A control architecture and human interface for agile, reconfigurable micro aerial vehicle formations

This thesis considers the problem of controlling a group of micro aerial vehicles for agile maneuvering cooperatively, or distributively. We first introduce the background and motivation for micro aerial vehicles, especially for the popular multi-rotor aerial vehicle platform. Then, we discuss the dynamics of quadrotor helicopters. A quadrotor is a specific kind of multi-rotor aerial vehicle with a special property called differential flatness, which simplifies the algorithm of trajectory planning, such that, instead of planning a trajectory in a 12-dimensional state space and 4-dimensional input space, we only need to plan the trajectory in 4-dimensional, so called, flat output space, while the 12-dimensional state and 4-dimensional input can be recovered from a mapping called endogenous transformation. We propose a series of approaches to achieve agile maneuvering of a dynamic quadrotor formation, from controlling a single quadrotor in an artificial vector field, to controlling a group of quadrotors in a Virtual Rigid Body (VRB) framework, to balancing the effect between the human control and autonomy for collision avoidance, and to fast on-line distributed collision avoidance with Buffered Voronoi Cells (BVC). In the vector field method, we generate velocity, acceleration, jerk and snap fields, depending on the tasks, or the positions of obstacles, such that a single quadrotor can easily find its required state and input from the endogenous transformation in order to track the artificial vector field. Next, with a Virtual Rigid Body framework, we let a group of quadrotors follow a single control command while also keeping a required formation, or even reconfigure from one formation to another. The Virtual Rigid Body framework decouples the trajectory planning problem into two sub-problems. Then we consider the problem of collision avoidance of the quadrotor formation when it is meanwhile tele-operated by a single human operator. The autonomy with collision avoidance algorithm, based on the vector field methods for a single quadrotor, is an assistive portion of the quadrotor formation controller, such that the human operator can focus on his/her high-level tasks, leaving the low-level collision avoidance task be handled automatically. We also consider the full autonomy problem of quadrotor formations when reconfiguring from one formation to another by developing a fast, on-line distributed collision avoidance algorithm using Buffered Voronoi Cells (BVCs). Our BVC based collision avoidance algorithm only requires sensed relative position, rather than relative position and velocity, while the computational complexity is comparable to other methods like velocity obstacles. At last, we introduce our experimental quadrotor platform which is built from PixHawk flight controller and Odroid-XU4 single-board computer. The hardware and software architecture of this multiple-quadrotor platform is described in detail so that our platform can easily be adopted and extended with different purposes. Our conclusion remark and discussion of future work are also given in this thesi

In-Flight Collision Avoidance Controller Based Only on OS4 Embedded Sensors

The major goal of this research was the development and implementation of a control system able to avoid collisions during the flight for a mini-quadrotor helicopter, based only on its embedded sensors without changing the environment. However, it is important to highlight that the design aspects must be seriously considered in order to overcome hardware limitations and achieve control simplification. The controllers of a UAV (Unmanned Aerial Vehicle) robot deal with highly unstable dynamics and strong axes coupling. Furthermore, any additional embedded sensor increases the robot total weight and therefore, decreases its operating time. The best balance between embedded electronics and robot operating time is desired. This paper focuses not only on the development and implementation of a collision avoidance controller for a mini-robotic helicopter using only its embedded sensors, but also on the mathematical model that was essential for the controller developing phases. Based on this model we carried out the development of a simulation tool based on MatLab/Simulink that was fundamental for setting the controllers' parameters. This tool allowed us to simulate and improve the OS4 controllers in different modeled environments and test different approaches. After that, the controllers were embedded in the real robot and the results proved to be very robust and feasible. In addition to this, the controller has the advantage of being compatible with future path planners that we are developing.Brazilian Agency: CAPES (Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior)Brazilian Agency: CNPq (National Council for Scientific and Technological Development

Autonomous Collision Avoidance for a Teleoperated UAV Based on a Super-Ellipsoidal Potential Function

