A QoS-Aware Dynamic Bandwidth Allocation algorithm for passive optical networks with non-zero laser tuning time

The deployment of new 5G services and future demands for 6G make it necessary to increase the performance of access networks. This challenge has prompted the development of new standardization proposals for Passive Optical access Networks (PONs) that offer greater bandwidth, greater reach and a higher rate of aggregation of users per fiber, being Time- and Wavelength-Division Multiplexing (TWDM) a promising technological solution for increasing the capacity by up to 40 Gbps by using several wavelengths. This solution introduces tunable transceivers into the Optical Network Units (ONUs) for switching from one wavelength to the other, thus addressing the ever-increasing bandwidth demands in residential broadband and mobile fronthaul networks based on Fiber to the Home (FTTH) technology. This adds complexity and sources of inefficiency, such as the laser tuning time (LTT) delay, which is often ignored when evaluating the performance of Dynamic Bandwidth Allocation (DBA) mechanisms. We present a novel DBA algorithm that dynamically handles the allocation of bandwidth and switches the ONUs’ lasers from one wavelength to the other while taking LTT into consideration. To optimize the packet delay, we introduce a scheduling mechanism that follows the Longest Processing Time first (LPT) scheduling discipline, which is implemented over the Interleaved Polling with Adaptive Cycle Time (IPACT) DBA. We also provide quality of service (QoS) differentiation by introducing the Max-Min Weighted Fair Share Queuing principle (WFQ) into the algorithm. The performance of our algorithm is evaluated through simulations against the original IPACT algorithm, which we have extended to support multi-wavelengths. With the introduction of LPT, we obtain an improved performance of up to 73% reduction in queue delay over IPACT while achieving QoS differentiation with WFQ.This work has been supported by the Agencia Estatal de Investigación of Spain under project PID2019‐108713RB‐C51/AEI/10.13039/501100011033.Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les personesObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectivesPostprint (published version

Optimizing resource allocation in next-generation optical access networks

To meet rapidly increasing traffic demands caused by the popularization of Internet and the spouting of bandwidth-demanding applications, Passive Optical Networks (PONs) exploit the potential capacities of optical fibers, and are becoming promising future-proof access network technologies. On the other hand, for a broader coverage area and higher data rate, integrated optical and wireless access is becoming a future trend for wireless access. This thesis investigates three next-generation access networks: Time Division Multiplexing (TDM) PONs, Wavelength Division Multiplexing (WDM) PONs, and WDM Radio-Over-Fiber (RoF) Picocellular networks. To address resource allocation problems in these three networks, this thesis first investigates respective characteristics of these networks, and then presents solutions to address respective challenging problems in these networks. In particular, three main problems are addressed: arbitrating time allocation among different applications to guarantee user quality of experience (QoE) in TDM PONs, scheduling wavelengths optimally in WDM PONs, and jointly allocating fiber and radio resources in WDM RoF Picocellular networks. In-depth theoretical analysis and extensive simulations have been performed in evaluating and demonstrating the performances of the proposed schemes

Resource management research in ethernet passive optical networks

The last decades, we have witnessed different phenomenology in the telecommunications sector. One of them is the widespread use of the Internet, which has brought a sharp increase in traffic, forcing suppliers to continuously expand the capacity of networks. In the near future, Internet will be composed of long-range highspeed optical networks; a number of wireless networks at the edge; and, in between, several access technologies. Today one of the main problems of the Internet is the bottleneck in the access segment. To address this issue the Passive Optical Networks (PONs) are very likely to succeed, due to their simplicity, low-cost, and increased bandwidth. A PON is made up of fiber optic cabling and passive splitters and couplers that distribute an optical signal to connectors that terminate each fiber segment. Among the different PON technologies, the Ethernet-PON (EPON) is a great alternative to satisfy operator and user needs, due to its cost, flexibility and interoperability with other technologies. One of the most interesting challenges in such technologies relates to the scheduling and allocation of resources in the upstream (shared) channel, i.e., the resource management. The aim of this thesis is to study and evaluate current contributions and propose new efficient solutions to address the resource management issues mainly in EPON. Key issues in this context are future end-user needs, quality of service (QoS) support, energy-saving and optimized service provisioning for real-time and elastic flows. This thesis also identifies research opportunities, issue recommendations and proposes novel mechanisms associated with access networks based on optical fiber technologies.Postprint (published version

