaming using a single address for a mobile node. The scheme is network based and hence imposes no operational load on the mobile node. This scheme is the first of its kind, by leveraging the tiered structure and its hierarchical properties, the collaborative network-based mobility management mechanism, and the inheritance information in the tiered addresses to route packets. The contributions of this PhD thesis can be summarized as follows: · We contribute to the literature with a comprehensive analysis of the future Internet architectures and mobility protocols over the period of 2002-2012, in light of their identity and handoff management schemes. We present a qualitative evaluation of current and future schemes on a unified platform. · We design and implement a novel user-centric future Internet mobility architecture called Virtual Mobility Domain. VMD proposes a seamless, network-based, unique collaborative mobility management within/across ASes and ISPs in the FCT Internetworking model. The analytical and simulation-based handoff performance analysis of the VMD architecture in comparison with the IPv6-based mobility protocols presents the considerable performance improvements achieved by the VMD architecture. · We present a novel and user-centric handoff cost framework to analyze handoff performance of different mobility schemes. The framework helps to examine the impacts of registration costs, signaling overhead, and data loss for Internet connected mobile users employing a unified cost metric. We analyze the effect of each parameter in the handoff cost framework on the handoff cost components. We also compare the handoff performance of IPv6-based mobility protocols to the VMD. · We present a handoff cost optimization problem and analysis of its characteristics. We consider a mobility user as the primary focus of our study. We then identify the suitable mathematical methods that can be leveraged to solve the problem. We model the handoff cost problem in an optimization tool. We also conduct a mobility study - best of our knowledge, first of its kind - on providing a guide for finding the number of handoffs in a typical VMD for any given user\u27s mobility model. Plugging the output of mobility study, we then conduct a numerical analysis to find out optimum VMD for a given user mobility model and check if the theoretical inferences are in agreement with the output of the optimization tool

SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS

A finales de los años noventa, y al comienzo del nuevo milenio, las redes inalámbricas han evolucionado bastante, pasando de ser sólo una tecnología prometedora para convertirse en un requisito para las actividades cotidianas en las sociedades desarrolladas. La infraestructura de transporte también ha evolucionado, ofreciendo comunicación a bordo para mejorar la seguridad vial y el acceso a contenidos de información y entretenimiento. Los requisitos de los usuarios finales se han hecho dependientes de la tecnología, lo que significa que sus necesidades de conectividad han aumentado debido a los diversos requisitos de las aplicaciones que se ejecutan en sus dispositivos móviles, tales como tabletas, teléfonos inteligentes, ordenadores portátiles o incluso ordenadores de abordo (On-Board Units (OBUs)) dentro de los vehículos. Para cumplir con dichos requisitos de conectividad, y teniendo en cuenta las diferentes redes inalámbricas disponibles, es necesario adoptar técnicas de Vertical Handover (VHO) para cambiar de red de forma transparente y sin necesidad de intervención del usuario. El objetivo de esta tesis es desarrollar algoritmos de decisión (Vertical Handover Decision Algorithms (VHDAs)) eficientes y escalables, optimizados para el contexto de las redes vehiculares. En ese sentido se ha propuesto, desarrollado y probado diferentes algoritmos de decisión basados en la infraestructura disponible en las actuales, y probablemente en las futuras, redes inalámbricas y redes vehiculares. Para ello se han combinado diferentes técnicas, métodos computacionales y modelos matemáticos, con el fin de garantizar una conectividad apropiada, y realizando el handover hacia las redes más adecuadas de manera a cumplir tanto con los requisitos de los usuarios como los requisitos de las aplicaciones. Con el fin de evaluar el contexto, se han utilizado diferentes herramientas para obtener información variada, como la disponibilidad de la red, el estado de la red, la geolocalizaciónMárquez Barja, JM. (2012). SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17869Palanci

Algorithmes d'adressage et routage pour des réseaux fortement mobiles à grande échelle