This thesis presents the design of a super-ellipsoidal potential function (SEPF) that can be used, in a static and dynamic environment, for autonomous collision avoidance of an unmanned aerial vehicle (UAV) in a 3-dimensional space. In the design of the SEPF, we have the full control over the shape and size of the potential function. In our proposed approach, a teleoperated UAV can not only autonomously avoid collision with surrounding objects but also track the operator\u27 control input as closely as possible. As a result, an operator can always be in control of the UAV for his/her high-level guidance and navigation task without worrying too much about the UAV collision avoidance while it is being teleoperated. The effectiveness of the proposed approach is demonstrated through a human-in-the-loop simulation using virtual robot experimentation platform (v-rep) and Matlab programs and experimentation using a physical quadrotor UAV in a laboratory environment

Continuous Autonomous UAV Inspection for FPSO vessels

This Master's thesis represents the preliminary design study and proposes the unmanned aerial vehicle (UAV) -based inspection framework, comprising several multirotors with automatic charging and deployment for 24/7 integrity inspection tasks. This project has three main topics. First one describes the operational environment and existing regulations that cover use of UAVs. It forms the basis for proposal of the relevant use-case scenarios. Third part comprises two chapters, where design of concept and framework is being based on the previous factors. It shows that before implementation of fully autonomous inspection system, there is a need to cover both regulatory and technical gaps. It can be explained by the fact that there does not exist any autonomous inspection system today. Thus, this project can be seen as a base for future development of the UAV-based inspection system, as it focuses on creation of a general framework

Outdoor operations of multiple quadrotors in windy environment

Coordinated multiple small unmanned aerial vehicles (sUAVs) offer several advantages over a single sUAV platform. These advantages include improved task efficiency, reduced task completion time, improved fault tolerance, and higher task flexibility. However, their deployment in an outdoor environment is challenging due to the presence of wind gusts. The coordinated motion of a multi-sUAV system in the presence of wind disturbances is a challenging problem when considering collision avoidance (safety), scalability, and communication connectivity. Performing wind-agnostic motion planning for sUAVs may produce a sizeable cross-track error if the wind on the planned route leads to actuator saturation. In a multi-sUAV system, each sUAV has to locally counter the wind disturbance while maintaining the safety of the system. Such continuous manipulation of the control effort for multiple sUAVs under uncertain environmental conditions is computationally taxing and can lead to reduced efficiency and safety concerns. Additionally, modern day sUAV systems are susceptible to cyberattacks due to their use of commercial wireless communication infrastructure. This dissertation aims to address these multi-faceted challenges related to the operation of outdoor rotor-based multi-sUAV systems. A comprehensive review of four representative techniques to measure and estimate wind speed and direction using rotor-based sUAVs is discussed. After developing a clear understanding of the role wind gusts play in quadrotor motion, two decentralized motion planners for a multi-quadrotor system are implemented and experimentally evaluated in the presence of wind disturbances. The first planner is rooted in the reinforcement learning (RL) technique of state-action-reward-state-action (SARSA) to provide generalized path plans in the presence of wind disturbances. While this planner provides feasible trajectories for the quadrotors, it does not provide guarantees of collision avoidance. The second planner implements a receding horizon (RH) mixed-integer nonlinear programming (MINLP) model that is integrated with control barrier functions (CBFs) to guarantee collision-free transit of the multiple quadrotors in the presence of wind disturbances. Finally, a novel communication protocol using Ethereum blockchain-based smart contracts is presented to address the challenge of secure wireless communication. The U.S. sUAV market is expected to be worth $92 Billion by 2030. The Association for Unmanned Vehicle Systems International (AUVSI) noted in its seminal economic report that UAVs would be responsible for creating 100,000 jobs by 2025 in the U.S. The rapid proliferation of drone technology in various applications has led to an increasing need for professionals skilled in sUAV piloting, designing, fabricating, repairing, and programming. Engineering educators have recognized this demand for certified sUAV professionals. This dissertation aims to address this growing sUAV-market need by evaluating two active learning-based instructional approaches designed for undergraduate sUAV education. The two approaches leverages the interactive-constructive-active-passive (ICAP) framework of engagement and explores the use of Competition based Learning (CBL) and Project based Learning (PBL). The CBL approach is implemented through a drone building and piloting competition that featured 97 students from undergraduate and graduate programs at NJIT. The competition focused on 1) drone assembly, testing, and validation using commercial off-the-shelf (COTS) parts, 2) simulation of drone flight missions, and 3) manual and semi-autonomous drone piloting were implemented. The effective student learning experience from this competition served as the basis of a new undergraduate course on drone science fundamentals at NJIT. This undergraduate course focused on the three foundational pillars of drone careers: 1) drone programming using Python, 2) designing and fabricating drones using Computer-Aided Design (CAD) and rapid prototyping, and 3) the US Federal Aviation Administration (FAA) Part 107 Commercial small Unmanned Aerial Vehicles (sUAVs) pilot test. Multiple assessment methods are applied to examine the students’ gains in sUAV skills and knowledge and student attitudes towards an active learning-based approach for sUAV education. The use of active learning techniques to address these challenges lead to meaningful student engagement and positive gains in the learning outcomes as indicated by quantitative and qualitative assessments

