4,999 research outputs found
Recommended from our members
Diagnostic Applications for Micro-Synchrophasor Measurements
This report articulates and justifies the preliminary selection of diagnostic applications for data from micro-synchrophasors (µPMUs) in electric power distribution systems that will be further studied and developed within the scope of the three-year ARPA-e award titled Micro-synchrophasors for Distribution Systems
On cost-effective reuse of components in the design of complex reconfigurable systems
Design strategies that benefit from the reuse of system components can reduce costs while maintaining or increasing dependability—we use the term dependability to tie together reliability and availability. D3H2 (aDaptive Dependable Design for systems with Homogeneous and Heterogeneous redundancies) is a methodology that supports the design of complex systems with a focus on reconfiguration and component reuse. D3H2 systematizes the identification of heterogeneous redundancies and optimizes the design of fault detection and reconfiguration mechanisms, by enabling the analysis of design alternatives with respect to dependability and cost. In this paper, we extend D3H2 for application to repairable systems. The method is extended with analysis capabilities allowing dependability assessment of complex reconfigurable systems. Analysed scenarios include time-dependencies between failure events and the corresponding reconfiguration actions. We demonstrate how D3H2 can support decisions about fault detection and reconfiguration that seek to improve dependability while reducing costs via application to a realistic railway case study
Addressing Complexity and Intelligence in Systems Dependability Evaluation
Engineering and computing systems are increasingly complex, intelligent, and open adaptive. When it comes to the dependability evaluation of such systems, there are certain challenges posed by the characteristics of “complexity” and “intelligence”. The first aspect of complexity is the dependability modelling of large systems with many interconnected components and dynamic behaviours such as Priority, Sequencing and Repairs. To address this, the thesis proposes a novel hierarchical solution to dynamic fault tree analysis using Semi-Markov Processes. A second aspect of complexity is the environmental conditions that may impact dependability and their modelling. For instance, weather and logistics can influence maintenance actions and hence dependability of an offshore wind farm. The thesis proposes a semi-Markov-based maintenance model called “Butterfly Maintenance Model (BMM)” to model this complexity and accommodate it in dependability evaluation. A third aspect of complexity is the open nature of system of systems like swarms of drones which makes complete design-time dependability analysis infeasible. To address this aspect, the thesis proposes a dynamic dependability evaluation method using Fault Trees and Markov-Models at runtime.The challenge of “intelligence” arises because Machine Learning (ML) components do not exhibit programmed behaviour; their behaviour is learned from data. However, in traditional dependability analysis, systems are assumed to be programmed or designed. When a system has learned from data, then a distributional shift of operational data from training data may cause ML to behave incorrectly, e.g., misclassify objects. To address this, a new approach called SafeML is developed that uses statistical distance measures for monitoring the performance of ML against such distributional shifts. The thesis develops the proposed models, and evaluates them on case studies, highlighting improvements to the state-of-the-art, limitations and future work
NASA space station automation: AI-based technology review
Research and Development projects in automation for the Space Station are discussed. Artificial Intelligence (AI) based automation technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics. AI technology will also be developed for the servicing of satellites at the Space Station, system monitoring and diagnosis, space manufacturing, and the assembly of large space structures
Robot graphic simulation testbed
The objective of this research was twofold. First, the basic capabilities of ROBOSIM (graphical simulation system) were improved and extended by taking advantage of advanced graphic workstation technology and artificial intelligence programming techniques. Second, the scope of the graphic simulation testbed was extended to include general problems of Space Station automation. Hardware support for 3-D graphics and high processing performance make high resolution solid modeling, collision detection, and simulation of structural dynamics computationally feasible. The Space Station is a complex system with many interacting subsystems. Design and testing of automation concepts demand modeling of the affected processes, their interactions, and that of the proposed control systems. The automation testbed was designed to facilitate studies in Space Station automation concepts
Recommended from our members
Reliability and fault tolerance modelling of multiprocessor systems
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Reliability evaluation by analytic modelling constitute an important issue of designing a reliable multiprocessor system. In this thesis, a model for reliability and fault tolerance analysis of the interconnection network is presented, based on graph theory. Reliability and fault tolerance are considered as deterministic and probabilistic measures of connectivity.
