A monitoring-based approach for WSN security using IEEE-802.15.4/6LowPAN and DTLS communication

International audienceIn this paper, we present a monitoring based approach for securing upper layer communications of WSN (Wireless Sensor Networks), the latter using IEEE802.15.4/6LoWPAN stacks and tinyDTLS. The monitoring techniques have been integrated as an extension to the industrial tool MMT (Montimage Monitoring Tool). The MMT-extension verifies that the network is working following a set of security rules that have been defined by ETSI. The security rules check if the protocol stack is working properly. If MMT detects a security rule that was not respected, then it sends an alarm to the system manager so that he can take properly reactive adjustments. We tested each of the security rules in MMT's extension using point-to-point configuration. After all these tests were verified, we tested our MMT-extension using real data gathered from the FIT IoT-LAB platform. The results of these tests shown that our MMT's extension for WSN using IEEE-802.15.4/6LowPAN and DTLS communication is feasible

Performance Evaluation of end-to-end security protocols in an Internet of Things

Wireless Sensor Networks are destined to play a fundamental role in the next-generation Internet, which will be characterized by the Machine-to-Machine paradigm, according to which, embedded devices will actively exchange information, thus enabling the development of innovative applications. It will contribute to assert the concept of Internet of Things, where end-to-end security represents a key issue. In such context, it is very important to understand which protocols are able to provide the right level of security without burdening the limited resources of constrained networks. This paper presents a performance comparison between two of the most widely used security protocols: IPSec and DTLS. We provide the analysis of their impact on the resources of embedded devices. For this purpose, we have modified existing implementations of both protocols to make them properly run on our hardware platforms, and we have performed an extensive experimental evaluation study. The achieved results are not a consequence of a classical simulation campaign, but they have been obtained in a real scenario that uses software and hardware typical of the current technological developments. Therefore, they can help network designers to identify the most appropriate secure mechanism for end-to-end IP communications involving constrained devices

Prospectiva de seguridad de las redes de sensores inalámbricos

En las Redes de Sensores Inalámbricos (WSN), los nodos son vulnerables a los ataques de seguridad porque están instalados en un entorno difícil, con energía y memoria limitadas, baja capacidad de procesamiento y transmisión de difusión media; por lo tanto, identificar las amenazas, los retos y las soluciones de seguridad y privacidad es un tema candente hoy en día. En este artículo se analizan los trabajos de investigación que se han realizado sobre los mecanismos de seguridad para la protección de las WSN frente a amenazas y ataques, así como las tendencias que surgen en otros países junto con futuras líneas de investigación. Desde el punto de vista metodológico, este análisis se muestra a través de la visualización y estudio de trabajos indexados en bases de datos como IEEE, ACM, Scopus y Springer, con un rango de 7 años como ventana de observación, desde 2013 hasta 2019. Se obtuvieron un total de 4.728 publicaciones, con un alto índice de colaboración entre China e India. La investigación planteó desarrollos, como avances en los principios de seguridad y mecanismos de defensa, que han llevado al diseño de contramedidas en la detección de intrusiones. Por último, los resultados muestran el interés de la comunidad científica y empresarial por el uso de la inteligencia artificial y el aprendizaje automático (ML) para optimizar las medidas de rendimiento.In Wireless Sensor Networks (WSN), nodes are vulnerable to security attacks because they are installed in a harsh environment with limited power and memory, low processing power, and medium broadcast transmission. Therefore, identifying threats, challenges, and solutions of security and privacy is a talking topic today. This article analyzes the research work that has been carried out on the security mechanisms for the protection of WSN against threats and attacks, as well as the trends that emerge in other countries combined with future research lines. From the methodological point of view, this analysis is shown through the visualization and study of works indexed in databases such as IEEE, ACM, Scopus, and Springer, with a range of 7 years as an observation window, from 2013 to 2019. A total of 4,728 publications were obtained, with a high rate of collaboration between China and India. The research raised developments, such as advances in security principles and defense mechanisms, which have led to the design of countermeasures in intrusion detection. Finally, the results show the interest of the scientific and business community in the use of artificial intelligence and machine learning (ML) to optimize performance measurements