Automatic control of a multirotor

Objective of this thesis is to describe the design and realisation phases of a multirotor to be used for low risk and cost aerial observation. Starting point of this activity was a wide literature study related to the technological evolution of multirotors design and to the state of the art. Firstly the most common multirotor configurations were defined and, according to a size and performance based evaluation, the most suitable one was chosen. A detailed computer aided design model was drawn as basis for the realisation of two prototypes. The realised multirotors were “X-shaped” octorotors with eight coaxially coupled motors. The mathematical model of the multirotor dynamics was studied. “Proportional Integral Derivative” and “Linear Quadratic” algorithms were chosen as techniques to regulate the attitude dynamics of the multirotor. These methods were tested with a nonlinear model simulation developed in the Matlab Simulink environment. In the meanwhile the Arduino board was selected as the best compromise between costs and performance and the above mentioned algorithms were implemented using this platform thanks to its main characteristic of being completely “open source”. Indeed the multirotor was conceived to be a serviceable tool for the public utility and, at the same time, to be an accessible device for research and studies. The behaviour of the physical multirotor was evaluated with a test bench designed to isolate the rotation about one single body axis at a time. The data of the experimental tests were gathered in real time using a custom Matlab code and several indoor tests allowed the “fine tuning” of the controllers gains. Afterwards a portable “ground station” was conceived and realised in adherence with the real scenarios users needs. Several outdoor experimental flights were executed with successful results and the data gathered during the outdoor tests were used to evaluate some key performance indicators as the endurance and the maximum allowable payload mass. Then the fault tolerance of the control system was evaluated simulating and experimenting the loss of one motor; even in this critical condition the system exhibited an acceptable behaviour. The reached project readiness allowed to meet some potential users as the “Turin Fire Department” and to cooperate with them in a simulated emergency. During this event the multirotor was used to gather and transmit real time aerial images for an improved “situation awareness”. Finally the study was extended to more innovative control techniques like the neural networks based ones. Simulations results demonstrated their effectiveness; nevertheless the inherent complexity and the unreliability outside the training ranges could have a catastrophic impact on the airworthiness. This is a factor that cannot be neglected especially in the applications related to flying platforms. Summarising, this research work was addressed mainly to the operating procedures for implementing automatic control algorithms to real platforms. All the design aspects, from the preliminary multirotor configuration choice to the tests in possible real scenarios, were covered obtaining performances comparable with other commercial of-the-shelf platforms