Exact techniques for reliability evaluation fail for large multiprocessor systems because of the enormous computational resources required. Therefore, approximation techniques have to be used. Three approaches are proposed, the first by simplifying the symbolic expression of reliability; the
other two by applying a hierarchical decomposition to the system. All these
methods give results close to those obtained by exact techniques.Consejo Nacional de Ciencia y Tecnologia" (National Council for Science and Technology of Mexico) and "Instituto de Investigaciones Electricas" (Institute for Electrical Research
AI Solutions for MDS: Artificial Intelligence Techniques for Misuse Detection and Localisation in Telecommunication Environments
This report considers the application of Articial Intelligence (AI) techniques to
the problem of misuse detection and misuse localisation within telecommunications
environments. A broad survey of techniques is provided, that covers inter alia
rule based systems, model-based systems, case based reasoning, pattern matching,
clustering and feature extraction, articial neural networks, genetic algorithms, arti
cial immune systems, agent based systems, data mining and a variety of hybrid
approaches. The report then considers the central issue of event correlation, that
is at the heart of many misuse detection and localisation systems. The notion of
being able to infer misuse by the correlation of individual temporally distributed
events within a multiple data stream environment is explored, and a range of techniques,
covering model based approaches, `programmed' AI and machine learning
paradigms. It is found that, in general, correlation is best achieved via rule based approaches,
but that these suffer from a number of drawbacks, such as the difculty of
developing and maintaining an appropriate knowledge base, and the lack of ability
to generalise from known misuses to new unseen misuses. Two distinct approaches
are evident. One attempts to encode knowledge of known misuses, typically within
rules, and use this to screen events. This approach cannot generally detect misuses
for which it has not been programmed, i.e. it is prone to issuing false negatives.
The other attempts to `learn' the features of event patterns that constitute normal
behaviour, and, by observing patterns that do not match expected behaviour, detect
when a misuse has occurred. This approach is prone to issuing false positives,
i.e. inferring misuse from innocent patterns of behaviour that the system was not
trained to recognise. Contemporary approaches are seen to favour hybridisation,
often combining detection or localisation mechanisms for both abnormal and normal
behaviour, the former to capture known cases of misuse, the latter to capture
unknown cases. In some systems, these mechanisms even work together to update
each other to increase detection rates and lower false positive rates. It is concluded
that hybridisation offers the most promising future direction, but that a rule or state
based component is likely to remain, being the most natural approach to the correlation
of complex events. The challenge, then, is to mitigate the weaknesses of
canonical programmed systems such that learning, generalisation and adaptation
are more readily facilitated
Identification of Crash Fault & Value Fault for Random Network in Dynamic Environment
During the past few years distributed systems have been the focus of considerable research in computer science. Fault tolerance in distributed systems is a wide area with a significant body of literature that is vastly diverse in methodology and terminology. Fault tolerance is the ability of a system to perform its function correctly even in the presence of internal faults. An extensive methodology has been developed in this field over the past few years, and a number of fault-tolerant machines have been developed but most dealing with random hardware faults, while a smaller number deal with software, design and operator faults to varying degrees.
Our work mainly focuses on the simulation of the system that deals with software faults means the faults that occur because of the failure or error in the internal software component. Our work is restricted to distributed diagnosis in dynamic fault environment. Basically we have created different not-completely connected random networks with number of nodes ranging from 8 to 256.Then we have induced faults to these networks dynamically using poison distribution. Three different algorithms have been implemented to detect the faults and the comparison among these algorithms, based on delay latency and number of message exchanges, has been represented graphically. The software faults that we had dealt with are crash fault and value fault in a distributed system (not-completely connected network). Although many researches have been done in the crash fault area but very less work has been done in diagnosing the value faults in dynamic fault environment
- …