12,215 research outputs found
FEA modeling of orthogonal cutting of steel: a review
Orthogonal cutting is probably the most studied machining operation for metals. Its simulation with the Finite Element Analysis (FEA) method is of paramount academic interest. 2D models, and to a lesser extent 3D models, have been developed to predict cutting forces, chip formation, heat generation and temperature fields, residual stress distribution and tool wear. This paper first presents a brief review of scientific literature with focus on FEA modelling of the orthogonal cutting process for steels. Following, emphasis is put on the building blocks of the simulation model, such as the formulation of the mechanical problem, the material constitutive model, the friction models and damage laws
From 3D Models to 3D Prints: an Overview of the Processing Pipeline
Due to the wide diffusion of 3D printing technologies, geometric algorithms
for Additive Manufacturing are being invented at an impressive speed. Each
single step, in particular along the Process Planning pipeline, can now count
on dozens of methods that prepare the 3D model for fabrication, while analysing
and optimizing geometry and machine instructions for various objectives. This
report provides a classification of this huge state of the art, and elicits the
relation between each single algorithm and a list of desirable objectives
during Process Planning. The objectives themselves are listed and discussed,
along with possible needs for tradeoffs. Additive Manufacturing technologies
are broadly categorized to explicitly relate classes of devices and supported
features. Finally, this report offers an analysis of the state of the art while
discussing open and challenging problems from both an academic and an
industrial perspective.Comment: European Union (EU); Horizon 2020; H2020-FoF-2015; RIA - Research and
Innovation action; Grant agreement N. 68044
Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches
Thin-wall parts are common in the aeronautical sector. However, their machining presents
serious challenges such as vibrations and part deflections. To deal with these challenges, di erent
approaches have been followed in recent years. This work presents the state of the art of thin-wall
light-alloy machining, analyzing the problems related to each type of thin-wall parts, exposing the
causes of both instability and deformation through analytical models, summarizing the computational
techniques used, and presenting the solutions proposed by di erent authors from an industrial point
of view. Finally, some further research lines are proposed
Eco-efficient process based on conventional machining as an alternative technology to chemical milling of aeronautical metal skin panels
El fresado químico es un proceso diseñado para la reducción de peso de pieles metálicas que, a
pesar de los problemas medioambientales asociados, se utiliza en la industria aeronáutica desde los
años 50. Entre sus ventajas figuran el cumplimiento de las estrictas tolerancias de diseño de piezas
aeroespaciales y que pese a ser un proceso de mecanizado, no induce tensiones residuales. Sin
embargo, el fresado químico es una tecnología contaminante y costosa que tiende a ser sustituida.
Gracias a los avances realizados en el mecanizado, la tecnología de fresado convencional permite
alcanzar las tolerancias requeridas siempre y cuando se consigan evitar las vibraciones y la flexión
de la pieza, ambas relacionadas con los parámetros del proceso y con los sistemas de utillaje
empleados.
Esta tesis analiza las causas de la inestabilidad del corte y la deformación de las piezas a través
de una revisión bibliográfica que cubre los modelos analíticos, las técnicas computacionales y las
soluciones industriales en estudio actualmente. En ella, se aprecia cómo los modelos analíticos y las
soluciones computacionales y de simulación se centran principalmente en la predicción off-line de
vibraciones y de posibles flexiones de la pieza. Sin embargo, un enfoque más industrial ha llevado al
diseño de sistemas de fijación, utillajes, amortiguadores basados en actuadores, sistemas de rigidez
y controles adaptativos apoyados en simulaciones o en la selección estadística de parámetros.
Además se han desarrollado distintas soluciones CAM basadas en la aplicación de gemelos virtuales.
En la revisión bibliográfica se han encontrado pocos documentos relativos a pieles y suelos
delgados por lo que se ha estudiado experimentalmente el efecto de los parámetros de corte en su
mecanizado. Este conjunto de experimentos ha demostrado que, pese a usar un sistema que
aseguraba la rigidez de la pieza, las pieles se comportaban de forma diferente a un sólido rígido en
términos de fuerzas de mecanizado cuando se utilizaban velocidades de corte cercanas a la alta
velocidad. También se ha verificado que todas las muestras mecanizadas entraban dentro de
tolerancia en cuanto a la rugosidad de la pieza. Paralelamente, se ha comprobado que la correcta
selección de parámetros de mecanizado puede reducir las fuerzas de corte y las tolerancias del
proceso hasta un 20% y un 40%, respectivamente. Estos datos pueden tener aplicación industrial en
la simplificación de los sistemas de amarre o en el incremento de la eficiencia del proceso.