Fundamental Elements of Drone Management Systems in Air Traffic Planning

Drones or Unmanned Aerial Systems (UAV – Unmanned Aerial Vehicles or UAS – UnmannedAerial Systems) are vehicles that can fly without the need for a pilot or passengers. Drones can be controlled remotely through radio waves or independently (with a previously determined route). The amount of documented accidents involving the hazardous use of drones has risensignificantly due to the increased usage of drones. To perform and increase the use of drones in air traffic management (ATM), especially in smart city planning, a variety of regulations andmanagement procedures will be implemented. This paper aims to propose management rules or regulations for drones in smart city transportation management and some approaches related to drone management and drone control. To present controlling approaches through the parameters in mathematical modelling for drones, we need a control rule, data gathering from the surroundings (usage of GIS), and a dynamic model of drones, and to present controlling and managing it with the help of a drone-following model based on a dynamic model of drones

Onboard Robust Nonlinear Control for Multiple Multirotor UAVs

In this thesis, we focus on developing and validating onboard robust nonlinear control approaches for multiple multirotor unmanned aerial vehicles (UAVs), for the promise of achieving nontrivial tasks, such as path following with aggressive maneuvers, navigation in complex environments with obstacles, and formation in group. To fulfill these challenging missions, the first concern comes with the stability of flight control for the aggressive UAV maneuvers with large tilted angles. In addition, robustness of control is highly desired in order to lead the multirotor UAVs to safe and accurate performance under disturbances. Furthermore, efficiency of control algorithm is a crucial element for the onboard implementation with limited computational capability. Finally, the potential to simultaneously control a group of UAVs in a stable fashion is required. All of these concerns motivate our work in this thesis in the following aspects. We first propose the problem of robust control for the nontrivial maneuvers of a multirotor UAV under disturbances. A complete framework is developed to enable the UAV to achieve the challenging tasks, which consists of a nonlinear attitude controller based on the solution of global output regulation problems for the rigid body rotations SO(3), a backstepping-like position controller, a six-dimensional (6D) wrench observer to estimate the unknown force and torque disturbances, and an online trajectory planner based on a model predictive control (MPC) method. We prove the strong convergence properties of the proposed method both in theory and via intensive real-robot experiments of aggressive waypoint navigation and large-tilted path following tasks in the presence of external disturbances, e.g. wind gusts. Secondly, we propose the problem of autonomous navigation of a multirotor UAV in complex scenarios. We present an effective and robust control approach, namely a fast MPC method with the inclusion of nonlinear obstacle avoiding constraints, and implement it onboard the UAV at 50Hz. The developed approach enables the navigation for a multirotor UAV in 3D environments with multiple obstacles, by autonomously deciding to fly over or around the randomly located obstacles. The third problem that is addressed in our work is formation control for a group of multirotor UAVs. We solve this problem by proposing a distributed formation control algorithm for multiple UAVs based on the solution of retraction balancing problem. The algorithm brings the whole group of UAVs simultaneously to a prescribed submanifold that determines the formation shape in an asymptotically stable fashion in 2D and 3D environments. We validate our proposed algorithm via a series of hardware-in-the-loop simulations and real-robot experiments in various