22,643 research outputs found
Low-complexity distributed issue queue
As technology evolves, power density significantly increases and cooling systems become more complex and expensive. The issue logic is one of the processor hotspots and, at the same time, its latency is crucial for the processor performance. We present a low-complexity FP issue logic (MB/spl I.bar/distr) that achieves high performance with small energy requirements. The MB/spl I.bar/distr scheme is based on classifying instructions and dispatching them into a set of queues depending on their data dependences. These instructions are selected for issuing based on an estimation of when their operands will be available, so the conventional wakeup activity is not required. Additionally, the functional units are distributed across the different queues. The energy required by the proposed scheme is substantially lower than that required by a conventional issue design, even if the latter has the ability of waking-up only unready operands. MB/spl I.bar/distr scheme reduces the energy-delay product by 35% and the energy-delay product by 18% with respect to a state-of-the-art approach.Peer ReviewedPostprint (published version
Energy-efficient wireless communication
In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters
A Survey on Delay-Aware Resource Control for Wireless Systems --- Large Deviation Theory, Stochastic Lyapunov Drift and Distributed Stochastic Learning
In this tutorial paper, a comprehensive survey is given on several major
systematic approaches in dealing with delay-aware control problems, namely the
equivalent rate constraint approach, the Lyapunov stability drift approach and
the approximate Markov Decision Process (MDP) approach using stochastic
learning. These approaches essentially embrace most of the existing literature
regarding delay-aware resource control in wireless systems. They have their
relative pros and cons in terms of performance, complexity and implementation
issues. For each of the approaches, the problem setup, the general solution and
the design methodology are discussed. Applications of these approaches to
delay-aware resource allocation are illustrated with examples in single-hop
wireless networks. Furthermore, recent results regarding delay-aware multi-hop
routing designs in general multi-hop networks are elaborated. Finally, the
delay performance of the various approaches are compared through simulations
using an example of the uplink OFDMA systems.Comment: 58 pages, 8 figures; IEEE Transactions on Information Theory, 201
An Adaptive Fault-Tolerant Communication Scheme for Body Sensor Networks
A high degree of reliability for critical data transmission is required in
body sensor networks (BSNs). However, BSNs are usually vulnerable to channel
impairments due to body fading effect and RF interference, which may
potentially cause data transmission to be unreliable. In this paper, an
adaptive and flexible fault-tolerant communication scheme for BSNs, namely
AFTCS, is proposed. AFTCS adopts a channel bandwidth reservation strategy to
provide reliable data transmission when channel impairments occur. In order to
fulfill the reliability requirements of critical sensors, fault-tolerant
priority and queue are employed to adaptively adjust the channel bandwidth
allocation. Simulation results show that AFTCS can alleviate the effect of
channel impairments, while yielding lower packet loss rate and latency for
critical sensors at runtime.Comment: 10 figures, 19 page
Variation Resilient Adaptive Controller for Subthreshold Circuits
Subthreshold logic is showing good promise as a viable ultra-low-power circuit design technique for power-limited applications. For this design technique to gain widespread adoption, one of the most pressing concerns is how to improve the robustness of subthreshold logic to process and temperature variations. We propose a variation resilient adaptive controller for subthreshold circuits with the following novel features: new sensor based on time-to-digital converter for capturing the variations accurately as digital signatures, and an all-digital DC-DC converter incorporating the sensor capable of generating an operating operating Vdd from 0V to 1.2V with a resolution of 18.75mV, suitable for subthreshold circuit operation. The benefits of the proposed controller is reflected with energy improvement of up to 55% compared to when no controller is employed. The detailed implementation and validation of the proposed controller is discussed
Frontend frequency-voltage adaptation for optimal energy-delay/sup 2/
In this paper, we present a clustered, multiple-clock domain (CMCD) microarchitecture that combines the benefits of both clustering and globally asynchronous locally synchronous (GALS) designs. We also present a mechanism for dynamically adapting the frequency and voltage of the frontend of the CMCD with the goal to optimize the energy-delay/sup 2/ product (ED2P). Our mechanism has minimal hardware cost, is entirely self-adjustable, does not depend on any thresholds, and achieves results close to optimal. We evaluate it on 16 SPEC 2000 applications and report 17.5% ED2P reduction on average (80% of the upper bound).Peer ReviewedPostprint (published version
- âŠ