Estimating Epipolar Geometry With The Use of a Camera Mounted Orientation Sensor

Context: Image processing and computer vision are rapidly becoming more and more commonplace, and the amount of information about a scene, such as 3D geometry, that can be obtained from an image, or multiple images of the scene is steadily increasing due to increasing resolutions and availability of imaging sensors, and an active research community. In parallel, advances in hardware design and manufacturing are allowing for devices such as gyroscopes, accelerometers and magnetometers and GPS receivers to be included alongside imaging devices at a consumer level. Aims: This work aims to investigate the use of orientation sensors in the field of computer vision as sources of data to aid with image processing and the determination of a scene’s geometry, in particular, the epipolar geometry of a pair of images - and devises a hybrid methodology from two sets of previous works in order to exploit the information available from orientation sensors alongside data gathered from image processing techniques. Method: A readily available consumer-level orientation sensor was used alongside a digital camera to capture images of a set of scenes and record the orientation of the camera. The fundamental matrix of these pairs of images was calculated using a variety of techniques - both incorporating data from the orientation sensor and excluding its use Results: Some methodologies could not produce an acceptable result for the Fundamental Matrix on certain image pairs, however, a method described in the literature that used an orientation sensor always produced a result - however in cases where the hybrid or purely computer vision methods also produced a result - this was found to be the least accurate. Conclusion: Results from this work show that the use of an orientation sensor to capture information alongside an imaging device can be used to improve both the accuracy and reliability of calculations of the scene’s geometry - however noise from the orientation sensor can limit this accuracy and further research would be needed to determine the magnitude of this problem and methods of mitigation

2D Reconstruction of Small Intestine's Interior Wall

Examining and interpreting of a large number of wireless endoscopic images from the gastrointestinal tract is a tiresome task for physicians. A practical solution is to automatically construct a two dimensional representation of the gastrointestinal tract for easy inspection. However, little has been done on wireless endoscopic image stitching, let alone systematic investigation. The proposed new wireless endoscopic image stitching method consists of two main steps to improve the accuracy and efficiency of image registration. First, the keypoints are extracted by Principle Component Analysis and Scale Invariant Feature Transform (PCA-SIFT) algorithm and refined with Maximum Likelihood Estimation SAmple Consensus (MLESAC) outlier removal to find the most reliable keypoints. Second, the optimal transformation parameters obtained from first step are fed to the Normalised Mutual Information (NMI) algorithm as an initial solution. With modified Marquardt-Levenberg search strategy in a multiscale framework, the NMI can find the optimal transformation parameters in the shortest time. The proposed methodology has been tested on two different datasets - one with real wireless endoscopic images and another with images obtained from Micro-Ball (a new wireless cubic endoscopy system with six image sensors). The results have demonstrated the accuracy and robustness of the proposed methodology both visually and quantitatively.Comment: Journal draf

