Workshop proceedings of the 1st workshop on quality in modeling

Quality assessment and assurance constitute an important part of software engineering. The issues of software quality management are widely researched and approached from multiple perspectives and viewpoints. The introduction of a new paradigm in software development – namely Model Driven Development (MDD) and its variations (e.g., MDA [Model Driven Architecture], MDE [Model Driven Engineering], MBD [Model Based Development], MIC [Model Integrated Computing]) – raises new challenges in software quality management, and as such should be given a special attention. In particular, the issues of early quality assessment, based on models at a high abstraction level, and building (or customizing the existing) prediction models for software quality based on model metrics are of central importance for the software engineering community. The workshop is continuation of a series of workshops on consistency that have taken place during the subsequent annual UML conferences and recently MDA-FA. The idea behind this workshop is to extend the scope of interests and address a wide spectrum of problems related to MDD. It is also in line with the overall initiative of the shift from UML to MoDELS. The goal of this workshop is to gather researchers and practitioners interested in the emerging issues of quality in the context of MDD. The workshop is intended to provide a premier forum for discussions related to software quality and MDD. And the aims of the workshop are: - Presenting ongoing research related to quality in modeling in the context of MDD, - Defining and organizing issues related to quality in the MDD. The format of the workshop consists of two parts: presentation and discussion. The presentation part is aimed at reporting research results related to quality aspects in modeling. Seven papers were selected for the presentation out of 16 submissions; the selected papers are included in these proceedings. The discussion part is intended to be a forum for exchange of ideas related to understanding of quality and approaching it in a systematic way

Workshop proceedings of the 1st workshop on quality in modeling

Quality assessment and assurance constitute an important part of software engineering. The issues of software quality management are widely researched and approached from multiple perspectives and viewpoints. The introduction of a new paradigm in software development – namely Model Driven Development (MDD) and its variations (e.g., MDA [Model Driven Architecture], MDE [Model Driven Engineering], MBD [Model Based Development], MIC [Model Integrated Computing]) – raises new challenges in software quality management, and as such should be given a special attention. In particular, the issues of early quality assessment, based on models at a high abstraction level, and building (or customizing the existing) prediction models for software quality based on model metrics are of central importance for the software engineering community. The workshop is continuation of a series of workshops on consistency that have taken place during the subsequent annual UML conferences and recently MDA-FA. The idea behind this workshop is to extend the scope of interests and address a wide spectrum of problems related to MDD. It is also in line with the overall initiative of the shift from UML to MoDELS. The goal of this workshop is to gather researchers and practitioners interested in the emerging issues of quality in the context of MDD. The workshop is intended to provide a premier forum for discussions related to software quality and MDD. And the aims of the workshop are: - Presenting ongoing research related to quality in modeling in the context of MDD, - Defining and organizing issues related to quality in the MDD. The format of the workshop consists of two parts: presentation and discussion. The presentation part is aimed at reporting research results related to quality aspects in modeling. Seven papers were selected for the presentation out of 16 submissions; the selected papers are included in these proceedings. The discussion part is intended to be a forum for exchange of ideas related to understanding of quality and approaching it in a systematic way