On the Merits of Deploying TDM-based Next-Generation PON Solutions in the Access Arena As Multiservice, All Packet-Based 4G Mobile Backhaul RAN Architecture

The phenomenal growth of mobile backhaul capacity required to support the emerging fourth-generation (4G) traffic including mobile WiMAX, cellular Long-Term Evolution (LTE), and LTE-Advanced (LTE-A) requires rapid migration from today\u27s legacy circuit switched T1/E1 wireline and microwave backhaul technologies to a new fiber-supported, all-packet-based mobile backhaul infrastructure. Clearly, a cost effective fiber supported all-packet-based mobile backhaul radio access network (RAN) architecture that is compatible with these inherently distributed 4G RAN architectures is needed to efficiently scale current mobile backhaul networks. However, deploying a green fiber-based mobile backhaul infrastructure is a costly proposition mainly due to the significant cost associated with digging the trenches in which the fiber is to be laid. These, along with the inevitable trend towards all-IP/Ethernet transport protocols and packet switched networks, have prompted many carriers around the world to consider the potential of utilizing the existing fiber-based Passive Optical Network (PON) access infrastructure as an all-packet-based converged fixed-mobile optical access networking transport architecture to backhaul both mobile and typical wireline traffic. Passive Optical Network (PON)-based fiber-to-the-curb/home (FTTC/FTTH) access networks are being deployed around the globe based on two Time-Division Multiplexed (TDM) standards: ITU G.984 Gigabit PON (GPON) and IEEE 802.ah Ethernet PON (EPON). A PON connects a group of Optical Network Units (ONUs) located at the subscriber premises to an Optical Line Terminal (OLT) located at the service provider\u27s facility. It is the purpose of this thesis to examine the technological requirements and assess the performance analysis and feasibility for deploying TDM-based next-generation (NG) PON solutions in the access arena as multiservice, all packet-based 4G mobile backhaul RAN and/or converged fixed-mobile optical networking architecture. Specifically, this work proposes and devises a simple and cost-effective 10G-EPON-based 4G mobile backhaul RAN architecture that efficiently transports and supports a wide range of existing and emerging fixed-mobile advanced multimedia applications and services along with the diverse quality of service (QoS), rate, and reliability requirements set by these services. The techno-economics merits of utilizing PON-based 4G RAN architecture versus that of traditional 4G (mobile WiMAX and LTE) RAN will be thoroughly examine and quantified. To achieve our objective, we utilize the existing fiber-based PON access infrastructure with novel ring-based distribution access network and wireless-enabled OLT and ONUs as the multiservice packet-based 4G mobile backhaul RAN infrastructure. Specifically, to simplify the implementation of such a complex undertaking, this work is divided into two sequential phases. In the first phase, we examine and quantify the overall performance of the standalone ring-based 10G-EPON architecture (just the wireline part without overlaying/incorporating the wireless part (4G RAN)) via modeling and simulations. We then assemble the basic building blocks, components, and sub-systems required to build up a proof-of-concept prototype testbed for the standalone ring-based EPON architecture. The testbed will be used to verify and demonstrate the performance of the standalone architecture, specifically, in terms of power budget, scalability, and reach. In the second phase, we develop an integrated framework for the efficient interworking between the two wireline PON and 4G mobile access technologies, particularly, in terms of unified network control and management (NCM) operations. Specifically, we address the key technical challenges associated with tailoring a typically centralized PON-based access architecture to interwork with and support a distributed 4G RAN architecture and associated radio NCM operations. This is achieved via introducing and developing several salient-networking innovations that collectively enable the standalone EPON architecture to support a fully distributed 4G mobile backhaul RAN and/or a truly unified NG-PON-4G access networking architecture. These include a fully distributed control plane that enables intercommunication among the access nodes (ONUs/BSs) as well as signaling, scheduling algorithms, and handoff procedures that operate in a distributed manner. Overall, the proposed NG-PON architecture constitutes a complete networking paradigm shift from the typically centralized PON\u27s architecture and OLT-based NCM operations to a new disruptive fully distributed PON\u27s architecture and NCM operations in which all the typically centralized OLT-based PON\u27s NCM operations are migrated to and independently implemented by the access nodes (ONUs) in a distributed manner. This requires migrating most of the typically centralized wireline and radio control and user-plane functionalities such as dynamic bandwidth allocation (DBA), queue management and packet scheduling, handover control, radio resource management, admission control, etc., typically implemented in today\u27s OLT/RNC, to the access nodes (ONUs/4G BSs). It is shown that the overall performance of the proposed EPON-based 4G backhaul including both the RAN and Mobile Packet Core (MPC) {Evolved Packet Core (EPC) per 3GPP LTE\u27s standard} is significantly augmented compared to that of the typical 4G RAN, specifically, in terms of handoff capability, signaling overhead, overall network throughput and latency, and QoS support. Furthermore, the proposed architecture enables redistributing some of the intelligence and NCM operations currently centralized in the MPC platform out into the access nodes of the mobile RAN. Specifically, as this work will show, it enables offloading sizable fraction of the mobile signaling as well as actual local upstream traffic transport and processing (LTE bearers switch/set-up, retain, and tear-down and associated signaling commands from the BSs to the EPC and vice-versa) from the EPC to the access nodes (ONUs/BSs). This has a significant impact on the performance of the EPC. First, it frees up a sizable fraction of the badly needed network resources as well as processing on the overloaded centralized serving nodes (AGW) in the MPC. Second, it frees up capacity and sessions on the typically congested mobile backhaul from the BSs to the EPC and vice-versa

