11 research outputs found
A study of the singularity locus in the joint space of planar parallel manipulators: special focus on cusps and nodes
Cusps and nodes on plane sections of the singularity locus in the joint space
of parallel manipulators play an important role in nonsingular assembly-mode
changing motions. This paper analyses in detail such points, both in the joint
space and in the workspace. It is shown that a cusp (resp. a node) defines a
point of tangency (resp. a crossing point) in the workspace between the
singular curves and the curves associated with the so-called characteristics
surfaces. The study is conducted on a planar 3-RPR manipulator for illustrative
purposes.Comment: 4th International Congress Design and Modeling of Mechanical Systems,
Sousse : Tunisia (2011
Distance-based formulations for the position analysis of kinematic chains
This thesis addresses the kinematic analysis of mechanisms, in particular, the position
analysis of kinematic chains, or linkages, that is, mechanisms with rigid bodies (links)
interconnected by kinematic pairs (joints). This problem, of completely geometrical
nature, consists in finding the feasible assembly modes that a kinematic chain can adopt.
An assembly mode is a possible relative transformation between the links of a kinematic
chain. When an assignment of positions and orientations is made for all links with
respect to a given reference frame, an assembly mode is called a configuration. The
methods reported in the literature for solving the position analysis of kinematic chains
can be classified as graphical, analytical, or numerical.
The graphical approaches are mostly geometrical and designed to solve particular
problems. The analytical and numerical methods deal, in general, with kinematic chains
of any topology and translate the original geometric problem into a system of kinematic analysis of all the Assur kinematic chains resulting from replacing some of its revolute
joints by slider joints. Thus, it is concluded that the polynomials of all fully-parallel
planar robots can be derived directly from that of the widely known 3-RPR robot. In
addition to these results, this thesis also presents an efficient procedure, based on distance
and oriented area constraints, and geometrical arguments, to trace coupler curves
of pin-jointed Gr¨ubler kinematic chains. All these techniques and results together are
contributions to theoretical kinematics of mechanisms, robot kinematics, and distance
plane geometry.
equations that defines the location of each link based, mainly, on independent loop
equations. In the analytical approaches, the system of kinematic equations is reduced
to a polynomial, known as the characteristic polynomial of the linkage, using different
elimination methods —e.g., Gr¨obner bases or resultant techniques. In the numerical
approaches, the system of kinematic equations is solved using, for instance, polynomial
continuation or interval-based procedures.
In any case, the use of independent loop equations to solve the position analysis
of kinematic chains, almost a standard in kinematics of mechanisms, has seldom been
questioned despite the resulting system of kinematic equations becomes quite involved
even for simple linkages. Moreover, stating the position analysis of kinematic chains
directly in terms of poses, with or without using independent loop equations, introduces
two major disadvantages: arbitrary reference frames has to be included, and all formulas
involve translations and rotations simultaneously. This thesis departs from this standard
approach by, instead of directly computing Cartesian locations, expressing the original
position problem as a system of distance-based constraints that are then solved using
analytical and numerical procedures adapted to their particularities.
In favor of developing the basics and theory of the proposed approach, this thesis
focuses on the study of the most fundamental planar kinematic chains, namely, Baranov
trusses, Assur kinematic chains, and pin-jointed Gr¨ubler kinematic chains. The results
obtained have shown that the novel developed techniques are promising tools for the
position analysis of kinematic chains and related problems. For example, using these
techniques, the characteristic polynomials of most of the cataloged Baranov trusses can
be obtained without relying on variable eliminations or trigonometric substitutions and
using no other tools than elementary algebra. An outcome in clear contrast with the
complex variable eliminations require when independent loop equations are used to tackle
the problem.
The impact of the above result is actually greater because it is shown that the
characteristic polynomial of a Baranov truss, derived using the proposed distance-based
techniques, contains all the necessary and sufficient information for solving the positionEsta tesis aborda el problema de análisis de posición de cadenas cinemáticas, mecanismos con cuerpos rígidos (enlaces)
interconectados por pares cinemáticos (articulaciones). Este problema, de naturaleza geométrica, consiste en encontrar los
modos de ensamblaje factibles que una cadena cinemática puede adoptar. Un modo de ensamblaje es una transformación
relativa posible entre los enlaces de una cadena cinemática. Los métodos reportados en la literatura para la solución del análisis
de posición de cadenas cinemáticas se pueden clasificar como gráficos, analíticos o numéricos.
Los enfoques gráficos son geométricos y se diseñan para resolver problemas particulares. Los métodos analíticos y numéricos
tratan con cadenas cinemáticas de cualquier topología y traducen el problema geométrico original en un sistema de ecuaciones
cinemáticas que define la ubicación de cada enlace, basado generalmente en ecuaciones de bucle independientes. En los
enfoques analíticos, el sistema de ecuaciones cinemáticas se reduce a un polinomio, conocido como el polinomio característico
de la cadena cinemática, utilizando diferentes métodos de eliminación. En los métodos numéricos, el sistema se resuelve
utilizando, por ejemplo, la continuación polinomial o procedimientos basados en intervalos.