formation cases of arbitrary time-varying (e.g. expanding, shrinking or moving) shapes. In the actual experiments, up to 4 multirotors have been implemented to form arbitrary triangular, rectangular and circular shapes drawn by the operator via a human-robot-interaction device. We have also carried out virtual tests using up to 6 onboard computers to achieve a spherical formation and a formation moving through obstacles.In dieser Arbeit konzentrieren wir uns auf die Entwicklung und Validierung von robusten nichtlinearen On-Bord Steuerungsansatzen für mehrere unbemannte Multirotor-Luftfahrzeuge (UAVs), mit dem Ziel, nicht triviale Aufgaben zu erledigen wie z.B. Wegfolge mit aggressiven Manovern, Navigation in komplexen Umgebungen mit Hindernissen und Formationsflug in einer Gruppe. Um diese anspruchsvollen Missionen zu erfullen liegt unser Hauptaugenmerk bei der Stabilität der Flugsteuerung für aggressive UAV Manöver mit steilen Lagewinkeln. Des weiteren ist Kontroll-robustheit sehr wünschenswert, um die Multirotor-UAVs unter Beeinflussung sicher und genau zu steuern. Daruber hinaus ist die Effizienz des Kontrollalgorithmus ein wichtiges Element für die Onboard-Implementierung mit eingeschrankter Rechenfähigkeit. Abschliessend ist das Potenzial, gleichzeitig eine Gruppe von UAVs in stabiler Weise zu kontrollieren, erforderlich. All dies motiviert uns zur Arbeit an den folgenden Aspekten: Zuerst behandeln wir das Problem der robusten Steuerung nichttrivialer Manöver eines Multirotor UAV unter Störeinfluss. Ein komplettes Framework wird entwickelt, welches dem UAV ermöglicht diese anspruchsvollen Aufgaben zu bewältigen. Es beinhaltet einem nichtlinearen Lageregler, basierend auf der Lösung von globalen Ausgangsrege lungsproblemen für Starrkörperrotationen SO(3), einem backstepping basierten Positionsregler, einen sechsdimensionalen (6D) wrench observer um die unbekannten Kraftund Drehmomenteinflusse zu schätzen, sowie einem Online-Trajektorienplaner basierend auf Model Predictive Control (MPC). Wir weisen die starken Konvergenzcharakteristiken der vorgeschlagenen Methode nach, sowohl in der Theorie als auchmittels intensiver Real-roboter-Experimente, mit aggressiver Wegpunktnavigation und Wegfindungsaufgaben in extremer Fluglage in Gegenwart externer Einflüsse, z.B. Windböen. Als nächstes bearbeiten wir das Problem der autonomen Navigation eines Multirotor UAV in komplexen Szenarien. Wir stellen einen effektiven und robusten Steuerungsansatz dar, nämlich eine schnelle MPC-Methode mit der Einbeziehung von nichtlinearer Einschränkungen zur Hindernisvermeidung, und implmenetieren diese an Bord des UAV mit 50Hz. Der entwickelte Ansatz ermöglicht die Navigation eines Multirotor UAVs in 3D-Umgebungen mit mehreren Hindernissen, wobei autonom entschieden wir, über oder um die zufällig gelegenen Hindernisse zu fliegen. Das dritte Problem, das in unserer Arbeit angesprochen wird, ist die Bildungssteuerung für eine Gruppe von Multirotor UAVs. Wir lösen dieses Problem, indem wir einen verteilten Formationskontrollalgorithmus für mehrere UAVs auf der Grundlage der Lösung des Retraction Balancing Problems vorschlagen. Der Algorithmus bringt die ganze Gruppe von UAVs gleichzeitig auf eine vorgeschriebene Untermanigfaltigkeit, welche die Formation in asymtotisch stabiler Weise in 2D- und 3D-Umgebungen bestimmt. Wir validieren unseren vorgeschlagenen Algorithmus uber eine Reihe von Hardware-in-the- ¨ Loop-Simulationen und Real-Roboter-Experimente mit verschiedenen Formationsvarianten in beliebigen zeitveränderlichen (z. B. expandierenden, schrumpfenden oder bewegten) Formen. In den eigentlichen Experimenten wurden bis zu 4 Multirotoren eingesetzt, um beliebige dreieckige, rechteckige und kreisförmige Formen zu bilden, die vom Bediener über eine Mensch-Roboter-Interaktionsvorrichtung vorgezeichnet wurden. Wir haben auch virtuelle Tests mit bis zu 6 Onboard-Computern durchgeführt, um eine sphärische Formation und eine Formation zu erreichen, die sich durch Hindernisse. bewegt