Measures of reconfigurability and its key characteristics in intelligent manufacturing systems

\In recent years, the fields of reconfigurable manufacturing systems, holonic manufacturing systems, and multi-agent systems have made technological advances to support the ready reconfiguration of automated manufacturing systems. While these technological advances have demonstrated robust operation and been qualitatively successful in achieving reconfigurability, limited effort has been devoted to the measurement of reconfigurability in the resultant systems. Hence, it is not clear (1) to which degree these designs have achieved their intended level of reconfigurability, (2) which systems are indeed quantitatively more reconfigurable and (3) how these designs may overcome their design limitations to achieve greater reconfigurability in subsequent design iterations. Recently, a reconfigurability measurement process based upon axiomatic design knowledge base and the design structure matrix has been developed. Together, they provide quantitative measures of reconfiguration potential and ease. This paper now builds upon these works to provide a set of composite reconfigurability measures. Among these are measures for the key characteristics of reconfigurability: integrability, convertibility, and customization, which have driven the qualitative and intuitive design of these technological advances. These measures are then demonstrated on an illustrative example followed by a discussion of how they adhere to requirements for reconfigurability measurement in automated and intelligent manufacturing systems

Architecting a System Model for Personalized Healthcare Delivery and Managed Individual Health Outcomes

In recent years, healthcare needs have shifted from treating acute conditions to meeting an unprecedented chronic disease burden. The healthcare delivery system has structurally evolved to address two primary features of acute care: the relatively short time period, on the order of a patient encounter, and the siloed focus on organs or organ systems, thereby operationally fragmenting and providing care by organ specialty. Much more so than acute conditions, chronic disease involves multiple health factors with complex interactions between them over a prolonged period of time necessitating a healthcare delivery model that is personalized to achieve individual health outcomes. Using the current acute-based healthcare delivery system to address and provide care to patients with chronic disease has led to significant complexity in the healthcare delivery system. This presents a formidable systems’ challenge where the state of the healthcare delivery system must be coordinated over many years or decades with the health state of each individual that seeks care for their chronic conditions. This paper architects a system model for personalized healthcare delivery and managed individual health outcomes. To ground the discussion, the work builds upon recent structural analysis of mass-customized production systems as an analogous system and then highlights the stochastic evolution of an individual’s health state as a key distinguishing feature

A Tensor-Based Formulation of Hetero-functional Graph Theory

Recently, hetero-functional graph theory (HFGT) has developed as a means to mathematically model the structure of large flexible engineering systems. In that regard, it intellectually resembles a fusion of network science and model-based systems engineering. With respect to the former, it relies on multiple graphs as data structures so as to support matrix-based quantitative analysis. In the meantime, HFGT explicitly embodies the heterogeneity of conceptual and ontological constructs found in model-based systems engineering including system form, system function, and system concept. At their foundation, these disparate conceptual constructs suggest multi-dimensional rather than two-dimensional relationships. This paper provides the first tensor-based treatment of some of the most important parts of hetero-functional graph theory. In particular, it addresses the "system concept", the hetero-functional adjacency matrix, and the hetero-functional incidence tensor. The tensor-based formulation described in this work makes a stronger tie between HFGT and its ontological foundations in MBSE. Finally, the tensor-based formulation facilitates an understanding of the relationships between HFGT and multi-layer networks

Rapid Control Prototyping for Reconfigurable Assembly Workstations

Department of System Design and Control EngineeringDiverse customer demands and rapid technology change have led to a paradigm shift in the manufacturing industry, from mass production to mass customization, and eventually to personalization. In the past, manufacturers have faced a challenge to produce a large volume of a product at low cost. Today, they should however produce a very small volume of a highly personalized product at mass production cost. In order to meet these challenges, rapid configuration or reconfiguration of manufacturing systems are crucial. Therefore, many studies have discussed reconfigurable manufacturing systems, emphasizing on dynamic scheduling and flexible shop floor logistics. However, little attention has given to the hardware control and the corresponding software development, although they are very important and time-consuming tasks for manufacturing system reconfiguration. Therefore, the main objective of this paper is to quickly design, test, and verify the control software both in a virtual and in a real environment. To do this, we propose a procedure of rapid control prototyping consisting of virtual factory construction, control software development and a final calibration procedure. Rapid control prototyping facilitates engineers to quickly develop control software including communication inputs and outputs, prior to constructing a real shop floor. The proposed simultaneous procedure of manufacturing system design and its control software development will significantly reduce the reconfiguration time of a manufacturing system.clos

Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Self-Evaluation Applied Mathematics 2003-2008 University of Twente

This report contains the self-study for the research assessment of the Department of Applied Mathematics (AM) of the Faculty of Electrical Engineering, Mathematics and Computer Science (EEMCS) at the University of Twente (UT). The report provides the information for the Research Assessment Committee for Applied Mathematics, dealing with mathematical sciences at the three universities of technology in the Netherlands. It describes the state of affairs pertaining to the period 1 January 2003 to 31 December 2008