Quality management of surveillance multimedia streams via federated SDN controllers in Fiwi-iot integrated deployment environments

Traditionally, hybrid optical-wireless networks (Fiber-Wireless - FiWi domain) and last-mile Internet of Things edge networks (Edge IoT domain) have been considered independently, with no synergic management solutions. On the one hand, FiWi has primarily focused on high-bandwidth and low-latency access to cellular-equipped nodes. On the other hand, Edge IoT has mainly aimed at effective dispatching of sensor/actuator data among (possibly opportunistic) nodes, by using direct peer-to-peer and base station (BS)-assisted Internet communications. The paper originally proposes a model and an architecture that loosely federate FiWi and Edge IoT domains based on the interaction of FiWi and Edge IoT software defined networking controllers: The primary idea is that our federated controllers can seldom exchange monitoring data and control hints the one with the other, thus mutually enhancing their capability of end-to-end quality-aware packet management. To show the applicability and the effectiveness of the approach, our original proposal is applied to the notable example of multimedia stream provisioning from surveillance cameras deployed in the Edge IoT domain to both an infrastructure-side server and spontaneously interconnected mobile smartphones; our solution is able to tune the BS behavior of the FiWi domain and to reroute/prioritize traffic in the Edge IoT domain, with the final goal to reduce latency. In addition, the reported application case shows the capability of our solution of joint and coordinated exploitation of resources in FiWi and Edge IoT domains, with performance results that highlight its benefits in terms of efficiency and responsiveness

Contributions towards softwarization and energy saving in passive optical networks

