Spike-based VITE control with Dynamic Vision Sensor applied to an Arm Robot.

Spike-based motor control is very important in the field of robotics and also for the neuromorphic engineering community to bridge the gap between sensing / processing devices and motor control without losing the spike philosophy that enhances speed response and reduces power consumption. This paper shows an accurate neuro-inspired spike-based system composed of a DVS retina, a visual processing system that detects and tracks objects, and a SVITE motor control, where everything follows the spike-based philosophy. The control system is a spike version of the neuroinspired open loop VITE control algorithm implemented in a couple of FPGA boards: the first one runs the algorithm and the second one drives the motors with spikes. The robotic platform is a low cost arm with four degrees of freedom.Ministerio de Ciencia e Innovación TEC2009-10639-C04-02/01Ministerio de Economía y Competitividad TEC2012-37868-C04-02/0

A micropower centroiding vision processor

Published versio

A USB3.0 FPGA Event-based Filtering and Tracking Framework for Dynamic Vision Sensors

Dynamic vision sensors (DVS) are frame-free sensors with an asynchronous variable-rate output that is ideal for hard real-time dynamic vision applications under power and latency constraints. Post-processing of the digital sensor output can reduce sensor noise, extract low level features, and track objects using simple algorithms that have previously been implemented in software. In this paper we present an FPGA-based framework for event-based processing that allows uncorrelated-event noise removal and real-time tracking of multiple objects, with dynamic capabilities to adapt itself to fast or slow and large or small objects. This framework uses a new hardware platform based on a Lattice FPGA which filters the sensor output and which then transmits the results through a super-speed Cypress FX3 USB microcontroller interface to a host computer. The packets of events and timestamps are transmitted to the host computer at rates of 10 Mega events per second. Experimental results are presented that demonstrate a low latency of 10us for tracking and computing the center of mass of a detected object.Ministerio de Economía y Competitividad TEC2012-37868-C04-0

Low-Power Tracking Image Sensor Based on Biological Models of Attention

This paper presents implementation of a low-power tracking CMOS image sensor based on biological models of attention. The presented imager allows tracking of up to N salient targets in the field of view. Employing "smart" image sensor architecture, where all image processing is implemented on the sensor focal plane, the proposed imager allows reduction of the amount of data transmitted from the sensor array to external processing units and thus provides real time operation. The imager operation and architecture are based on the models taken from biological systems, where data sensed by many millions of receptors should be transmitted and processed in real time. The imager architecture is optimized to achieve low-power dissipation both in acquisition and tracking modes of operation. The tracking concept is presented, the system architecture is shown and the circuits description is discussed

CMOS-3D smart imager architectures for feature detection

This paper reports a multi-layered smart image sensor architecture for feature extraction based on detection of interest points. The architecture is conceived for 3-D integrated circuit technologies consisting of two layers (tiers) plus memory. The top tier includes sensing and processing circuitry aimed to perform Gaussian filtering and generate Gaussian pyramids in fully concurrent way. The circuitry in this tier operates in mixed-signal domain. It embeds in-pixel correlated double sampling, a switched-capacitor network for Gaussian pyramid generation, analog memories and a comparator for in-pixel analog-to-digital conversion. This tier can be further split into two for improved resolution; one containing the sensors and another containing a capacitor per sensor plus the mixed-signal processing circuitry. Regarding the bottom tier, it embeds digital circuitry entitled for the calculation of Harris, Hessian, and difference-of-Gaussian detectors. The overall system can hence be configured by the user to detect interest points by using the algorithm out of these three better suited to practical applications. The paper describes the different kind of algorithms featured and the circuitry employed at top and bottom tiers. The Gaussian pyramid is implemented with a switched-capacitor network in less than 50 μs, outperforming more conventional solutions.Xunta de Galicia 10PXIB206037PRMinisterio de Ciencia e Innovación TEC2009-12686, IPT-2011-1625-430000Office of Naval Research N00014111031

Integrated 2-D Optical Flow Sensor

I present a new focal-plane analog VLSI sensor that estimates optical flow in two visual dimensions. The chip significantly improves previous approaches both with respect to the applied model of optical flow estimation as well as the actual hardware implementation. Its distributed computational architecture consists of an array of locally connected motion units that collectively solve for the unique optimal optical flow estimate. The novel gradient-based motion model assumes visual motion to be translational, smooth and biased. The model guarantees that the estimation problem is computationally well-posed regardless of the visual input. Model parameters can be globally adjusted, leading to a rich output behavior. Varying the smoothness strength, for example, can provide a continuous spectrum of motion estimates, ranging from normal to global optical flow. Unlike approaches that rely on the explicit matching of brightness edges in space or time, the applied gradient-based model assures spatiotemporal continuity on visual information. The non-linear coupling of the individual motion units improves the resulting optical flow estimate because it reduces spatial smoothing across large velocity differences. Extended measurements of a 30x30 array prototype sensor under real-world conditions demonstrate the validity of the model and the robustness and functionality of the implementation