Ultra-High Capacity Silicon Photonic Interconnects through Spatial Multiplexing

The market for higher data rate communication is driving the semiconductor industry to develop new techniques of writing at smaller scales, while continuing to scale bandwidth at low power consumption. The question arises of how to continue to sustain this trend. Silicon photonic (SiPh) devices offer a potential solution to the electronic interconnect bandwidth bottleneck. SiPh leverages the technology commensurate of decades of fabrication development with the unique functionality of next-generation optical interconnects. Finer fabrication techniques have allowed for manufacturing physical characteristics of waveguide structures that can support multiple modes in a single waveguide. By refining modal characteristics in photonic waveguide structures, through mode multiplexing with the asymmetric y-junction and microring resonator, higher aggregate data bandwidth is demonstrated via various combinations of spatial multiplexing, broadening applications supported by the integrated platform. The main contributions of this dissertation are summarized as follows. Experimental demonstrations of new forms of spatial multiplexing combined together exhibit feasibility of data transmission through mode-division multiplexing (MDM), mode-division and wavelength-division multiplexing (MDM-WDM), and mode-division and polarization-division multiplexing (MDM-PDM) through a C-band, Si photonic platform. Error-free operation through mode multiplexers and demultiplexers show how data can be viably scaled on multiple modes and with existing spatial domains simultaneously. This work opens up new avenues for scaling bandwidth capacity through leveraging orthogonal domains available on-chip, beyond what had previously been employed like WDM and time-division multiplexing (TDM). Furthermore, we explore expanding device channel support from two to three arms. Finding that a slight mismatch in the third arm can increase crosstalk contributions considerably, especially when increasing data rate, we explore a methodical way to design the asymmetric y-junction device by considering its angles and multiplexer/demultiplexer arm width. By taking into consideration device fabrication variations, we turn towards optimizing device performance post-fabrication. Through ModePROP simulations, optimizing device performance dynamically post-fabrication is analyzed, through either electro-optical or thermo-optical means. By biasing the arm introducing the slight spectral offset, we can quantifiably improve device performance. Scaling bandwidth is experimentally demonstrated through the device at 3 modes, 2 wavelengths, and 40 Gb/s data rate for 240 Gb/s aggregate bandwidth, with the potential to reduce power penalty per the device optimization process we described. A main motivation for this on-chip spatial multiplexing is the need to reduce costs. As the laser source serves as the greatest power consumer in an optical system, mode-division multiplexing and other forms of spatial multiplexing can be implemented to push its potentially prohibitive cost metrics down. While the device introduces loss, through imperfect mode isolation, as device fabrication improves, tolerance can increase as well. Meanwhile, the rate that laser power consumption increases as supported wavelengths scales is shown to be much faster than the loss introduced by scaling on-chip bandwidth multi-modally. Future generations of ultra-high capacity devices through spatial multiplexing is explored. Already various systems can be implemented multimodally, with the design features serving as useful for other components. Central to photonic network-on-chips, a multimodal switch fabric, composed of microring resonators, is demonstrated to have error-free operation of 1x2 switching of 10 Gb/s data. These contributions aim to scale bandwidth to ultra-high capacity, while ameliorating any imperfect design, through multiple routes conjoined with on-chip spatial multiplexing, and they constitute the bulk of this dissertation. For the latter part, we turn to the issue of integrating a photonic device for dynamic power reallocation in a system. Specifically, we utilize a 4x4 nonblocking switch fabric composed of Mach-Zehnder interferometers that switch both electro-optically and thermo-optically at ns and μs rates respectively. In order to demonstrate an intelligent platform capable of dynamically multicasting data and reallocating power as needed by the system, we must first initialize the switch fabric to control with an electronic interface. A dithering mechanism, whereby exact cross, bar, and sub-percentage states are enforced through the device, is described here. Such a method could be employed for actuating the device table of bias values to states automatically. We then employ a dynamic power reallocation algorithm through a data acquisition unit, showing real-time channel recovery for channels experiencing power loss by diverting power from paths that could tolerate it. The data that is being multicast through the system is experimentally shown to be error-free at 40 Gb/s data rate, when transmitting from one to three clients and going from automatic bar/cross states to equalized power distribution. For the last portion of this topic, the switch fabric was inserted into a high-performance computing system. In order to run benchmarks at 10 Gb/s data ontop of the switch fabric, a newer model of the control plane was implemented to toggle states according to the command issued by the server. Such a programmable mechanism will prove necessary in future implementations of optical subsystems embedded inside larger systems, like data centers. Beyond the specific control plane demonstrated, the idea of an intelligent photonic layer can be applied to alleviate many kinds of optical channel abnormalities or accommodate for switching based on different patterns in data transmission. Besides spatial-multiplexing, expanding on-chip bandwidth can be accomplished by extension of the wavelength detection regime to a longer regime. Experimental demonstration of photodetection at 1.9 μm is shown with Si+-doped Si photodetectors at 1 Gb/s data operation featuring responsivities of .03 AW−1 at 5 V bias. The same way of processing these Si ribbed waveguide photodetectors can garner even longer wavelength operation at 2.2 μm wavelength. Finally, the experimental demonstration of a coherent perfect absorption Si modulator is exhibited, showing a viable extinction ratio of 24.5 dB. Using this coherent perfect absorption mechanism to demodulate signals, there is the added benefit of differential reception. Currently, an automated process for data collection is employed at a faster time scale than instabilities present in fibers in the setup with future implementations eliminating the off-chip phase modulator for greater signal stability. The field of SiPh has developed to a stage where specific application domains can take off and compete according to industrial-level standards. The work in this dissertation contributes to experimental demonstration of a newly developing area of mode-division multiplexing for substantially increasing bandwidth on-chip. While implementing the discussed photonic devices in dynamic systems, various attributes of integrated photonics are leveraged with existing electronic technologies. Future generations of computing systems should then be designed by implementing both system and device level considerations

