696 research outputs found

    Perspective of buried oxide thickness variation on triple metal-gate (TMG) recessed-S/D FD-SOI MOSFET

    Get PDF
    Recently, Fully-Depleted Silicon on Insulator (FD-SOI) MOSFETs have been accepted as a favourable technology beyond nanometer nodes, and the technique of Recessed-Source/Drain (Re-S/D) has made it more immune in regards of various performance factors. However, the proper selection of Buried-Oxide (BOX) thickness is one of the major challenges in the design of FD-SOI based MOS devices in order to suppress the drain electric penetrations across the BOX interface efficiently. In this work, the effect of BOX thickness on the performance of TMG Re-S/D FD-SOI MOSFET has been presented at 60 nm gate length. The perspective of BOX thickness variation has been analysed on the basis of its surface potential profile and the extraction of the threshold voltage by performing two-dimensional numerical simulations. Moreover, to verify the short channel immunity, the impact of gate length scaling has also been discussed. It is found that the device attains two step-up potential profile with suppressed short channel effects. The outcomes reveal that the Drain Induced Barrier Lowering (DIBL) values are lower among conventional SOI MOSFETs. The device has been designed and simulated by using 2D numerical ATLAS Silvaco TCAD simulator

    Simulation study of vertically stacked lateral Si nanowires transistors for 5 nm CMOS applications

    Get PDF
    In this paper we present a simulation study of vertically stacked lateral nanowires transistors (NWTs), which may have applications at 5nm CMOS technology. Our simulation approach is based on a collection of simulation techniques to capture the complexity in such ultra-scaled devices. Initially, we used drift-diffusion methodology with activated Poisson-Schrodinger quantum corrections to accurately capture the quantum confinement in the cross-section of the device. Ensemble Monte Carlo simulations are used to accurately evaluate the drive current capturing the complexity of the carrier transport in the NWTs. We compared the current flow in single, double, and triple vertically stacked lateral NWTs with and without contact resistance. The results presented here suggest a consistent link between channel strain and device performance. Furthermore, we propose a device structure for the 5nm CMOS technology node that meets the required industry scaling projection. We also consider the interplay between various sources of statistical variability and reliability in this work

    Design and analytical performance of subthreshold characteristics of CSDG MOSFET.

    Get PDF
    Masters Degree. University of KwaZulu-Natal, Durban.The downscaling of the Metal-Oxide-Semiconductor Field Effect Transistors (MOSFET) devices have been the driving force for Nanotechnology and Very Large-Scale Integration (VLSI) systems. This is affirmed by Moore’s law which states that “The number of transistors placed in an Integrated Circuit (IC) or chip doubles approximately every two years”. The main objectives for the transistor scaling are: to increase functionality, switching speed, packing density and lower the operating power of the ICs. However, the downscaling of the MOSFET device is posed with various challenges such as the threshold roll-off, Drain Induced Barrier Lowing (DIBL), surface scattering, and velocity saturation known as Short Channel Effects (SCEs). To overcome these challenges, a cylindrically structured MOSFET is employed because it increases the switching speed, current flow, packing density, and provides better immunity to SCEs. This thesis proposes a Cylindrical Surrounding Double-Gate (CSDG) MOSFET which is an extended version of Double-Gate (DG) MOSFET and Cylindrical Surrounding-Gate (CSG) MOSFET in terms of form factor and current drive respectively. Furthermore, employing the Evanescent-Mode analysis (EMA) of a two-dimensional (2D) Poisson solution, the performance analysis of the novel CSDG MOSFET is presented. The channel length, radii Silicon film difference, and the oxide thickness are investigated for the CSDG MOSFET at the subthreshold regime. Using the minimum channel potential expression obtained by EMA, the threshold voltage and the subthreshold swing model of the proposed CSDG MOSFET are evaluated and discussed. The device performance is verified with various values of radii Silicon film difference and gate oxide thickness Finally, the low operating power and switching characteristics of the proposed CSDG MOSFET has been employed to design a simple CSDG bridge rectifier circuit for micropower electricity (energy harvester). Similar to the traditional MOSFETs, the switching process of CSDG MOSFET is in two operating modes: switch-ON (conduction of current between the drain and source) or switched-OFF (no conduction of current). However, unlike the traditional diode bridge rectifier which utilizes four diodes for its operation, the CSDG bridge rectifier circuits employs only two CSDGs (n-channel and p- channel) for its operation. This optimizes cost and improves efficiency. Finally, the results from the analyses demonstrate that the proposed CSDG MOSFET is a promising device for nanotechnology and self-micro powered device system application