Ths thesis is a result of contributions to optimize and improve the network management systme and power consumption in Passive Optical Network (PON). Passive Optical Network elements such as Optical Line Terminal (OLT) and Optical Network Units (ONUs) are currently managed by inflexible legacy network management systems. Software-Defined Networking (SDN) is a new networking paradigm that improves the operation and management of networks by decoupling control plane from data plane. Currently, network management in PON networks is not always automated nor normalized. One goal of the researchers in optical networking is to improve the programmability, efficiency, and global optimization of network operations, in order to minimize both Capital Expenditure (CAPEX) and Operational Expenditure (OPEX) by reducing the complexity of devices and its operation. Therefore, it makes sense to use an SDN approach in order to manage the passive optical network functionalities and migrating must of the upper layer functions to the SDN controller. Many approaches have already addressed the topic of applying the SDN architecture in PON networks. However; the focus was usually on facilitating the deployment of SDN-based service and so Service Interoperability remains unexplored in detail. The main challenge toward this goal is how to make compatible the synchronous nature of the EPON media access control protocols with the asynchronous architecture of SDN, and in particular, OpenFlow. In our proposed architecture, the OLT is partially virtualized and some of its functionalities are allocated to the core network management system, while the OLT itself is replaced by an OpenFlow switch. A new MultiPoint MAC Control (MPMC) sublayer extension based on the OpenFlow protocol is presented. The OpenFlow switch is extended with synchronous ports to retain the time-critical nature of the EPON network. Our simulation-based results demonstrate the effectiveness of the new architecture, while retaining a similar (or improved) performance in term of delay and throughput when compared to legacy PONs. Nowadays, many researchers are working simultaneously to develop power saving techniques and improves energy efficiency in the PON network, and since the contribution of access networks to the global energy consumption is large, energy efficiency has become an increasingly important requirement in designing access networks. Therefore, energy-saving approaches are being investigated to provide high performance and consume less energy. Several techniques have been proposed to increase energy efficiency in PON networks. Such techniques are related to the centeralized DBA but the advantage of power saving in a distributed DBA remains untouched. We present a distributed energy-efficient Dynamic Bandwidth Allocation (DBA) algorithm for both the upstream and downstream channels of EPON to improve energy efficiency in EPON networks. The proposed algorithm analyzes the queue status of the ONUs and OLT in order to power-off the transmitter and/or receiver of an ONU whenever there is no upstream or downstream traffic. We have been able to combine the advantage of a distributed DBA such as DDSPON (a smaller packet delay, due to the shorter time needed by DDSPON to allocate the transmission slots) and the energy-saving features (that come at a price of longer packet delays due to the fact that switching off the transmitters make the packet queues grow). Our proposed DBA algorithm minimizes the ONU energy consumption across a wide range of network loads, while maintaining at an acceptable level the penalty introduced in terms of channel utilization and packet delay.Las contribuciones de esta tesis se centran en mejorar el sistema de gestión de red y el consumo de energía en redes de acceso ópticas pasivas (PON). Los elementos de las redes PON, como el terminal de línea óptica (OLT) y las unidades de red ópticas (ONU), se gestionan actualmente mediante sistemas poco flexibles. El nuevo paradigma de redes definidas por software (SDN) mejora la gestión de redes al desacoplar el plano de control del plano de datos. Actualmente, la gestión de redes PON no está automatizada ni normalizada. Uno de los objetivos de los investigadores en redes ópticas es mejorar la programabilidad, la eficiencia y la optimización global de las operaciones de red, con el fin de minimizar tanto el gasto de capital (CAPEX) como el gasto operativo (OPEX) al reducir la complejidad de los dispositivos y su funcionamiento. Por lo tanto, tiene sentido utilizar un enfoque SDN para gestionar las funciones de red óptica pasiva y migrar algunas de las funciones PON de capas superiores al controlador SDN. Otros investigadores han estudiado esta aproximación. sin embargo; el enfoque generalmente estaba en facilitar la implementación del servicio basado en SDN y, por lo tanto, la interoperabilidad de los servicios permanecía sin ser explorado en detalle. El principal desafío hacia este objetivo es cómo compatibilizar la naturaleza síncrona de los protocolos de control de acceso a medios EPON con la arquitectura asíncrona de SDN y, en particular, OpenFlow. En nuestra propuesta de arquitectura, la OLT se virtualiza parcialmente y algunas de sus funcionalidades se asignan al sistema de gestión de red centralizado, mientras que la OLT se reemplaza por un conmutador OpenFlow. Proponemos una nueva extensión de la subcapa de control múltiple de MAC (MPMC) basada en el protocolo OpenFlow. El conmutador OpenFlow se amplía con puertos síncronos para asegurar la naturaleza de tiempo real de la red EPON. Nuestros resultados basados ¿¿en simulaciones demuestran la efectividad de la nueva arquitectura, al tiempo que se mantiene un rendimiento similar (o mejorado) en términos de retardos y rendimiento en comparación con las PON clásicas. Por otro lado, se están desarrollando técnicas de ahorro de energía y mejora de la eficiencia energética en redes PON, y dado que la contribución de las redes de acceso al consumo total de energía es importante, la eficiencia energética se ha convertido en un requisito cada vez más importante. Se han propuesto varias técnicas por parte de otros autores para aumentar la eficiencia energética en las redes PON, relacionadas con algoritmos DBA (Dynamic Bandwidth Allocation) centralizados, pero las ventaja del ahorro de energía en un DBA distribuido no se ha explorado todavía. Por ello nuestra segunda contiribución es un algoritmo distribuido de asignación dinámica de ancho de banda energéticamente eficiente tanto para los canales ascendentes como descendentes de EPON para mejorar la eficiencia energética en las redes EPON. El algoritmo propuesto analiza el estado de cola de las ONU y la OLT para apagar el transmisor y/o el receptor de una ONU cuando no hay tráfico en sentido ascendente o descendente. Hemos podido combinar la ventaja de un DBA distribuido como DDSPON (que asegura retardos más pequeños, debido al menor tiempo que DDSPON necesita para asignar las ranuras de transmisión) y las características de ahorro de energía (al precio de tener retardos de paquete más grandes debido al hecho de que apagar los transmisores hace que las colas de paquetes crezcan). Nuestro algoritmo de DBA propuesto minimiza el consumo de energía de la ONU en una amplia gama de cargas de red, mientras mantiene a un nivel aceptable la penalización introducida en términos de utilización del canal y retardos