After successfully connecting machines and people later (world wide web), the new era of In-ternet is about connecting things. Due to increasing demands in terms of addresses, mobility, scalability, security and other new unattended challenges, the evolution of current Internet archi-tecture is subject to major debate worldwide. The Internet Architecture Board (IAB) workshop on Routing and Addressing report described the serious scalability problems faced by large backbone operators in terms of routing and addressing, illustrated by the unsustainable growth of the Default Free Zone (DFZ) routing tables. Some proposals tackled the scalability and IP semantics overload issues with two different approaches: evolutionary approach (backward com-patibility) or a revolutionary approach. Several design objectives (technical or high-level) guided researchers in their proposals. Mobility is definitely one of the main challenges.Inter-Vehicle Communication (IVC) attracts considerable attention from the research com-munity and the industry for its potential in providing Intelligent Transportation Systems (ITS) and passengers services. Vehicular Ad-Hoc Networks (VANETs) are emerging as a class of wire-less network, formed between moving vehicles equipped with wireless interfaces (cellular and WiFi) employing heterogeneous communication systems. A VANET is a form of mobile ad-hoc network that provides IVC among nearby vehicles and may involve the use of a nearby fixed equipment on the roadside. The impact of Internet-based vehicular services (infotainment) are quickly developing. Some of these applications, driver assistance services or traffic reports, have been there for a while. But market-enabling applications may also be an argument in favor of a more convenient journey. Such use cases are viewed as a motivation to further adoption of the ITS standards developed within IEEE, ETSI, and ISO.This thesis focuses on applying Future Internet paradigm to vehicle-to-Internet communica-tions in an attempt to define the solution space of Future Vehicular Internet. We first introduce two possible vehicle-to-Internet use cases and great enablers for IP based services : eHealth and Fully-electric Vehicles. We show how to integrate those use cases into IPv6 enabled networks. We further focus on the mobility architectures and determine the fundamental components of a mobility architecture. We then classify those approaches into centralized and distributed to show the current trends in terms of network mobility extension, an essential component to vehicular networking. We eventually analyze the performance of these proposals. In order to define an identifier namespace for vehicular communications, we introduce the Vehicle Identification Numbers are possible candidates. We then propose a conversion algorithm that preserves the VIN characteristics while mapping it onto usable IPv6 networking objects (ad-dresses, prefixes, and Mobile Node Identifiers). We make use of this result to extend LISP-MN protocol with the support of our VIN6 addressing architecture. We also apply those results to group IP-based communications, when the cluster head is in charge of a group of followers.Cette thèse a pour objectif de faire avancer l'état de l'art des communications basée sur Internet Protocol version 6 (IPv6) dans le domaine des réseaux véhiculaires, et ce dans le cadre des évolutions récentes de IP, notamment l'avènement du Future Internet. Le Future Internet (F.I.) définit un ensemble d'approches pour faire évoluer l'Internet actuel , en particulier l'émergence d'un Internet mobile exigeant en ressources. Les acteurs de ce domaine définissent les contraintes inhérentes aux approches utilisées historiquement dans l'évolution de l'architecture d'Internet et tentent d'y remédier soit de manière évolutive soit par une rupture technologique (révolutionnaire). Un des problèmes au centre de cette nouvelle évolution d'Internet est la question du nommage et de l'adressage dans le réseau. Nous avons entrepris dans cette thèse l'étude de ce problème, dans le cadre restreint des communications véhiculaires Internet.Dans ce contexte, l'état de l'art du Future Internet a mis en avant les distinctions des approches révolutionnaires comparées aux propositions évolutives basées sur IPv6. Les réseaux véhiculaires étant d'ores-et-déjà dotés de piles protocolaires comprenant une extension IPv6, nous avons entamé une approche évolutive visant à intégrer les réseaux véhiculaires au Future Internet. Une première proposition a été de convertir un identifiant présent dans le monde automobile (VIN, Numéro d'Identification de Véhicule) en un lot d'adresses réseau propres à chaque véhicule (qui est donc propriétaire de son adressage issu de son identifiant). Cette proposition étant centrée sur le véhicule, nous avons ensuite intégré ces communications basés dans une architecture globale Future Internet basée sur IPv6 (protocole LISP). En particulier, et avec l'adressage VIN, nous avons défini un espace d'adressage indépendant des fournisseurs d'accès à Internet où le constructeur automobile devient acteur économique fournissant des services IPv6 à sa flotte de véhicules conjointement avec les opérateurs réseau dont il dépend pour transporter son trafic IP. Nous nous sommes ensuite intéressés à l'entourage proche du véhicule afin de définir un nouveau mode de communication inter-véhiculaire à Internet: le V2V2I (Angl. Vehicle-to-Vehicle-to-Infrastructure). Jusqu'à présent, les modes de transmission de données à Internet dans le monde du véhicule consistaient en des topologies V2I, à savoir véhicule à Internet, où le véhicule accède à l'infrastructure directement sans intermédiaire. Dans le cadre des communications véhiculaires à Internet, nous proposons une taxonomie des méthodes existantes dans l'état de l'art. Les techniques du Future Internet étant récentes, nous avons étendu notre taxonomie par une nouvelle approche basée sur la séparation de l'adressage topologique dans le cluster de celui de l'infrastructure. Le leader du cluster s'occupe d'affecter les adresses (de son VIN) et de gérer le routage à l'intérieur de son cluster. La dernière contribution consiste en la comparaison des performances des protocoles de gestion de mobilité, notamment pour les réseaux de véhicules et des communications de type vehicule-à-Internet. Dans ce cadre, nous avons proposé une classification des protocoles de gestion de mobilité selon leur déploiement: centralisé (basé réseau ou host) et distribué. Nous avons ensuite évalué les performances en modélisant les durées de configurations et de reconfigurations des différents protocoles concernés