    Compact modeling of the rf and noise behavior of multiple-gate mosfets

    Get PDF
    La reducción de la tecnología MOSFET planar ha sido la opción tecnológica dominante en las últimas décadas. Sin embargo, hemos llegado a un punto en el que los materiales y problemas en los dispositivos surgen, abriendo la puerta para estructuras alternativas de los dispositivos. Entre estas estructuras se encuentran los dispositivos DG, SGT y Triple-Gate. Estas tres estructuras están estudiadas en esta tesis, en el contexto de rducir las dimensiones de los dispositivos a tamaños tales que los mecanismos cuánticos y efectos de calan coro deben tenerse n cuenta. Estos efectos vienen con una seria de desafíos desde el pun to de vista de modelación, unos de los más grandes siendo el tiempo y los recursos comprometidos para ejecutar las simulaciones. para resolver este problema, esta tesis propone modelos comlets analíticos y compactos para cada una de las geometrías, validos desde DC hasta el modo de operación en Rf para los nodos tecnológicos futuros. Dichos modelos se han extendido para analizar el ruido de alta frecuencia en estos diapositivos

    Performance Comparison of Stacked Dual-Metal Gate Engineered Cylindrical Surrounding Double-Gate MOSFET

    Get PDF
    In this research work, a Cylindrical Surrounding Double-Gate (CSDG) MOSFET design in a stacked-Dual Metal Gate (DMG) architecture has been proposed to incorporate the ability of gate metal variation in channel field formation. Further, the internal gate's threshold voltage (VTH1) could be reduced compared to the external gate (VTH2) by arranging the gate metal work-function in Double Gate devices. Therefore, a device design of CSDG MOSFET has been realized to instigate the effect of Dual Metal Gate (DMG) stack architecture in the CSDG device. The comparison of device simulation shown optimized electric field and surface potential profile. The gradual decrease of metal work function towards the drain also improves the Drain Induced Barrier Lowering (DIBL) and subthreshold characteristics. The physics-based analysis of gate stack CSDG MOSFET that operates in saturation involving the analogy of cylindrical dual metal gates has been considered to evaluate the performance improvements. The insights obtained from the results using the gate-stack dual metal structure of CSDG are quite promising, which can serve as a guide to further reduce the threshold voltage roll-off, suppress the Hot Carrier Effects (HCEs) and Short Channel Effects (SCEs)

    Analytical predictive 2d modeling of pinch-off behavior in nanoscale multi-gate mosfets

    Get PDF
    In this thesis the pinch-off behavior in nanoscale Multi-Gate MOSFETs was reviewed and with compact models described. For this a 2D approach with Schwarz-Christoffel conformal mapping technique was used. A model to calculate the current in single gate MOSFETs was derived and compared to device simulations from TCAD Sentaurus down to 50nm. For the DoubleGate MOSFET a new way to define the saturation point was found. A fully 2D closed-form model to locate this point was created. It was also found that with quantum mechanics effects a pinch-off point can occur and can be described with the same model. Furthermore the model was extended to describe the coupled pinch-off points in an asymmetrical biased DoubleGate MOSET with an even an odd mode. Also the saturation point behavior in FinFETs was examinated

    Devenlopment of Compact Small Signal Quasi Static Models for Multiple Gate Mosfets