En cualquier caso, el uso de ecuaciones de bucle independientes, un estándar en cinemática de mecanismos, rara vez ha sido
cuestionado a pesar de que el sistema resultante de ecuaciones es bastante complicado, incluso para cadenas simples. Por otra
parte, establecer el análisis de la posición de cadenas cinemáticas directamente en términos de poses, con o sin el uso de
ecuaciones de bucle independientes, presenta dos inconvenientes: sistemas de referencia arbitrarios deben ser introducidos, y
todas las fórmulas implican traslaciones y rotaciones de forma simultánea. Esta tesis se aparta de este enfoque estándar
expresando el problema de posición original como un sistema de restricciones basadas en distancias, en lugar de directamente
calcular posiciones cartesianas. Estas restricciones son posteriormente resueltas con procedimientos analíticos y numéricos
adaptados a sus particularidades.
Con el propósito de desarrollar los conceptos básicos y la teoría del enfoque propuesto, esta tesis se centra en el estudio de las
cadenas cinemáticas planas más fundamentales, a saber, estructuras de Baranov, cadenas cinemáticas de Assur, y cadenas
cinemáticas de Grübler. Los resultados obtenidos han demostrado que las técnicas desarrolladas son herramientas
prometedoras para el análisis de posición de cadenas cinemáticas y problemas relacionados. Por ejemplo, usando dichas
técnicas, los polinomios característicos de la mayoría de las estructuras de Baranov catalogadas se puede obtener sin realizar
eliminaciones de variables o sustituciones trigonométricas, y utilizando solo álgebra elemental. Un resultado en claro contraste
con las complejas eliminaciones de variables que se requieren cuando se utilizan ecuaciones de bucle independientes.
El impacto del resultado anterior es mayor porque se demuestra que el polinomio característico de una estructura de Baranov,
derivado con las técnicas propuestas, contiene toda la información necesaria y suficiente para resolver el análisis de posición de
las cadenas cinemáticas de Assur que resultan de la sustitución de algunas de sus articulaciones de revolución por
articulaciones prismáticas. De esta forma, se concluye que los polinomios de todos los robots planares totalmente paralelos se
pueden derivar directamente del polinomio característico del conocido robot 3-RPR. Adicionalmente, se presenta un
procedimiento eficaz, basado en restricciones de distancias y áreas orientadas, y argumentos geométricos, para trazar curvas
de acoplador de cadenas cinemáticas de Grübler. En conjunto, todas estas técnicas y resultados constituyen contribuciones a la
cinemática teórica de mecanismos, la cinemática de robots, y la geometría plana de distancias.
Barcelona 13
Workspace, Joint space and Singularities of a family of Delta-Like Robot
International audienceThis paper presents the workspace, the joint space and the singularities of a family of delta-like parallel robots by using algebraic tools. The different functions of SIROPA library are introduced, which is used to induce an estimation about the complexity in representing the singularities in the workspace and the joint space. A Groebner based elimination is used to compute the singularities of the manipulator and a Cylindrical Algebraic Decomposition algorithm is used to study the workspace and the joint space. From these algebraic objects, we propose some certified three-dimensional plotting describing the shape of workspace and of the joint space which will help the engineers or researchers to decide the most suited configuration of the manipulator they should use for a given task. Also, the different parameters associated with the complexity of the serial and parallel singularities are tabulated, which further enhance the selection of the different configuration of the manipulator by comparing the complexity of the singularity equations
On the Dynamic Properties of Flexible Parallel Manipulators in the Presence of Type 2 Singularities
International audienceIn the present paper, we expand information about the conditions for passing through Type 2 singular configurations of a parallel manipulator. It is shown that any parallel manipulator can cross the singular configurations via an optimal control permitting the favourable force distribution, i.e. the wrench applied on the end-effector by the legs and external efforts must be reciprocal to the twist along the direction of the uncontrollable motion. The previous studies have proposed the optimal control conditions for the manipulators with rigid links and flexible actuated joints. The different polynomial laws have been obtained and validated for each examined case. The present study considers the conditions for passing through Type 2 singular configurations for the parallel manipulators with flexible links. By computing the inverse dynamic model of a general flexible parallel robot, the necessary conditions for passing through Type 2 singular configurations are deduced. The suggested approach is illustrated by a 5R parallel manipulator with flexible elements and joints. It is shown that a 16 th order polynomial law is necessary for the optimal force generation. The obtained results are validated by numerical simulations carried out using the software ADAMS
Distance-based formulations for the position analysis of kinematic chains