MP-CFM: MPTCP-Based communication functional module for next generation ERTMS

184 p. El contenido de los capítulos 4,5,6,7,8 y 9 está sujeto a confidencialidadEl Sistema Europeo de Gestión del Tráfico Ferroviario (ERTMS, por sus siglasen inglés), fue originalmente diseñado para los ferrocarriles europeos. Sinembargo, a lo largo de las dos últimas décadas, este sistema se ha convertidoen el estándar de-facto para los servicios de Alta Velocidad en la mayoría depaíses desarrollados.El sistema ERTMS se compone de tres subsistemas principales: 1) el Sistemade Control Ferroviario Europeo (ETCS, por sus siglas en inglés), que actúacomo aplicación de señalización; 2) el sistema Euroradio, que a su vez estádividido en dos subsistemas, el Módulo de Seguridad Funcional (SFM, porsus siglas en inglés), y el Módulo de Comunicación Funcional (CFM, porsus siglas en inglés); y 3) el sistema de comunicaciones subyacente, GSM-R,que transporta la información intercambiada entre el sistema embarcado enel tren (OBU, por sus siglas en inglés) y el Centro de Bloqueo por Radio(RBC, por sus siglas en inglés). El sistema de señalización ETCS soporta tresniveles dependiendo del nivel de prestaciones soportadas. En el nivel 3 seintroduce la posibilidad de trabajar con bloques móviles en lugar de bloquesfijos definidos en la vía. Esto implica que la distancia de avance entre dos trenesconsecutivos puede ser reducida a una distancia mínima en la que se garanticela seguridad del servicio, aumentando por tanto la capacidad del corredorferroviario. Esta distancia de seguridad viene determinada por la combinaciónde la distancia de frenado del tren y el retraso de las comunicaciones deseñalización. Por lo tanto, se puede afirmar que existe una relación directaentre los retrasos y la confiabilidad de las transmisiones de las aplicaciones deseñalización y la capacidad operacional de un corredor ferroviario. Así pues,el estudio y mejora de los sistemas de comunicaciones utilizados en ERTMSjuegan un papel clave en la evolución del sistema ERTMS. Asimismo, unaoperatividad segura en ERTMS, desde el punto de vista de las comunicacionesimplicadas en la misma, viene determinada por la confiabilidad de lascomunicaciones, la disponibilidad de sus canales de comunicación, el retrasode las comunicaciones y la seguridad de sus mensajes.Unido este hecho, la industria ferroviaria ha venido trabajando en ladigitalización y la transición al protocolo IP de la mayor parte de los sistemasde señalización. Alineado con esta tendencia, el consorcio industrial UNISIGha publicado recientemente un nuevo modelo de comunicaciones para ERTMSque incluye la posibilidad, no solo de operar con el sistema tradicional,basado en tecnología de conmutación de circuitos, sino también con un nuevosistema basado en IP. Esta tesis está alineada con el contexto de migraciónactual y pretende contribuir a mejorar la disponibilidad, confiabilidad yseguridad de las comunicaciones, tomando como eje fundamental los tiemposde transmisión de los mensajes, con el horizonte puesto en la definición deuna próxima generación de ERTMS, definida en esta tesis como NGERTMS.En este contexto, se han detectado tres retos principales para reforzar laresiliencia de la arquitectura de comunicaciones del NGERTMS: 1) mejorarla supervivencia de las comunicaciones ante disrupciones; 2) superar laslimitaciones actuales de ERTMS para enviar mensajes de alta prioridad sobretecnología de conmutación de paquetes, dotando a estos mensajes de un mayorgrado de resiliencia y menor latencia respecto a los mensajes ordinarios; y3) el aumento de la seguridad de las comunicaciones y el incremento de ladisponibilidad sin que esto conlleve un incremento en la latencia.Considerando los desafíos previamente descritos, en esta tesis se proponeuna arquitectura de comunicaciones basada en el protocolo MPTCP, llamadaMP-CFM, que permite superar dichos desafíos, a la par que mantener laretrocompatibilidad con el sistema de comunicaciones basado en conmutaciónde paquetes recientemente propuesto por UNISIG. Hasta el momento, esta esla primera vez que se propone una arquitectura de comunicaciones completacapaz de abordar los desafíos mencionados anteriormente. Esta arquitecturaimplementa cuatro tipos de clase de servicio, los cuales son utilizados porlos paquetes ordinarios y de alta prioridad para dos escenarios distintos; unescenario en el que ambos extremos, el sistema embarcado o OBU y el RBC,disponen de múltiples interfaces de red; y otro escenario transicional en el cualel RBC sí tiene múltiples interfaces de red pero el OBU solo dispone de unaúnica interfaz. La arquitectura de comunicaciones propuesta para el entornoferroviario ha sido validada mediante un entorno de simulación desarrolladopara tal efecto. Es más, dichas simulaciones demuestran que la arquitecturapropuesta, ante disrupciones de canal, supera con creces en términos derobustez el sistema diseñado por UNISIG. Como conclusión, se puede afirmarque en esta tesis se demuestra que una arquitectura de comunicaciones basadade MPTCP cumple con los exigentes requisitos establecidos para el NGERTMSy por tanto dicha propuesta supone un avance en la evolución del sistema deseñalización ferroviario europeo