Contributions towards softwarization and energy saving in passive optical networks

Ths thesis is a result of contributions to optimize and improve the network management systme and power consumption in Passive Optical Network (PON). Passive Optical Network elements such as Optical Line Terminal (OLT) and Optical Network Units (ONUs) are currently managed by inflexible legacy network management systems. Software-Defined Networking (SDN) is a new networking paradigm that improves the operation and management of networks by decoupling control plane from data plane. Currently, network management in PON networks is not always automated nor normalized. One goal of the researchers in optical networking is to improve the programmability, efficiency, and global optimization of network operations, in order to minimize both Capital Expenditure (CAPEX) and Operational Expenditure (OPEX) by reducing the complexity of devices and its operation. Therefore, it makes sense to use an SDN approach in order to manage the passive optical network functionalities and migrating must of the upper layer functions to the SDN controller. Many approaches have already addressed the topic of applying the SDN architecture in PON networks. However; the focus was usually on facilitating the deployment of SDN-based service and so Service Interoperability remains unexplored in detail. The main challenge toward this goal is how to make compatible the synchronous nature of the EPON media access control protocols with the asynchronous architecture of SDN, and in particular, OpenFlow. In our proposed architecture, the OLT is partially virtualized and some of its functionalities are allocated to the core network management system, while the OLT itself is replaced by an OpenFlow switch. A new MultiPoint MAC Control (MPMC) sublayer extension based on the OpenFlow protocol is presented. The OpenFlow switch is extended with synchronous ports to retain the time-critical nature of the EPON network. Our simulation-based results demonstrate the effectiveness of the new architecture, while retaining a similar (or improved) performance in term of delay and throughput when compared to legacy PONs. Nowadays, many researchers are working simultaneously to develop power saving techniques and improves energy efficiency in the PON network, and since the contribution of access networks to the global energy consumption is large, energy efficiency has become an increasingly important requirement in designing access networks. Therefore, energy-saving approaches are being investigated to provide high performance and consume less energy. Several techniques have been proposed to increase energy efficiency in PON networks. Such techniques are related to the centeralized DBA but the advantage of power saving in a distributed DBA remains untouched. We present a distributed energy-efficient Dynamic Bandwidth Allocation (DBA) algorithm for both the upstream and downstream channels of EPON to improve energy efficiency in EPON networks. The proposed algorithm analyzes the queue status of the ONUs and OLT in order to power-off the transmitter and/or receiver of an ONU whenever there is no upstream or downstream traffic. We have been able to combine the advantage of a distributed DBA such as DDSPON (a smaller packet delay, due to the shorter time needed by DDSPON to allocate the transmission slots) and the energy-saving features (that come at a price of longer packet delays due to the fact that switching off the transmitters make the packet queues grow). Our proposed DBA algorithm minimizes the ONU energy consumption across a wide range of network loads, while maintaining at an acceptable level the penalty introduced in terms of channel utilization and packet delay.Las contribuciones