Tesis presentada por Nicolás Rojas a través del programa de doctorado "Automàtica, Robòtica i Visió" y realizada en el Institut de Robòtica i Informàtica Industrial, CSIC-UPC.This thesis addresses the kinematic analysis of mechanisms, in particular, the position analysis of kinematic chains, or linkages, that is, mechanisms with rigid bodies (links) interconnected by kinematic pairs (joints). This problem, of completely geometrical nature, consists in finding the feasible assembly modes that a kinematic chain can adopt. An assembly mode is a possible relative transformation between the links of a kinematic chain. When an assignment of positions and orientations is made for all links with respect to a given reference frame, an assembly mode is called a configuration. The methods reported in the literature for solving the position analysis of kinematic chains can be classified as graphical, analytical, or numerical. The graphical approaches are mostly geometrical and designed to solve particular problems. The analytical and numerical methods deal, in general, with kinematic chains of any topology and translate the original geometric problem into a system of kinematic analysis of all the Assur kinematic chains resulting from replacing some of its revolute joints by slider joints. Thus, it is concluded that the polynomials of all fully-parallel planar robots can be derived directly from that of the widely known 3-RPR robot. In addition to these results, this thesis also presents an efficient procedure, based on distance and oriented area constraints, and geometrical arguments, to trace coupler curves of pin-jointed Gr¨ubler kinematic chains. All these techniques and results together are contributions to theoretical kinematics of mechanisms, robot kinematics, and distance plane geometry. equations that defines the location of each link based, mainly, on independent loop equations. In the analytical approaches, the system of kinematic equations is reduced to a polynomial, known as the characteristic polynomial of the linkage, using different elimination methods —e.g., Gr¨obner bases or resultant techniques. In the numerical approaches, the system of kinematic equations is solved using, for instance, polynomial continuation or interval-based procedures. In any case, the use of independent loop equations to solve the position analysis of kinematic chains, almost a standard in kinematics of mechanisms, has seldom been questioned despite the resulting system of kinematic equations becomes quite involved even for simple linkages. Moreover, stating the position analysis of kinematic chains directly in terms of poses, with or without using independent loop equations, introduces two major disadvantages: arbitrary reference frames has to be included, and all formulas involve translations and rotations simultaneously. This thesis departs from this standard approach by, instead of directly computing Cartesian locations, expressing the original position problem as a system of distance-based constraints that are then solved using analytical and numerical procedures adapted to their particularities.In favor of developing the basics and theory of the proposed approach, this thesis focuses on the study of the most fundamental planar kinematic chains, namely, Baranov trusses, Assur kinematic chains, and pin-jointed Gr¨ubler kinematic chains. The results obtained have shown that the novel developed techniques are promising tools for the position analysis of kinematic chains and related problems. For example, using these techniques, the characteristic polynomials of most of the cataloged Baranov trusses can be obtained without relying on variable eliminations or trigonometric substitutions and using no other tools than elementary algebra. An outcome in clear contrast with the complex variable eliminations require when independent loop equations are used to tackle the problem. The impact of the above result is actually greater because it is shown that the characteristic polynomial of a Baranov truss, derived using the proposed distance-based techniques, contains all the necessary and sufficient information for solving the positionMy doctoral studies and the research reported in this thesis have been partially developed under the activities of: The Catalonian Reference Network in Advanced Production Technologies (XaRTAP), and have been partially supported by: The Colombian Ministry of Communications and Colfuturo through the Information and Communications Technology (ICT) National Plan of Colombia,.Peer Reviewe
Advances in Robot Kinematics : Proceedings of the 15th international conference on Advances in Robot Kinematics
International audienceThe motion of mechanisms, kinematics, is one of the most fundamental aspect of robot design, analysis and control but is also relevant to other scientific domains such as biome- chanics, molecular biology, . . . . The series of books on Advances in Robot Kinematics (ARK) report the latest achievement in this field. ARK has a long history as the first book was published in 1991 and since then new issues have been published every 2 years. Each book is the follow-up of a single-track symposium in which the participants exchange their results and opinions in a meeting that bring together the best of world’s researchers and scientists together with young students. Since 1992 the ARK symposia have come under the patronage of the International Federation for the Promotion of Machine Science-IFToMM.This book is the 13th in the series and is the result of peer-review process intended to select the newest and most original achievements in this field. For the first time the articles of this symposium will be published in a green open-access archive to favor free dissemination of the results. However the book will also be o↵ered as a on-demand printed book.The papers proposed in this book show that robot kinematics is an exciting domain with an immense number of research challenges that go well beyond the field of robotics.The last symposium related with this book was organized by the French National Re- search Institute in Computer Science and Control Theory (INRIA) in Grasse, France