Mobilidade em redes veiculares com múltiplos pontos de acesso à infraestrutura

Mestrado em Engenharia Eletrónica e TelecomunicaçõesNowadays there is a huge evolution in the technological world and in the wireless networks. The electronic devices have more capabilities and resources over the years, which makes the users more and more demanding. The necessity of being connected to the global world leads to the arising of wireless access points in the cities to provide internet access to the people in order to keep the constant interaction with the world. Vehicular networks arise to support safety related applications and to improve the traffic flow in the roads; however, nowadays they are also used to provide entertainment to the users present in the vehicles. The best way to increase the utilization of the vehicular networks is to give to the users what they want: a constant connection to the internet. Despite of all the advances in the vehicular networks, there were several issues to be solved. The presence of dedicated infrastructure to vehicular networks is not wide yet, which leads to the need of using the available Wi-Fi hotspots and the cellular networks as access networks. In order to make all the management of the mobility process and to keep the user’s connection and session active, a mobility protocol is needed. Taking into account the huge number of access points present at the range of a vehicle for example in a city, it will be beneficial to take advantage of all available resources in order to improve all the vehicular network, either to the users and to the operators. The concept of multihoming allows to take advantage of all available resources with multiple simultaneous connections. This dissertation has as objectives the integration of a mobility protocol, the Network-Proxy Mobile IPv6 protocol, with a host-multihoming per packet solution in order to increase the performance of the network by using more resources simultaneously, the support of multi-hop communications, either in IPv6 or IPv4, the capability of providing internet access to the users of the network, and the integration of the developed protocol in the vehicular environment, with the WAVE, Wi-Fi and cellular technologies. The performed tests focused on the multihoming features implemented on this dissertation, and on the IPv4 network access for the normal users. The obtained results show that the multihoming addition to the mobility protocol improves the network performance and provides a better resource management. Also, the results show the correct operation of the developed protocol in a vehicular environment.Nos dias de hoje assistimos a uma grande evolução no mundo da tecnologia e das redes sem fios. Os dispositivos eletrónicos possuem cada vez mais capacidades e recursos, o que torna os utilizadores também cada vez mais exigentes. A necessidade de estar permanentemente ligado a uma rede global leva a que cada vez existam mais pontos de acesso à internet para as pessoas estarem em constante interação com o mundo. As redes veiculares surgiram para suportar aplicações de segurança rodoviária e para melhorar o fluxo rodoviário nas estradas, mas agora são também vistas como uma forma de proporcionar entretenimento aos utilizadores presentes nos veículos. Apesar de todos os avanços na área de redes veiculares ainda existem muitos desafios para serem resolvidos. A presença de infraestrutura dedicada para as redes veiculares ainda não é muito vasta, o que leva a ser necessário a utilização de hotspots Wi-Fi e de rede celular como redes de acesso. Para fazer toda a gestão da mobilidade e também para manter a ligação do utilizador ativa é necessário utilizar um protocolo de mobilidade. Tendo em conta também o grande número de pontos de acesso presentes ao alcance de um veículo numa cidade por exemplo, seria útil poder usufruir de todos os recursos disponíveis de modo a melhorar toda a rede veicular, quer para os utilizadores quer para os operadores. O conceito de multihoming permite usufruir de todos os recursos viáveis ao alcance de um veículo, através de ligações simultâneas. Esta dissertação tem como objetivos a integração de um protocolo de mobilidade, o protocolo Network-Proxy Mobile IPv6, com uma abordagem de multihoming por pacote, de modo a aumentar o desempenho da rede veicular através da utilização de mais recursos em simultâneo, o suporte de comunicações em multi-hop, a capacidade de fornecer acesso à internet para os utilizadores das redes veiculares, e a integração do protocolo desenvolvido num ambiente veicular, com as tecnologias de rede WAVE, Wi-Fi e celular. Os testes realizados focaram-se nas características de multihoming implementadas e na utilização da rede veicular através uma rede IPv4 para os utilizadores comuns. Os resultados obtidos mostram que a adição de multihoming ao protocolo de mobilidade melhora o desempenho da rede e oferece uma melhor gestão dos recursos disponíveis. Além disso, os resultados mostram também a correta operação do protocolo desenvolvido num ambiente veicular

