838 research outputs found
SoundCompass: a distributed MEMS microphone array-based sensor for sound source localization
Sound source localization is a well-researched subject with applications ranging from localizing sniper fire in urban battlefields to cataloging wildlife in rural areas. One critical application is the localization of noise pollution sources in urban environments, due to an increasing body of evidence linking noise pollution to adverse effects on human health. Current noise mapping techniques often fail to accurately identify noise pollution sources, because they rely on the interpolation of a limited number of scattered sound sensors. Aiming to produce accurate noise pollution maps, we developed the SoundCompass, a low-cost sound sensor capable of measuring local noise levels and sound field directionality. Our first prototype is composed of a sensor array of 52 Microelectromechanical systems (MEMS) microphones, an inertial measuring unit and a low-power field-programmable gate array (FPGA). This article presents the SoundCompass's hardware and firmware design together with a data fusion technique that exploits the sensing capabilities of the SoundCompass in a wireless sensor network to localize noise pollution sources. Live tests produced a sound source localization accuracy of a few centimeters in a 25-m2 anechoic chamber, while simulation results accurately located up to five broadband sound sources in a 10,000-m2 open field
Controllable radio interference for experimental and testing purposes in wireless sensor networks
Abstract—We address the problem of generating customized, controlled interference for experimental and testing purposes in Wireless Sensor Networks. The known coexistence problems between electronic devices sharing the same ISM radio band drive the design of new solutions to minimize interference. The validation of these techniques and the assessment of protocols under external interference require the creation of reproducible and well-controlled interference patterns on real nodes, a nontrivial and time-consuming task. In this paper, we study methods to generate a precisely adjustable level of interference on a specific channel, with lowcost equipment and rapid calibration. We focus our work on the platforms carrying the CC2420 radio chip and we show that, by setting such transceiver in special mode, we can quickly and easily generate repeatable and precise patterns of interference. We show how this tool can be extremely useful for researchers to quickly investigate the behaviour of sensor network protocols and applications under different patterns of interference, and we further evaluate its performance
A cyber-physical approach to combined HW-SW monitoring for improving energy efficiency in data centers
High-Performance Computing, Cloud computing and next-generation applications such e-Health or Smart Cities have dramatically increased the computational demand of Data Centers. The huge energy consumption, increasing levels of CO2 and the economic costs of these facilities represent a challenge for industry and researchers alike. Recent research trends propose the usage of holistic optimization techniques to jointly minimize Data Center computational and cooling costs from a multilevel perspective. This paper presents an analysis on the parameters needed to integrate the Data Center in a holistic optimization framework and leverages the usage of Cyber-Physical systems to gather workload, server and environmental data via software techniques and by deploying a non-intrusive Wireless Sensor Net- work (WSN). This solution tackles data sampling, retrieval and storage from a reconfigurable perspective, reducing the amount of data generated for optimization by a 68% without information loss, doubling the lifetime of the WSN nodes and allowing runtime energy minimization techniques in a real scenario
A centralized localization algorithm for prolonging the lifetime of wireless sensor networks using particle swarm optimization in the existence of obstacles
The evolution in micro-electro-mechanical systems technology (MEMS) has
triggered the need for the development of wireless sensor network (WSN). These
wireless sensor nodes has been used in many applications at many areas. One of the
main issues in WSN is the energy availability, which is always a constraint. In a
previous research, a relocating algorithm for mobile sensor network had been
introduced and the goal was to save energy and prolong the lifetime of the sensor
networks using Particle Swarm Optimization (PSO) where both of sensing radius and
travelled distance had been optimized in order to save energy in long-term and shortterm.
Yet, the previous research did not take into account obstacles’ existence in the
field and this will cause the sensor nodes to consume more power if obstacles are
exists in the sensing field. In this project, the same centralized relocating algorithm
from the previous research has been used where 15 mobile sensors deployed
randomly in a field of 100 meter by 100 meter where these sensors has been
deployed one time in a field that obstacles does not exist (case 1) and another time in
a field that obstacles existence has been taken into account (case 2), in which these
obstacles has been pre-defined positions, where these two cases applied into two
different algorithms, which are the original algorithm of a previous research and the
modified algorithm of this thesis. Particle Swarm Optimization has been used in the
proposed algorithm to minimize the fitness function. Voronoi diagram has also used
in order to ensure that the mobile sensors cover the whole sensing field. In this
project, the objectives will be mainly focus on the travelling distance, which is the
mobility module, of the mobile sensors in the network because the distance that the
sensor node travels, will consume too much power from this node and this will lead
to shortening the lifetime of the sensor network. So, the travelling distance, power
consumption and lifetime of the network will be calculated in both cases for original
algorithm and modified algorithm, which is a modified deployment algorithm, and compared between them. Moreover, the maximum sensing range is calculated, which
is 30 meter, by using the binary sensing model even though the sensing module does
not consume too much power compared to the mobility module. Finally, the
comparison of the results in the original method will show that this algorithm is not
suitable for an environment where obstacle exist because sensors will consume too
much power compared to the sensors that deployed in environment that free of
obstacles. While the results of the modified algorithm of this research will be more
suitable for both environments, that is environment where obstacles are not exist and
environment where obstacles are exist, because sensors in this algorithm .will
consume almost the same amount of power at both of these environments
Key management issues in wireless sensor networks : current proposals and future developments
Author name used in this publication: Henry C. B. Chan2007-2008 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
- …