    Get PDF
    En esta tesis hemos desarrollado los modelos compactos explícitos de carga y de capacitancia adaptados para los dispositivos dopados y no dopados de canal largo (DG MOSFETs dopados, DG MOSFETs no dopados, UTB MOSFETs no dopados y SGT no dopados) de un modelo unificado del control de carga derivado de la ecuación de Poisson. El esquema de modelado es similar en todos estos dispositivos y se adapta a cada geometría. Los modelos de la C.C. y de la carga son completamente compatibles. Las expresiones de la capacitancia se derivan del modelo de la carga. La corriente, la carga total y las capacitancias se escriben en términos de las densidades móviles de la carga en los extremos de fuente y drenador del canal. Las expresiones explícitas e infinitamente continuas se utilizan para las densidades móviles de la carga en la fuente y drenador. Las capacitancias modeladas demuestran el acuerdo excelente con las simulaciones numéricas 2D y 3D (SGT), en todos los regímenes de funcionamiento. Por lo tanto, el modelo es muy prometedor para ser utilizado en simuladores del circuito. Desafortunadamente, no mucho trabajo se ha dedicado a este dominio de modelado. Las cargas analíticas y las capacitancias, asociadas a cada terminal se prefieren en la simulación de circuito. Con respecto al SGT MOSFET, nuestro grupo fue el primero en desarrollar y publicar un modelo de las cargas y de las capacitancias intrínsecas, que es también analítico y explícito. La tesis es organizada como sigue: el capítulo (1) presenta el estado del arte, capítulo (2) el modelado compacto de los cuatro dispositivos: DG MOSFETs dopados, DG MOSFETs no dopados, UTB MOSFETs no dopados y SGT no dopados; en el capítulo (3) estudiamos las capacitancias de fricción en MuGFETs. Finalmente el capítulo (4) resuma el trabajo hecho y los futuros objetivos que necesitan ser estudiados. Debido a la limitación de los dispositivos optimizados disponibles para el análisis, la simulación numérica fue utilizada como la herramienta principal del análisis. Sin embargo, cuando estaban disponibles, medidas experimentales fueron utilizadas para validar nuestros resultados. Por ejemplo, en la sección 2A, en el caso de DG MOSFETs altamente dopados podríamos comparar nuestros resultados con datos experimentales de FinFETs modelados como DG MOSFETs. La ventaja principal de este trabajo es el carácter analítico y explícito del modelo de la carga y de la capacitancia que las hace fácil de implementar en simuladores de circuitos. El modelo presenta los resultados casi perfectos para diversos casos del dopaje y para diversas estructuras no clásicas del MOSFET (los DG MOSFETs, los UTB MOSFETs y los SGTs). La variedad de las estructuras del MOSFET en las cuales se ha incluido nuestro esquema de modelado y los resultados obtenidos, demuestran su validez absoluta. En el capítulo 3, investigamos la influencia de los parámetros geométricos en el funcionamiento en RF de los MuGFETs. Demostramos el impacto de parámetros geométricos importantes tales como el grosor de la fuente y del drenador o, el espaciamiento de las fins, la anchura del espaciador, etc. en el componente parásito de la capacitancia de fricción de los transistores de la múltiple-puerta (MuGFET). Los resultados destacan la ventaja de disminuir el espaciamiento entre las fins para MuGFETs y la compensación entre la reducción de las resistencias parásitas de fuente y drenador y el aumento de capacitancias de fricción cuando se introduce la tecnología del crecimiento selectivo epitaxial (SEG). La meta de nuestro estudio y trabajo es el uso de nuestros modelos en simuladores de circuitos. El grupo de profesor Aranda, de la Universidad de Granada ha puesto el modelo actual de SGT en ejecución en el simulador Agilent ADS y buenos resultados fueron obtenidos.In this thesis we have developed explicit compact charge and capacitance models adapted for doped and undoped long-channel devices (doped Double-Gate (DG) MOSFETs, undoped DG MOSFETs, undoped Ultra-Thin-Body (UTB) MOSFETs and undoped Surrounding Gate Transistor (SGT)) from a unified charge control model derived from Poisson's equation. The modelling scheme is similar in all these devices and is adapted to each geometry. The dc and charge models are fully compatible. The capacitance expressions are derived from the charge model. The current, total