MP-CFM: MPTCP-Based communication functional module for next generation ERTMS

184 p. El contenido de los capítulos 4,5,6,7,8 y 9 está sujeto a confidencialidadEl Sistema Europeo de Gestión del Tráfico Ferroviario (ERTMS, por sus siglasen inglés), fue originalmente diseñado para los ferrocarriles europeos. Sinembargo, a lo largo de las dos últimas décadas, este sistema se ha convertidoen el estándar de-facto para los servicios de Alta Velocidad en la mayoría depaíses desarrollados.El sistema ERTMS se compone de tres subsistemas principales: 1) el Sistemade Control Ferroviario Europeo (ETCS, por sus siglas en inglés), que actúacomo aplicación de señalización; 2) el sistema Euroradio, que a su vez estádividido en dos subsistemas, el Módulo de Seguridad Funcional (SFM, porsus siglas en inglés), y el Módulo de Comunicación Funcional (CFM, porsus siglas en inglés); y 3) el sistema de comunicaciones subyacente, GSM-R,que transporta la información intercambiada entre el sistema embarcado enel tren (OBU, por sus siglas en inglés) y el Centro de Bloqueo por Radio(RBC, por sus siglas en inglés). El sistema de señalización ETCS soporta tresniveles dependiendo del nivel de prestaciones soportadas. En el nivel 3 seintroduce la posibilidad de trabajar con bloques móviles en lugar de bloquesfijos definidos en la vía. Esto implica que la distancia de avance entre dos trenesconsecutivos puede ser reducida a una distancia mínima en la que se garanticela seguridad del servicio, aumentando por tanto la capacidad del corredorferroviario. Esta distancia de seguridad viene determinada por la combinaciónde la distancia de frenado del tren y el retraso de las comunicaciones deseñalización. Por lo tanto, se puede afirmar que existe una relación directaentre los retrasos y la confiabilidad de las transmisiones de las aplicaciones deseñalización y la capacidad operacional de un corredor ferroviario. Así pues,el estudio y mejora de los sistemas de comunicaciones utilizados en ERTMSjuegan un papel clave en la evolución del sistema ERTMS. Asimismo, unaoperatividad segura en ERTMS, desde el punto de vista de las comunicacionesimplicadas en la misma, viene determinada por la confiabilidad de lascomunicaciones, la disponibilidad de sus canales de comunicación, el retrasode las comunicaciones y la seguridad de sus mensajes.Unido este hecho, la industria ferroviaria ha venido trabajando en ladigitalización y la transición al protocolo IP de la mayor parte de los sistemasde señalización. Alineado con esta tendencia, el consorcio industrial UNISIGha publicado recientemente un nuevo modelo de comunicaciones para ERTMSque incluye la posibilidad, no solo de operar con el sistema tradicional,basado en tecnología de conmutación de circuitos, sino también con un nuevosistema basado en IP. Esta tesis está alineada con el contexto de migraciónactual y pretende contribuir a mejorar la disponibilidad, confiabilidad yseguridad de las comunicaciones, tomando como eje fundamental los tiemposde transmisión de los mensajes, con el horizonte puesto en la definición deuna próxima generación de ERTMS, definida en esta tesis como NGERTMS.En este contexto, se han detectado tres retos principales para reforzar laresiliencia de la arquitectura de comunicaciones del NGERTMS: 1) mejorarla supervivencia de las comunicaciones ante disrupciones; 2) superar laslimitaciones actuales de ERTMS para enviar mensajes de alta prioridad sobretecnología de conmutación de paquetes, dotando a estos mensajes de un mayorgrado de resiliencia y menor latencia respecto a los mensajes ordinarios; y3) el aumento de la seguridad de las comunicaciones y el incremento de ladisponibilidad sin que esto conlleve un incremento en la latencia.Considerando los desafíos previamente descritos, en esta tesis se proponeuna arquitectura de comunicaciones basada en el protocolo MPTCP, llamadaMP-CFM, que permite superar dichos desafíos, a la par que mantener laretrocompatibilidad con el sistema de comunicaciones basado en conmutaciónde paquetes recientemente propuesto por UNISIG. Hasta el momento, esta esla primera vez que se propone una arquitectura de comunicaciones completacapaz de abordar los desafíos mencionados anteriormente. Esta arquitecturaimplementa cuatro tipos de clase de servicio, los cuales son utilizados porlos paquetes ordinarios y de alta prioridad para dos escenarios distintos; unescenario en el que ambos extremos, el sistema embarcado o OBU y el RBC,disponen de múltiples interfaces de red; y otro escenario transicional en el cualel RBC sí tiene múltiples interfaces de red pero el OBU solo dispone de unaúnica interfaz. La arquitectura de comunicaciones propuesta para el entornoferroviario ha sido validada mediante un entorno de simulación desarrolladopara tal efecto. Es más, dichas simulaciones demuestran que la arquitecturapropuesta, ante disrupciones de canal, supera con creces en términos derobustez el sistema diseñado por UNISIG. Como conclusión, se puede afirmarque en esta tesis se demuestra que una arquitectura de comunicaciones basadade MPTCP cumple con los exigentes requisitos establecidos para el NGERTMSy por tanto dicha propuesta supone un avance en la evolución del sistema deseñalización ferroviario europeo

