33 research outputs found

    Critical dimension control influencing factors and measurement

    Get PDF

    Product assurance technology for procuring reliable, radiation-hard, custom LSI/VLSI electronics

    Get PDF
    Advanced measurement methods using microelectronic test chips are described. These chips are intended to be used in acquiring the data needed to qualify Application Specific Integrated Circuits (ASIC's) for space use. Efforts were focused on developing the technology for obtaining custom IC's from CMOS/bulk silicon foundries. A series of test chips were developed: a parametric test strip, a fault chip, a set of reliability chips, and the CRRES (Combined Release and Radiation Effects Satellite) chip, a test circuit for monitoring space radiation effects. The technical accomplishments of the effort include: (1) development of a fault chip that contains a set of test structures used to evaluate the density of various process-induced defects; (2) development of new test structures and testing techniques for measuring gate-oxide capacitance, gate-overlap capacitance, and propagation delay; (3) development of a set of reliability chips that are used to evaluate failure mechanisms in CMOS/bulk: interconnect and contact electromigration and time-dependent dielectric breakdown; (4) development of MOSFET parameter extraction procedures for evaluating subthreshold characteristics; (5) evaluation of test chips and test strips on the second CRRES wafer run; (6) two dedicated fabrication runs for the CRRES chip flight parts; and (7) publication of two papers: one on the split-cross bridge resistor and another on asymmetrical SRAM (static random access memory) cells for single-event upset analysis

    Edge effects in silicon IGFETs.

    Get PDF

    Yield improvement of VLSI layout using local design rules

    Get PDF

    A test structure for the measurement and characterization of layout-induced transistor variation

    Get PDF
    Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student-submitted PDF version of thesis.Includes bibliographical references (p. 131-139).Transistor scaling has enabled us to design circuits with higher performance, lower cost, and higher density; billions of transistors can now be integrated onto a single die. However, this trend also magnifies the significance of device variability. In this thesis, we focus on the study of layout-induced systematic variation. Specifically, we investigate how pattern densities can affect transistor behavior. Two pattern densities are chosen in our design: polysilicon density and shallow-trench isolation (STI) density. A test structure is designed to study the systematic spatial dependency between transistors in order to determine the impact of different variation sources on transistor characteristics and understand the radius of influence that defines the neighborhood of shapes which play a part in determining the transistor characteristics. A more accurate transistor model based on surrounding layout details can be built using these results. The test structure is divided into six blocks, each having a different polysilicon density or STI density. A rapid change of pattern density between blocks is designed to emulate a step response for future modeling. The two pattern densities are chosen to reflect the introduction of new process technologies, such as strain engineering and rapid thermal annealing. The test structure is designed to have more than 260K devices under test (DUT). In addition to the changes in pattern density, the impact of transistor sizing, number of polysilicon fingers, finger spacing, and active area are also explored and studied in this thesis. Two different test circuits are designed to perform the measurement.(cont.) The first test circuit is designed to work with of-chip wafer probe testing equipment; the second test circuit is designed to have on-chip current measurement capabilities using a high dynamic range analog-to-digital converter (ADC). The ADC has a dynamic range of over four orders of magnitude to measure currents from 50nA to 1mA. The test chip also implements a hierarchical design with a minimum amount of peripheral circuitry, so that most of the chip area is dedicated for the transistors under test.by Albert Hsu Ting Chang.S.M

    Custom VLSI circuits for high energy physics

    Full text link

    Mechatronic Systems

    Get PDF
    Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools

    Miniaturized Transistors, Volume II

    Get PDF
    In this book, we aim to address the ever-advancing progress in microelectronic device scaling. Complementary Metal-Oxide-Semiconductor (CMOS) devices continue to endure miniaturization, irrespective of the seeming physical limitations, helped by advancing fabrication techniques. We observe that miniaturization does not always refer to the latest technology node for digital transistors. Rather, by applying novel materials and device geometries, a significant reduction in the size of microelectronic devices for a broad set of applications can be achieved. The achievements made in the scaling of devices for applications beyond digital logic (e.g., high power, optoelectronics, and sensors) are taking the forefront in microelectronic miniaturization. Furthermore, all these achievements are assisted by improvements in the simulation and modeling of the involved materials and device structures. In particular, process and device technology computer-aided design (TCAD) has become indispensable in the design cycle of novel devices and technologies. It is our sincere hope that the results provided in this Special Issue prove useful to scientists and engineers who find themselves at the forefront of this rapidly evolving and broadening field. Now, more than ever, it is essential to look for solutions to find the next disrupting technologies which will allow for transistor miniaturization well beyond silicon’s physical limits and the current state-of-the-art. This requires a broad attack, including studies of novel and innovative designs as well as emerging materials which are becoming more application-specific than ever before
    corecore