Wireless communication technologies for the Internet of Things

Internet of Things (IoT) is the inter-networking paradigm based on many processes such as identifying, sensing, networking and computation. An IoT technology stack provides seamless connectivity between various physical and virtual objects. The increasing number of IoT applications leads to the issue of transmitting, storing, and processing a large amount of data. Therefore, it is necessary to enable a system capable to handle the growing traffic requirements with the required level of QoS (Quality of Service). IoT devices become more complex due to the various components such as sensors and network interfaces. The IoT environment is often demanding for mobile power source, QoS, mobility, reliability, security, and other requirements. Therefore, new IoT technologies are required to overcome some of these issues. In recent years new wireless communication technologies are being developed to support the development of new IoT applications. This paper provides an overview of some of the most widely used wireless communication technologies used for IoT applications

A Novel Architectural Framework on IoT Ecosystem, Security Aspects and Mechanisms: A Comprehensive Survey

For the past few years, the Internet of Things (IoT) technology continues to not only gain popularity and importance, but also witnesses the true realization of everything being smart. With the advent of the concept of smart everything, IoT has emerged as an area of great potential and incredible growth. An IoT ecosystem centers around innovation perspective which is considered as its fundamental core. Accordingly, IoT enabling technologies such as hardware and software platforms as well as standards become the core of the IoT ecosystem. However, any large-scale technological integration such as the IoT development poses the challenge to ensure secure data transmission. Perhaps, the ubiquitous and the resource-constrained nature of IoT devices and the sensitive and private data being generated by IoT systems make them highly vulnerable to physical and cyber threats. In this paper, we re-define an IoT ecosystem from the core technologies view point. We propose a modified three layer IoT architecture by dividing the perception layer into elementary blocks based on their attributed functions. Enabling technologies, attacks and security countermeasures are classified under each layer of the proposed architecture. Additionally, to give the readers a broader perspective of the research area, we discuss the role of various state-of-the-art emerging technologies in the IoT security. We present the security aspects of the most prominent standards and other recently developed technologies for IoT which might have the potential to form the yet undefined IoT architecture. Among the technologies presented in this article, we give a special interest to one recent technology in IoT domain. This technology is named IQRF that stands for Intelligent Connectivity using Radio Frequency. It is an emerging technology for wireless packet-oriented communication that operates in sub-GHz ISM band (868 MHz) and which is intended for general use where wireless connectivity is needed, either in a mesh network or point-to-point (P2P) configuration. We also highlighted the security aspects implemented in this technology and we compare it with the other already known technologies. Moreover, a detailed discussion on the possible attacks is presented. These attacks are projected on the IoT technologies presented in this article including IQRF. In addition, lightweight security solutions, implemented in these technologies, to counter these threats in the proposed IoT ecosystem architecture are also presented. Lastly, we summarize the survey by listing out some common challenges and the future research directions in this field.publishedVersio

An integrated security Protocol communication scheme for Internet of Things using the Locator/ID Separation Protocol Network