Improving initiation, decision and execution phases for vertical handover in heterogeneous wireless mobile networks

One of the challenging issues in Next Generation Wireless Systems (NGWS) is seamless Vertical Handover (VHO) during the mobility between different types of technologies (3GPP and non-3GPP) such as Global System for Mobile Communication (GSM), Wireless Fidelity (Wi-Fi), Worldwide Interoperability for Microwave Access (WiMAX), Universal Mobile Telecommunications System (UMTS) and Long Term Evolution (LTE). Therefore, the telecommunication operators are required to develop aninteroperability strategy for these different types of existing networks to get the best connection anywhere, anytime without interruption of the ongoing sessions. In order to identify this problem accurately, the research study presented in this thesis provides four surveys about VHO approaches found in the literature. In these surveys, we classify the existing VHO approaches into categories based on the available VHO techniques for which we present their objectives and performances issues. After that, we propose an optimised VHO approach based on the VHO approaches that have been studied in the literature and take into consideration the research problems and conclusions which arearisen in our surveys. The proposed approach demonstrates better performance (packet loss, latency and signaling cost), less VHO connection failure (probability of minimising VHO reject sessions), less complexity and an enhanced VHO compared with that foundin the literature. It consists of a procedure which is implemented by an algorithm. The proposed procedure of loose coupling and Mobile Internet Protocol version 4 (MIPv4) provides early buffering for new data packets to minimise VHO packet loss and latency. Analysis and simulation of the proposed procedure show that the VHO packet loss and latency are significantly reduced compared with previous MIPv6 procedures found in the literature.The proposed algorithm is composed of two main parts: Handover Initiation and Optimum Radio Access Technologies (RATs) list of priority. The first part includes two main types of VHO and gives priority to imperative sessions over alternative sessions. IIIThis part is also responsible for deciding when and where to perform the handover by choosing the best RATs from the multiple ones available. Then, it passes them to the decision phase. This results in reducing the signaling cost and the inevitable degradation in Quality of Service (QoS) as a result of avoiding unnecessary handover processes. The second part defines RATs list of priority to minimise VHO connection failure. Analysis and simulation based performance evaluations then demonstrate that the proposed algorithm outperforms the traditional algorithms in terms of: (a) the probability of VHOconnection failure as a result of using the optimum RATs list of priority and (b) thesignaling cost and the inevitable degradation in QoS as a result of avoiding unnecessary handover processes