Este proceso también puede mejorarse incrementando la vida de la herramienta al utilizar
fluidos de corte. Una correcta lubricación puede reducir la temperatura del proceso y las tensiones
residuales inducidas a la pieza. Con este objetivo, se han desarrollado diferentes lubricantes, basados
en el uso de líquidos iónicos (IL) y se han comparado con el comportamiento tribológico del par de
contacto en seco y con una taladrina comercial. Los resultados obtenidos utilizando 1 wt% de los
líquidos iónicos en un tribómetro tipo pin-on-disk demuestran que el IL no halogenado reduce
significativamente el desgaste y la fricción entre el aluminio, material a mecanizar, y el carburo de
tungsteno, material de la herramienta, eliminando casi toda la adhesión del aluminio sobre el pin, lo
que puede incrementar considerablemente la vida de la herramienta.Chemical milling is a process designed to reduce the weight of metals skin panels. This process
has been used since 1950s in the aerospace industry despite its environmental concern. Among its
advantages, chemical milling does not induce residual stress and parts meet the required tolerances.
However, this process is a pollutant and costly technology. Thanks to the last advances in
conventional milling, machining processes can achieve similar quality results meanwhile vibration
and part deflection are avoided. Both problems are usually related to the cutting parameters and the
workholding.
This thesis analyses the causes of the cutting instability and part deformation through a literature
review that covers analytical models, computational techniques and industrial solutions. Analytics
and computational solutions are mainly focused on chatter and deflection prediction and industrial
approaches are focused on the design of workholdings, fixtures, damping actuators, stiffening
devices, adaptive control systems based on simulations and the statistical parameters selection, and
CAM solutions combined with the use of virtual twins applications.
In this literature review, few research works about thin-plates and thin-floors is found so the
effect of the cutting parameters is also studied experimentally. These experiments confirm that even
using rigid workholdings, the behavior of the part is different to a rigid body at high speed machining.
On the one hand, roughness values meet the required tolerances under every set of the tested
parameters. On the other hand, a proper parameter selection reduces the cutting forces and process
tolerances by up to 20% and 40%, respectively. This fact can be industrially used to simplify
workholding and increase the machine efficiency.
Another way to improve the process efficiency is to increase tool life by using cutting fluids.
Their use can also decrease the temperature of the process and the induced stresses. For this purpose,
different water-based lubricants containing three types of Ionic Liquids (IL) are compared to dry and
commercial cutting fluid conditions by studying their tribological behavior. Pin on disk tests prove
that just 1wt% of one of the halogen-free ILs significantly reduces wear and friction between both
materials, aluminum and tungsten carbide. In fact, no wear scar is noticed on the ball when one of
the ILs is used, which, therefore, could considerably increase tool life
A robust algorithm for implicit description of immersed geometries within a background mesh
The paper presents a robust algorithm, which allows to implicitly describe and track immersed geometries within a background mesh. The background mesh is assumed to be unstructured and discretized by tetrahedrons. The contained geometry is assumed to be given as triangulated surface. Within the background mesh, the immersed geometry is described implicitly using a discontinuous distance function based on a level-set approach. This distance function allows to consider both, “double-sided” geometries like membrane or shell structures, and “single-sided” objects for which an enclosed volume is univocally defined. For the second case, the discontinuous distance function is complemented by a continuous signed distance function, whereas ray casting is applied to identify the closed volume regions. Furthermore, adaptive mesh refinement is employed to provide the necessary resolution of the background mesh. The proposed algorithm can handle arbitrarily complicated geometries, possibly containing modeling errors (i.e., gaps, overlaps or a non-unique orientation of surface normals). Another important advantage of the algorithm is the embarrassingly parallel nature of its operations. This characteristic allows for a straightforward parallelization using MPI. All developments were implemented within the open source framework “KratosMultiphysics” and are available under the BSD license. The capabilities of the implementation are demonstrated with various application examples involving practice-oriented geometries. The results finally show, that the algorithm is able to describe most complicated geometries within a background mesh, whereas the approximation quality may be directly controlled by mesh refinement.Peer ReviewedPostprint (published version
ColDICE: a parallel Vlasov-Poisson solver using moving adaptive simplicial tessellation
Resolving numerically Vlasov-Poisson equations for initially cold systems can
be reduced to following the evolution of a three-dimensional sheet evolving in
six-dimensional phase-space. We describe a public parallel numerical algorithm
consisting in representing the phase-space sheet with a conforming,
self-adaptive simplicial tessellation of which the vertices follow the
Lagrangian equations of motion. The algorithm is implemented both in six- and
four-dimensional phase-space. Refinement of the tessellation mesh is performed
using the bisection method and a local representation of the phase-space sheet
at second order relying on additional tracers created when needed at runtime.
In order to preserve in the best way the Hamiltonian nature of the system,
refinement is anisotropic and constrained by measurements of local Poincar\'e
invariants. Resolution of Poisson equation is performed using the fast Fourier
method on a regular rectangular grid, similarly to particle in cells codes. To
compute the density projected onto this grid, the intersection of the
tessellation and the grid is calculated using the method of Franklin and
Kankanhalli (1993) generalised to linear order. As preliminary tests of the
code, we study in four dimensional phase-space the evolution of an initially
small patch in a chaotic potential and the cosmological collapse of a
fluctuation composed of two sinusoidal waves. We also perform a "warm" dark
matter simulation in six-dimensional phase-space that we use to check the
parallel scaling of the code.Comment: Code and illustration movies available at:
http://www.vlasix.org/index.php?n=Main.ColDICE - Article submitted to Journal
of Computational Physic
- …