4,980 research outputs found
Coverage Protocols for Wireless Sensor Networks: Review and Future Directions
The coverage problem in wireless sensor networks (WSNs) can be generally
defined as a measure of how effectively a network field is monitored by its
sensor nodes. This problem has attracted a lot of interest over the years and
as a result, many coverage protocols were proposed. In this survey, we first
propose a taxonomy for classifying coverage protocols in WSNs. Then, we
classify the coverage protocols into three categories (i.e. coverage aware
deployment protocols, sleep scheduling protocols for flat networks, and
cluster-based sleep scheduling protocols) based on the network stage where the
coverage is optimized. For each category, relevant protocols are thoroughly
reviewed and classified based on the adopted coverage techniques. Finally, we
discuss open issues (and recommend future directions to resolve them)
associated with the design of realistic coverage protocols. Issues such as
realistic sensing models, realistic energy consumption models, realistic
connectivity models and sensor localization are covered
An efficient genetic algorithm for large-scale planning of robust industrial wireless networks
An industrial indoor environment is harsh for wireless communications
compared to an office environment, because the prevalent metal easily causes
shadowing effects and affects the availability of an industrial wireless local
area network (IWLAN). On the one hand, it is costly, time-consuming, and
ineffective to perform trial-and-error manual deployment of wireless nodes. On
the other hand, the existing wireless planning tools only focus on office
environments such that it is hard to plan IWLANs due to the larger problem size
and the deployed IWLANs are vulnerable to prevalent shadowing effects in harsh
industrial indoor environments. To fill this gap, this paper proposes an
overdimensioning model and a genetic algorithm based over-dimensioning (GAOD)
algorithm for deploying large-scale robust IWLANs. As a progress beyond the
state-of-the-art wireless planning, two full coverage layers are created. The
second coverage layer serves as redundancy in case of shadowing. Meanwhile, the
deployment cost is reduced by minimizing the number of access points (APs); the
hard constraint of minimal inter-AP spatial paration avoids multiple APs
covering the same area to be simultaneously shadowed by the same obstacle. The
computation time and occupied memory are dedicatedly considered in the design
of GAOD for large-scale optimization. A greedy heuristic based
over-dimensioning (GHOD) algorithm and a random OD algorithm are taken as
benchmarks. In two vehicle manufacturers with a small and large indoor
environment, GAOD outperformed GHOD with up to 20% less APs, while GHOD
outputted up to 25% less APs than a random OD algorithm. Furthermore, the
effectiveness of this model and GAOD was experimentally validated with a real
deployment system
Movement-Efficient Sensor Deployment in Wireless Sensor Networks With Limited Communication Range.
We study a mobile wireless sensor network (MWSN) consisting of multiple
mobile sensors or robots. Three key factors in MWSNs, sensing quality, energy
consumption, and connectivity, have attracted plenty of attention, but the
interaction of these factors is not well studied. To take all the three factors
into consideration, we model the sensor deployment problem as a constrained
source coding problem. %, which can be applied to different coverage tasks,
such as area coverage, target coverage, and barrier coverage. Our goal is to
find an optimal sensor deployment (or relocation) to optimize the sensing
quality with a limited communication range and a specific network lifetime
constraint. We derive necessary conditions for the optimal sensor deployment in
both homogeneous and heterogeneous MWSNs. According to our derivation, some
sensors are idle in the optimal deployment of heterogeneous MWSNs. Using these
necessary conditions, we design both centralized and distributed algorithms to
provide a flexible and explicit trade-off between sensing uncertainty and
network lifetime. The proposed algorithms are successfully extended to more
applications, such as area coverage and target coverage, via properly selected
density functions. Simulation results show that our algorithms outperform the
existing relocation algorithms
Movement-efficient Sensor Deployment in Wireless Sensor Networks
We study a mobile wireless sensor network (MWSN) consisting of multiple
mobile sensors or robots. Two key issues in MWSNs - energy consumption, which
is dominated by sensor movement, and sensing coverage - have attracted plenty
of attention, but the interaction of these issues is not well studied. To take
both sensing coverage and movement energy consumption into consideration, we
model the sensor deployment problem as a constrained source coding problem. %,
which can be applied to different coverage tasks, such as area coverage, target
coverage, and barrier coverage. Our goal is to find an optimal sensor
deployment to maximize the sensing coverage with specific energy constraints.
We derive necessary conditions to the optimal sensor deployment with (i) total
energy constraint and (ii) network lifetime constraint. Using these necessary
conditions, we design Lloyd-like algorithms to provide a trade-off between
sensing coverage and energy consumption. Simulation results show that our
algorithms outperform the existing relocation algorithms.Comment: 18 pages, 10 figure
An efficient genetic algorithm for large-scale transmit power control of dense and robust wireless networks in harsh industrial environments
The industrial wireless local area network (IWLAN) is increasingly dense, due to not only the penetration of wireless applications to shop floors and warehouses, but also the rising need of redundancy for robust wireless coverage. Instead of simply powering on all access points (APs), there is an unavoidable need to dynamically control the transmit power of APs on a large scale, in order to minimize interference and adapt the coverage to the latest shadowing effects of dominant obstacles in an industrial indoor environment. To fulfill this need, this paper formulates a transmit power control (TPC) model that enables both powering on/off APs and transmit power calibration of each AP that is powered on. This TPC model uses an empirical one-slope path loss model considering three-dimensional obstacle shadowing effects, to enable accurate yet simple coverage prediction. An efficient genetic algorithm (GA), named GATPC, is designed to solve this TPC model even on a large scale. To this end, it leverages repair mechanism-based population initialization, crossover and mutation, parallelism as well as dedicated speedup measures. The GATPC was experimentally validated in a small-scale IWLAN that is deployed a real industrial indoor environment. It was further numerically demonstrated and benchmarked on both small- and large-scales, regarding the effectiveness and the scalability of TPC. Moreover, sensitivity analysis was performed to reveal the produced interference and the qualification rate of GATPC in function of varying target coverage percentage as well as number and placement direction of dominant obstacles. (C) 2018 Elsevier B.V. All rights reserved
Optimal fault-tolerant placement of relay nodes in a mission critical wireless network
The operations of many critical infrastructures (e.g., airports) heavily depend on proper functioning of the radio communication network supporting operations. As a result, such a communication network is indeed a mission-critical communication network that needs adequate protection from external electromagnetic interferences. This is usually done through radiogoniometers. Basically, by using at least three suitably deployed radiogoniometers and a gateway gathering information from them, sources of electromagnetic emissions that are not supposed to be present in the monitored area can be localised. Typically, relay nodes are used to connect radiogoniometers to the gateway. As a result, some degree of fault-tolerance for the network of relay nodes is essential in order to offer a reliable monitoring. On the other hand, deployment of relay nodes is typically quite expensive. As a result, we have two conflicting requirements: minimise costs while guaranteeing a given fault-tolerance. In this paper address the problem of computing a deployment for relay nodes that minimises the relay node network cost while at the same time guaranteeing proper working of the network even when some of the relay nodes (up to a given maximum number) become faulty (fault-tolerance). We show that the above problem can be formulated as a Mixed Integer Linear Programming (MILP) as well as a Pseudo-Boolean Satisfiability (PB-SAT) optimisation problem and present experimental results com- paring the two approaches on realistic scenarios
- …