Fully Integrated Biochip Platforms for Advanced Healthcare

Recent advances in microelectronics and biosensors are enabling developments of innovative biochips for advanced healthcare by providing fully integrated platforms for continuous monitoring of a large set of human disease biomarkers. Continuous monitoring of several human metabolites can be addressed by using fully integrated and minimally invasive devices located in the sub-cutis, typically in the peritoneal region. This extends the techniques of continuous monitoring of glucose currently being pursued with diabetic patients. However, several issues have to be considered in order to succeed in developing fully integrated and minimally invasive implantable devices. These innovative devices require a high-degree of integration, minimal invasive surgery, long-term biocompatibility, security and privacy in data transmission, high reliability, high reproducibility, high specificity, low detection limit and high sensitivity. Recent advances in the field have already proposed possible solutions for several of these issues. The aim of the present paper is to present a broad spectrum of recent results and to propose future directions of development in order to obtain fully implantable systems for the continuous monitoring of the human metabolism in advanced healthcare applications

Review—Lab-in-a-Mouth and Advanced Point-of-Care Sensing Systems: Detecting Bioinformation from the Oral Cavity and Saliva

Cavitas sensors and point-of-need sensors capable of providing physical and biochemical information from the oral cavity and saliva have attracted great attention because they offer remarkable advantages for noninvasive sensing systems. Herein, we introduce the basic anatomy and physiology of important body cavities to understand their characteristics as it is a pivotal foundation for the successful development of in-mouth devices. Next, the advanced development in lab-in-a-mouth sensors and point-of-need sensors for analyzing saliva are explained. In addition, we discuss the integrations of artificial intelligence and electronic technologies in smart sensing networks for healthcare systems. This review ends with a discussion of the challenges, future research trends, and opportunities in relevant disciplines. Mouthguard-based sensors and conventional salivary sensing devices will continue to be significant for the progress in the next-generation sensing technologies and smart healthcare systems.ope

Surface Engineering of Nanomaterials with Polymers, Biomolecules, and Small Ligands for Nanomedicine

Nanomedicine is a speedily growing area of medical research that is focused on developing nanomaterials for the prevention, diagnosis, and treatment of diseases. Nanomaterials with unique physicochemical properties have recently attracted a lot of attention since they offer a lot of potential in biomedical research. Novel generations of engineered nanostructures, also known as designed and functionalized nanomaterials, have opened up new possibilities in the applications of biomedical approaches such as biological imaging, biomolecular sensing, medical devices, drug delivery, and therapy. Polymers, natural biomolecules, or synthetic ligands can interact physically or chemically with nanomaterials to functionalize them for targeted uses. This paper reviews current research in nanotechnology, with a focus on nanomaterial functionalization for medical applications. Firstly, a brief overview of the different types of nanomaterials and the strategies for their surface functionalization is offered. Secondly, different types of functionalized nanomaterials are reviewed. Then, their potential cytotoxicity and cost-effectiveness are discussed. Finally, their use in diverse fields is examined in detail, including cancer treatment, tissue engineering, drug/gene delivery, and medical implants

Implantable Piezoresistive Microcantilever-based Wireless Cocaine Biosensors

Cocaine is a well-known, illegal, recreational drug that is addictive due to its effects on the mesolimbic reward pathway in the human body. Accurate and real-time measurement of the concentration of cocaine in the body as a function of time and physiological factors is a key requirement for the understanding of the use of this drug. Current methods for such measurements involve taking samples from the human body (such as blood, urine, and hair) and performing analytical chemistry tests on these samples. This techniques are relatively expensive, time consuming, and labor intensive. To address this issue, a new implantable sensor for the automated detection and measurement of the relative cocaine concentration is presented here. The device is more economical and provides for higher sampling frequencies than the current methods. The active sensor elements consist of piezoresistive microcantilever arrays, which are coated with an oligonucleotide-based aptamer, i.e. a short sequence of RNA with high affinity for specific target molecules, as the cocaine receptor. A Wheatstone bridge is used to convert the biosensor signal into an electronic signal. This signal is transmitted wireless at an operating frequency of 403.55 MHz, which complies with the US Medical Implant Communication System (MICS) FCC 47CFR Part 95. The limit of detection for the in vitro experiment is found to be 1 ng/ml. The device has successfully measured the relative concentration of cocaine upon implantation in the subcutaneous interstitial fluid of male Wistar rats