Internet of Things communication is mainly based on a machine-to-machine pattern, where devices are globally addressed and identified. However, as the number of connected devices increase, the burdens on the network infrastructure increase as well. The major challenges are the size of the routing tables and the efficiency of the current routing protocols in the Internet backbone. To address these problems, an Internet Engineering Task Force (IETF) working group, along with the research group at Cisco, are still working on the Locator/ID Separation Protocol as a routing architecture that can provide new semantics for the IP addressing, to simplify routing operations and improve scalability in the future of the Internet such as the Internet of Things. Nonetheless, The Locator/ID Separation Protocol is still at an early stage of implementation and the security Protocol e.g. Internet Protocol Security (IPSec), in particular, is still in its infancy. Based on this, three scenarios were considered: Firstly, in the initial stage, each Locator/ID Separation Protocol-capable router needs to register with a Map-Server. This is known as the Registration Stage. Nevertheless, this stage is vulnerable to masquerading and content poisoning attacks. Secondly, the addresses resolving stage, in the Locator/ID Separation Protocol the Map Server (MS) accepts Map-Request from Ingress Tunnel Routers and Egress Tunnel Routers. These routers in trun look up the database and return the requested mapping to the endpoint user. However, this stage lacks data confidentiality and mutual authentication. Furthermore, the Locator/ID Separation Protocol limits the efficiency of the security protocol which works against redirecting the data or acting as fake routers. Thirdly, As a result of the vast increase in the different Internet of Things devices, the interconnected links between these devices increase vastly as well. Thus, the communication between the devices can be easily exposed to disclosures by attackers such as Man in the Middle Attacks (MitM) and Denial of Service Attack (DoS). This research provided a comprehensive study for Communication and Mobility in the Internet of Things as well as the taxonomy of different security protocols. It went on to investigate the security threats and vulnerabilities of Locator/ID Separation Protocol using X.805 framework standard. Then three Security protocols were provided to secure the exchanged transitions of communication in Locator/ID Separation Protocol. The first security protocol had been implemented to secure the Registration stage of Locator/ID separation using ID/Based cryptography method. The second security protocol was implemented to address the Resolving stage in the Locator/ID Separation Protocol between the Ingress Tunnel Router and Egress Tunnel Router using Challenge-Response authentication and Key Agreement technique. Where, the third security protocol had been proposed, analysed and evaluated for the Internet of Things communication devices. This protocol was based on the authentication and the group key agreement via using the El-Gamal concept. The developed protocols set an interface between each level of the phase to achieve security refinement architecture to Internet of Things based on Locator/ID Separation Protocol. These protocols were verified using Automated Validation Internet Security Protocol and Applications (AVISPA) which is a push button tool for the automated validation of security protocols and achieved results demonstrating that they do not have any security flaws. Finally, a performance analysis of security refinement protocol analysis and an evaluation were conducted using Contiki and Cooja simulation tool. The results of the performance analysis showed that the security refinement was highly scalable and the memory was quite efficient as it needed only 72 bytes of memory to store the keys in the Wireless Sensor Network (WSN) device

A survey of IoT security based on a layered architecture of sensing and data analysis

The Internet of Things (IoT) is leading today’s digital transformation. Relying on a combination of technologies, protocols, and devices such as wireless sensors and newly developed wearable and implanted sensors, IoT is changing every aspect of daily life, especially recent applications in digital healthcare. IoT incorporates various kinds of hardware, communication protocols, and services. This IoT diversity can be viewed as a double-edged sword that provides comfort to users but can lead also to a large number of security threats and attacks. In this survey paper, a new compacted and optimized architecture for IoT is proposed based on five layers. Likewise, we propose a new classification of security threats and attacks based on new IoT architecture. The IoT architecture involves a physical perception layer, a network and protocol layer, a transport layer, an application layer, and a data and cloud services layer. First, the physical sensing layer incorporates the basic hardware used by IoT. Second, we highlight the various network and protocol technologies employed by IoT, and review the security threats and solutions. Transport protocols are exhibited and the security threats against them are discussed while providing common solutions. Then, the application layer involves application protocols and lightweight encryption algorithms for IoT. Finally, in the data and cloud services layer, the main important security features of IoT cloud platforms are addressed, involving confidentiality, integrity, authorization, authentication, and encryption protocols. The paper is concluded by presenting the open research issues and future directions towards securing IoT, including the lack of standardized lightweight encryption algorithms, the use of machine-learning algorithms to enhance security and the related challenges, the use of Blockchain to address security challenges in IoT, and the implications of IoT deployment in 5G and beyond