An empirical assessment of real-time progressive stereo reconstruction

3D reconstruction from images, the problem of reconstructing depth from images, is one of the most well-studied problems within computer vision. In part because it is academically interesting, but also because of the significant growth in the use of 3D models. This growth can be attributed to the development of augmented reality, 3D printing and indoor mapping. Progressive stereo reconstruction is the sequential application of stereo reconstructions to reconstruct a scene. To achieve a reliable progressive stereo reconstruction a combination of best practice algorithms needs to be used. The purpose of this research is to determine the combinat ion of best practice algorithms that lead to the most accurate and efficient progressive stereo reconstruction i.e the best practice combination. In order to obtain a similarity reconstruction the in t rinsic parameters of the camera need to be known. If they are not known they are determined by capturing ten images of a checkerboard with a known calibration pattern from different angles and using the moving plane algori thm. Thereafter in order to perform a near real-time reconstruction frames are acquired and reconstructed simultaneously. For the first pair of frames keypoints are detected and matched using a best practice keypoint detection and matching algorithm. The motion of the camera between the frames is then determined by decomposing the essential matrix which is determined from the fundamental matrix, which is determined using a best practice ego-motion estimation algorithm. Finally the keypoints are reconstructed using a best practice reconstruction algorithm. For sequential frames each frame is paired with t he previous frame and keypoints are therefore only detected in the sequential frame. They are detected , matched and reconstructed in the same fashion as the first pair of frames, however to ensure that the reconstructed points are in the same scale as the points reconstructed from the first pair of frames the motion of the camera between t he frames is estimated from 3D-2D correspondences using a best practice algorithm. If the purpose of progressive reconstruction is for visualization the best practice combination algorithm for keypoint detection was found to be Speeded Up Robust Features (SURF) as it results in more reconstructed points than Scale-Invariant Feature Transform (SIFT). SIFT is however more computationally efficient and thus better suited if the number of reconstructed points does not matter, for example if the purpose of progressive reconstruction is for camera tracking. For all purposes the best practice combination algorithm for matching was found to be optical flow as it is the most efficient and for ego-motion estimation the best practice combination algorithm was found to be the 5-point algorithm as it is robust to points located on planes. This research is significant as the effects of the key steps of progressive reconstruction and the choices made at each step on the accuracy and efficiency of the reconstruction as a whole have never been studied. As a result progressive stereo reconstruction can now be performed in near real-time on a mobile device without compromising the accuracy of reconstruction

Unsupervised Deep Epipolar Flow for Stationary or Dynamic Scenes

Unsupervised deep learning for optical flow computation has achieved promising results. Most existing deep-net based methods rely on image brightness consistency and local smoothness constraint to train the networks. Their performance degrades at regions where repetitive textures or occlusions occur. In this paper, we propose Deep Epipolar Flow, an unsupervised optical flow method which incorporates global geometric constraints into network learning. In particular, we investigate multiple ways of enforcing the epipolar constraint in flow estimation. To alleviate a "chicken-and-egg" type of problem encountered in dynamic scenes where multiple motions may be present, we propose a low-rank constraint as well as a union-of-subspaces constraint for training. Experimental results on various benchmarking datasets show that our method achieves competitive performance compared with supervised methods and outperforms state-of-the-art unsupervised deep-learning methods.Comment: CVPR 201

Software Porting of a 3D Reconstruction Algorithm to Razorcam Embedded System on Chip

A method is presented to calculate depth information for a UAV navigation system from Keypoints in two consecutive image frames using a monocular camera sensor as input and the OpenCV library. This method was first implemented in software and run on a general-purpose Intel CPU, then ported to the RazorCam Embedded Smart-Camera System and run on an ARM CPU onboard the Xilinx Zynq-7000. The results of performance and accuracy testing of the software implementation are then shown and analyzed, demonstrating a successful port of the software to the RazorCam embedded system on chip that could potentially be used onboard a UAV with tight constraints of size, weight, and power. The potential impacts will be seen through the continuation of this research in the Smart ES lab at University of Arkansas

Self-Calibration of Multi-Camera Systems for Vehicle Surround Sensing

Multi-camera systems are being deployed in a variety of vehicles and mobile robots today. To eliminate the need for cost and labor intensive maintenance and calibration, continuous self-calibration is highly desirable. In this book we present such an approach for self-calibration of multi-Camera systems for vehicle surround sensing. In an extensive evaluation we assess our algorithm quantitatively using real-world data

Advances in Stereo Vision

Stereopsis is a vision process whose geometrical foundation has been known for a long time, ever since the experiments by Wheatstone, in the 19th century. Nevertheless, its inner workings in biological organisms, as well as its emulation by computer systems, have proven elusive, and stereo vision remains a very active and challenging area of research nowadays. In this volume we have attempted to present a limited but relevant sample of the work being carried out in stereo vision, covering significant aspects both from the applied and from the theoretical standpoints