de esta tesis se centran en mejorar el sistema de gestión de red y el consumo de energía en redes de acceso ópticas pasivas (PON). Los elementos de las redes PON, como el terminal de línea óptica (OLT) y las unidades de red ópticas (ONU), se gestionan actualmente mediante sistemas poco flexibles. El nuevo paradigma de redes definidas por software (SDN) mejora la gestión de redes al desacoplar el plano de control del plano de datos. Actualmente, la gestión de redes PON no está automatizada ni normalizada. Uno de los objetivos de los investigadores en redes ópticas es mejorar la programabilidad, la eficiencia y la optimización global de las operaciones de red, con el fin de minimizar tanto el gasto de capital (CAPEX) como el gasto operativo (OPEX) al reducir la complejidad de los dispositivos y su funcionamiento. Por lo tanto, tiene sentido utilizar un enfoque SDN para gestionar las funciones de red óptica pasiva y migrar algunas de las funciones PON de capas superiores al controlador SDN. Otros investigadores han estudiado esta aproximación. sin embargo; el enfoque generalmente estaba en facilitar la implementación del servicio basado en SDN y, por lo tanto, la interoperabilidad de los servicios permanecía sin ser explorado en detalle. El principal desafío hacia este objetivo es cómo compatibilizar la naturaleza síncrona de los protocolos de control de acceso a medios EPON con la arquitectura asíncrona de SDN y, en particular, OpenFlow. En nuestra propuesta de arquitectura, la OLT se virtualiza parcialmente y algunas de sus funcionalidades se asignan al sistema de gestión de red centralizado, mientras que la OLT se reemplaza por un conmutador OpenFlow. Proponemos una nueva extensión de la subcapa de control múltiple de MAC (MPMC) basada en el protocolo OpenFlow. El conmutador OpenFlow se amplía con puertos síncronos para asegurar la naturaleza de tiempo real de la red EPON. Nuestros resultados basados ¿¿en simulaciones demuestran la efectividad de la nueva arquitectura, al tiempo que se mantiene un rendimiento similar (o mejorado) en términos de retardos y rendimiento en comparación con las PON clásicas. Por otro lado, se están desarrollando técnicas de ahorro de energía y mejora de la eficiencia energética en redes PON, y dado que la contribución de las redes de acceso al consumo total de energía es importante, la eficiencia energética se ha convertido en un requisito cada vez más importante. Se han propuesto varias técnicas por parte de otros autores para aumentar la eficiencia energética en las redes PON, relacionadas con algoritmos DBA (Dynamic Bandwidth Allocation) centralizados, pero las ventaja del ahorro de energía en un DBA distribuido no se ha explorado todavía. Por ello nuestra segunda contiribución es un algoritmo distribuido de asignación dinámica de ancho de banda energéticamente eficiente tanto para los canales ascendentes como descendentes de EPON para mejorar la eficiencia energética en las redes EPON. El algoritmo propuesto analiza el estado de cola de las ONU y la OLT para apagar el transmisor y/o el receptor de una ONU cuando no hay tráfico en sentido ascendente o descendente. Hemos podido combinar la ventaja de un DBA distribuido como DDSPON (que asegura retardos más pequeños, debido al menor tiempo que DDSPON necesita para asignar las ranuras de transmisión) y las características de ahorro de energía (al precio de tener retardos de paquete más grandes debido al hecho de que apagar los transmisores hace que las colas de paquetes crezcan). Nuestro algoritmo de DBA propuesto minimiza el consumo de energía de la ONU en una amplia gama de cargas de red, mientras mantiene a un nivel aceptable la penalización introducida en términos de utilización del canal y retardos.Postprint (published version