Proceedings of the Fifth International Mobile Satellite Conference 1997

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments

Environmental Health

Environmental health practitioners worldwide are frequently presented with issues that require further investigating and acting upon so that exposed populations can be protected from ill-health consequences. These environmental factors can be broadly classified according to their relation to air, water or food contamination. However, there are also work-related, occupational health exposures that need to be considered as a subset of this dynamic academic field. This book presents a review of the current practice and emerging research in the three broadly defined domains, but also provides reference for new emerging technologies, health effects associated with particular exposures and environmental justice issues. The contributing authors themselves display a range of backgrounds and they present a developing as well as a developed world perspective. This book will assist environmental health professionals to develop best practice protocols for monitoring a range of environmental exposure scenarios

The Fifteenth Marcel Grossmann Meeting

The three volumes of the proceedings of MG15 give a broad view of all aspects of gravitational physics and astrophysics, from mathematical issues to recent observations and experiments. The scientific program of the meeting included 40 morning plenary talks over 6 days, 5 evening popular talks and nearly 100 parallel sessions on 71 topics spread over 4 afternoons. These proceedings are a representative sample of the very many oral and poster presentations made at the meeting.Part A contains plenary and review articles and the contributions from some parallel sessions, while Parts B and C consist of those from the remaining parallel sessions. The contents range from the mathematical foundations of classical and quantum gravitational theories including recent developments in string theory, to precision tests of general relativity including progress towards the detection of gravitational waves, and from supernova cosmology to relativistic astrophysics, including topics such as gamma ray bursts, black hole physics both in our galaxy and in active galactic nuclei in other galaxies, and neutron star, pulsar and white dwarf astrophysics. Parallel sessions touch on dark matter, neutrinos, X-ray sources, astrophysical black holes, neutron stars, white dwarfs, binary systems, radiative transfer, accretion disks, quasars, gamma ray bursts, supernovas, alternative gravitational theories, perturbations of collapsed objects, analog models, black hole thermodynamics, numerical relativity, gravitational lensing, large scale structure, observational cosmology, early universe models and cosmic microwave background anisotropies, inhomogeneous cosmology, inflation, global structure, singularities, chaos, Einstein-Maxwell systems, wormholes, exact solutions of Einstein's equations, gravitational waves, gravitational wave detectors and data analysis, precision gravitational measurements, quantum gravity and loop quantum gravity, quantum cosmology, strings and branes, self-gravitating systems, gamma ray astronomy, cosmic rays and the history of general relativity

The Fifteenth Marcel Grossmann Meeting

The three volumes of the proceedings of MG15 give a broad view of all aspects of gravitational physics and astrophysics, from mathematical issues to recent observations and experiments. The scientific program of the meeting included 40 morning plenary talks over 6 days, 5 evening popular talks and nearly 100 parallel sessions on 71 topics spread over 4 afternoons. These proceedings are a representative sample of the very many oral and poster presentations made at the meeting.Part A contains plenary and review articles and the contributions from some parallel sessions, while Parts B and C consist of those from the remaining parallel sessions. The contents range from the mathematical foundations of classical and quantum gravitational theories including recent developments in string theory, to precision tests of general relativity including progress towards the detection of gravitational waves, and from supernova cosmology to relativistic astrophysics, including topics such as gamma ray bursts, black hole physics both in our galaxy and in active galactic nuclei in other galaxies, and neutron star, pulsar and white dwarf astrophysics. Parallel sessions touch on dark matter, neutrinos, X-ray sources, astrophysical black holes, neutron stars, white dwarfs, binary systems, radiative transfer, accretion disks, quasars, gamma ray bursts, supernovas, alternative gravitational theories, perturbations of collapsed objects, analog models, black hole thermodynamics, numerical relativity, gravitational lensing, large scale structure, observational cosmology, early universe models and cosmic microwave background anisotropies, inhomogeneous cosmology, inflation, global structure, singularities, chaos, Einstein-Maxwell systems, wormholes, exact solutions of Einstein's equations, gravitational waves, gravitational wave detectors and data analysis, precision gravitational measurements, quantum gravity and loop quantum gravity, quantum cosmology, strings and branes, self-gravitating systems, gamma ray astronomy, cosmic rays and the history of general relativity