charges and capacitances are written in terms of the mobile charge sheet densities at the source and drain ends of the channel. Explicit and infinitely continuous expressions are used for the mobile charge sheet densities at source and drain. As a result, all small signal parameters will have an infinite order of continuity. The modeled capacitances show excellent agreement with the 2D and 3D (SGT) numerical simulations, in all operating regimes. Therefore, the model is very promising for being used in circuit simulators. Unfortunately, not so much work has been dedicated to this modelling domain. Analytical charges and capacitances, associated with each terminal are preferred in circuit simulation. Regarding the surrounding-gate MOSFET, our group was the first to develop and publish a model of the charges and intrinsic capacitances, which is also analytic and explicit. The thesis is organized as follows: Chapter (1) presents the state of the art, Chapter (2) the compact modeling of the four devices: doped DG MOSFETs, undoped DG MOSFETs, undoped UTB MOSFETs and undoped SGT; in Chapter (3) we study the fringing capacitances in MuGFETs. Finally Chapter (4) summarizes the work done and the future points that need to be studied. Due to the limitation of available optimized devices for analysis, numerical simulation was used as the main analysis tool. However, when available, measurements were used to validate our results. The experimental part was realised at the Microelectronics Laboratory, Université Catholique de Louvain, Louvain-la Neuve, Belgium. For example, in section 2A, in the case of highly-doped DG MOSFETs we could compare our results with experimental data from FinFETs modeled as DG MOSFETs. The main advantage of this work is the analytical and explicit character of the charge and capacitance model that makes it easy to implement in circuit simulators. The model presents almost perfect results for different cases of doping (doped/undoped devices) and for different non classical MOSFET structures (DG MOSFET, UTB MOSFETs and SGT). The variety of the MOSFET structures in which our modeling scheme has been included and the obtained results, demonstrate its absolute validity. In chapter 3, we investigate the influence of geometrical parameters on the RF performance in MuGFETs. We show the impact of important geometrical parameters such as source and drain thickness, fin spacing, spacer width, etc. on the parasitic fringing capacitance component of multiple-gate field-effect transistors (MuGFET). Results highlight the advantage of diminishing the spacing between fins for MuGFETs and the trade-off between the reduction of parasitic source and drain resistances and the increase of fringing capacitances when Selective Epitaxial Growth (SEG) technology is introduced. The goal of our study and work is the usage of our models in circuit simulators. This part, of implementing and testing our models of these multi gate MOSFET devices in circuit simulators has already begun. The group of Professor Aranda, from the University of Granada has implemented the SGT current model in the circuit simulator Agilent ADS and good results were obtained

    3D Device Modeling and Assessment of Triple Gate SOI FinFET for LSTP Applications

    Get PDF
    The FinFET is a very good candidate for future VLSI due to its simple architecture and better performance when compared to SOI MOSFET. SGOI (Silicon Germanium on Insulator) Recessed Source drain MOSFETs and SOI FinFETs are analyzed by a commercial 3-D device simulator. It is shown that SOI FinFET with Thin Fin widths compared to SGOI MOSFETs Body thicknesses, have better control over short channel effects (SCEs) and reduced power dissipation due to reduced gate leakage currents. By varying the spacer width and the Fin width, device performance is found to improve. The performance of triple gate FinFET has been compared with that of Ultra-Thin Body (UTB) Recessed Source drain SGOI MOSFET in terms of delay, power consumption and noise margin for a CMOS inverter and results indicate the better suitability of SOI FinFET structures for Low standby Power(LSTP) Applications. The SOI FinFET device Sensitivity to process parameters such as Gate Length, Spacer Width, Oxide thickness, Fin Width, Fin Height and Fin doping has been examined and reported
    corecore