Spatial and spatiotemporal variation in metapopulation structure affects population dynamics in a passively dispersing arthropod

The spatial and temporal variation in the availability of suitable habitat within metapopulations determines colonization-extinction events, regulates local population sizes and eventually affects local population and metapopulation stability. Insights into the impact of such a spatiotemporal variation on the local population and metapopulation dynamics are principally derived from classical metapopulation theory and have not been experimentally validated. By manipulating spatial structure in artificial metapopulations of the spider mite Tetranychus urticae, we test to which degree spatial (mainland-island metapopulations) and spatiotemporal variation (classical metapopulations) in habitat availability affects the dynamics of the metapopulations relative to systems where habitat is constantly available in time and space (patchy metapopulations). Our experiment demonstrates that (i) spatial variation in habitat availability decreases variance in metapopulation size and decreases density-dependent dispersal at the metapopulation level, while (ii) spatiotemporal variation in habitat availability increases patch extinction rates, decreases local population and metapopulation sizes and decreases density dependence in population growth rates. We found dispersal to be negatively density dependent and overall low in the spatial variable mainland-island metapopulation. This demographic variation subsequently impacts local and regional population dynamics and determines patterns of metapopulation stability. Both local and metapopulation-level variabilities are minimized in mainland-island metapopulations relative to classical and patchy ones

Biologization, Nanotechnology, Simulation: Proceedings of the 1st Joint PhD Conference on Material Science:: from 27.6.-1.7.2022 in Dresden/ Germany and Usti/Česká republika

Materials scientists from Ústí nad Labem and Dresden met in June of 2022 for the first joint PhD Conference on Material Science, with the special focus on biologization, nanotechnology and simulation. The conference aimed to encourage interdisciplinary exchange between Čzech and German research institutes and promote transnational cooperation on an international level along the Saxon- Čzech border. Due to the restrictions caused by the corona pandemic, several attempts were necessary before the conference, which was first planned in 2020, could finally take place for the first time in 2022. The conference could take place in presence, which was seen as a big plus by all participants, especially as it was the first meeting in this German - Čzech context for most of the participants. The attending scientists (about 60) met at the Institute of Material Science of TU Dresden in Germany for the first half of the week before the conference moved to the faculties of Science and Environment of the Jan Evangelista Purkyně University UJEP in Ústí nad Labem in Čzechia. The organized activities ranged from scientific presentations of current PhD projects and research topics, lab tours in the participating institutions, come-together events such as a guided tour at the dye collection of the TU Dresden and a hiking trip to Bohemian Switzerland. The conference was funded by INTERREG VA Saxony - Čzech Republic - a cooperation programme of the Elbe/Labe region. All participants - PhD students, scientists and staff members of the participating institutions - enjoyed this opportunity to build individual and new contacts, exchange information on current research topics and methods, find starting points for future collaborations between the different research areas and institutions and also discuss the similarities and differences between the German and Čzech research landscape. The purpose of this brochure is to present the institutions with their special topics and laboratories and to present current research topics - on the base of the presented PhD projects.:1 Introduction 2 1.1 Committees 5 2 Presentation of the participating institutes and chairs 5 2.1 Jan Evangelista Purkyně University in Ústí nad Labem 6 2.1.1 Faculty of Science 6 2.1.2 Faculty of Environment 12 2.2 Technische Universität Dresden 17 2.2.1 Institute of Material Science 17 2.3 Fraunhofer Institute for Ceramic Technologies and Systems IKTS 19 2.3.1 Department Bio- and Nanotechnology at IKTS 19 2.4 Institute for Complex Materials, Leibniz-IFW Dresden 21 2.5 TRANS³Net 22 3 Presentation of the PhD topics 23 3.1 Topic: BIOLOGIZATION 23 3.1.1 Ludovico Andrea Alberta: Exploring the effect of Cu additions on the mechanical behaviour of β-TiNb biomaterials 23 3.1.2 Franziska Alt: Formation of a microenvironment for directed differentiation of stem cells in a perfusion bioreactor 25 3.1.3 Dmitry Belyaev: Circular microfluidic systems for electro-chemical continuous monitoring of bio-chemicals in emulsion droplets 27 3.1.4 Constantin Ißleib: Dynamic osteoimmunological crosstalk in a bone replacement context 28 3.1.5 Adela Jagerová: Surface Modification by High-Energy Heavy-Ion Irradiation in Various Crystalline ZnO Facets 29 3.1.6 Nils Kaube: Bioinspired development of artificial enamel via in-situ nano-mineralization 30 3.1.7 Michaela Kocholata: Isolation and characterization of plant derived nanovesicles 30 3.1.8 Zuzana Nejedlá: Dendrimers as Drug Delivery System 31 3.1.9 Jacub Perner: Effect of cold plasma treatment of Poppy and Proso Millet seeds in plasma downer 32 3.1.10 Marina Roshchina: Development of new bacteria-killing coatings on beta-Ti-Nb alloy based on functional oxide nanotubular (ONT) layers 33 3.1.11 Muhammad Saqib: Algorithms and fluid-dynamic experimental platform for in vitro degradation studies of implant materials 34 3.1.12 Jacub Tolasz: Interaction of pollutants on nanoceria 35 3.1.13 Zuzana Žmudová: 3D spheroid culture for in vitro testing of nanoparticles 35 3.2 Topic: METROLOGY 37 3.2.1 Katrien Boonen: The potential of dendrochemistry and dendroecology in pollution research 37 3.2.2 Ivan Lopez Carasco: Development of immobilization protocols for Tro6 and Tro4 aptamers to be used in electrochemical biosensor 38 3.2.3 Jacub Hoskovec: Functionalized electrospun materials for selectvie capture of selected gases 39 3.2.4 Dominic Pilnaj: Applications of gas sensors for air-quality monitoring and identification of volatile organic compounds by GC-HRMS 39 3.2.5 Michaela Průšová: Prostat, Glioblastoma and Mammary carcinoma cells derived exosomes: Their isolation, characterization and loading with doxorubicin 40 3.2.6 Kateřina Přibylová: Preparation of nanostructured surfaces for CO2 Detection, Capture and Utilization 41 3.2.7 Michal Syrový: Chemical modification of PAN – based nanofibrous membranes prepared by electrospinning and their properties for CO2 capture potential 42 3.3 Topic: GEOLOGICAL/MATERIALS 43 3.3.1 Sabine Apelt: Using biomimicry to design anti-ice surfaces for air-water heat pumps 43 3.3.2 Jan Dočkal: Molecular dynamics of interfacial solution structure of alkali-halide electrolytes at graphens electrodes 47 3.3.3 Tereza Dušková: Metal complexes with polyfluorinated NHCs 48 3.3.4 Kristína Fiantoková: Obtaining of the active mass from the spent Li-Ion batteries 48 3.3.5 Stephanie Ihmann: Engineering of bio-based Building and Construction Materials 49 3.3.6 Sara Jalali: Degradable bone substitute materials with load-bearing properties - Fiber-strengthened silica 50 3.3.7 Pavel Kaule: Preparation of heteroborane derivatives for thin film deposition by the covalent bond formation 53 3.3.8 M. Kozakovic: The effect of primary and secondary flows on the homogenization process in a vertical bladed mixer 53 3.3.9 Pavlína Matysová: Molecular Simulation of Salt Hydrates 54 3.3.10 Viktorie Neubertová: Surface functionalization of Ti3C2T MXene for MRI contrast agent 55 3.3.11 Robert Ato Newton: Fuel characteristics of Miscanthus x giganteus biomass produced at the marginal and slightly contaminated by trace elements soils 55 3.3.12 Martin Otto: Bioresorbable Fe-based alloys processed via laser powder bed fusion 56 3.3.13 Petr Panuška: A millifluidic chip for cultivation of fish embryos and toxicity testing fabricated by 3D printing technology 59 3.3.14 David Poustka: Unlocking mass production of photocrosslinked chitosan nanofibers 60 3.3.15 Eliška Rezlerová: Adsorption and Diffusion of Short Hydrocarbons and Carbon Dioxide in Shale Organic Matter: Insights from Molecular Simulations 60 3.3.16 Stefan Weitz: Investigating the material hardness of mollusks shells in dry and wet states by microindentation 6