An Active Safety System for Low-Speed Bus Braking Assistance

Accidents in which buses or coaches are involved cause thousands of injuries and fatalities every year. To reduce their number and severity, the paper describes an Advanced Driver Assistance Systems (ADAS) based on a haptic throttle pedal and emergency braking. It also proposes a computationally efficient algorithm with a methodology based on three main concepts: a simplified but accurate vehicle model; an efficient collision detection system considering driver's intention and pedestrians wandering around the vehicle; and a risk evaluation system to generate warnings and emergency braking signals. Finally, the performance of the proposed ADAS is validated using a driving simulation cabin with a very realistic urban scenario and original elements from real buses. The results show a statistically significant improvement in safety, as the number of collisions and high risk situations are clearly minimized, reaction time to press the brake pedal is improved and time to collision increased in emergency situations. Implementation of the proposed ADAS into city buses would potentially improve safety, reducing the frequency and severity of accidents with pedestrians.This work was supported in part by Ministry of Science and Innovation of Spain through the SAFEBUS Project "Sistemas Avanzados de Seguridad Integral en Autobuses" under Grant IPT-2011-1165-370000 and the SAFETRANS Project "Sistemas de Conduccion Segura de Vehiculos de Transporte de Pasajeros y Materiales con Asistencia Haptica/Audiovisual e Interfaces Biomedicas" under Grant DPI2013-42302-R and in part by the Generalitat Valenciana, Programa VALi+d (ACIF/2010/206). The Associate Editor for this paper was E. Kosmatopoulos.Girbés, V.; Armesto Ángel, L.; Dols Ruiz, JF.; Tornero Montserrat, J. (2017). An Active Safety System for Low-Speed Bus Braking Assistance. IEEE Transactions on Intelligent Transportation Systems. 18(2):377-387. https://doi.org/10.1109/TITS.2016.2573921S37738718

Haptic Feedback to Assist Bus Drivers for Pedestrian Safety at Low Speed

Buses and coaches are massive Passenger Transportation Systems (PTS), because they represent more than half of land PTS in the European Union. Despite of that, bus accident figures are lower than other means of transport, but its size and weight increase the severity of accidents in which buses are involved, even at low speed. In urban scenarios, turnings and manoeuvres around bus stops are the main causes of accidents, mostly due to low visibility, blind spots or driver s distractions. Therefore, there is an increasing interest in developing driving assistance systems to avoid these situations, among others. However, even though there are some solutions on the market, they are not meant to work in urban areas at low speed and with the sole purpose of preventing collisions with pedestrians. In this sense, the paper proposes an active safety system for buses in manoeuvres at low speed. The safety system consists of haptic feedback devices together with collision avoidance and risk evaluation systems based on detected people nearby the bus. The performance of the active safety system has been validated in a simulated urban scenario. Our results show that driver s reaction time is reduced and time to collision increased due to the proposed low-speed active safety system. In particular, it is shown that there is a reduction in the number of high risk cases and collisions, which implies a considerable improvement in safety terms. In addition to this, a brief discussion about current regulations for innovative safety systems on a real vehicles is carried out.This paper has been funded by Ministerio de Ciencia e Innovacion (Spain) through the projects "Sistemas Avanzados de Seguridad Integral en Autobuses (SAFEBUS)" (IPT-2011-1165-370000) and "Sistemas de Conduccion Segura de Vehiculos de Transporte de Pasajeros y Materiales con Asistencia Haptica/Audiovisual e Interfaces Biomedicas (SAFETRANS)" (DPI2013-42302-R). This work was also supported by Programa VALi+d (Generalitat Valenciana). The authors wish to thank Jose Luis Sanchez Carrascosa for his dedication and commitment to the project and thank to Ana Isabel Sanchez Galdon for her valuable help regarding ANOVA analysis.Girbés, V.; Armesto Ángel, L.; Dols Ruiz, JF.; Tornero Montserrat, J. (2016). Haptic Feedback to Assist Bus Drivers for Pedestrian Safety at Low Speed. IEEE Transactions on Haptics. 9(3):345-357. https://doi.org/10.1109/TOH.2016.2531686S3453579

Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving)

[EN] Nowadays, there are many electronic products that incorporate elements and features coming from the research in the field of mobile robotics. For instance, the well-known vacuum cleaning robot Roomba by iRobot, which belongs to the field of service robotics, one of the most active within the sector. There are also numerous autonomous robotic systems in industrial warehouses and plants. It is the case of Autonomous Guided Vehicles (AGVs), which are able to drive completely autonomously in very structured environments. Apart from industry and consumer electronics, within the automotive field there are some devices that give intelligence to the vehicle, derived in most cases from advances in mobile robotics. In fact, more and more often vehicles incorporate Advanced Driver Assistance Systems (ADAS), such as navigation control with automatic speed regulation, lane change and overtaking assistant, automatic parking or collision warning, among other features. However, despite all the advances there are some problems that remain unresolved and can be improved. Collisions and rollovers stand out among the most common accidents of vehicles with manual or autonomous driving. In fact, it is almost impossible to guarantee driving without accidents in unstructured environments where vehicles share the space with other moving agents, such as other vehicles and pedestrians. That is why searching for techniques to improve safety in intelligent vehicles, either autonomous or manual-assisted driving, is still a trending topic within the robotics community. This thesis focuses on the design of tools and techniques for planning and control of intelligent vehicles in order to improve safety and comfort. The dissertation is divided into two parts, the first one on autonomous driving and the second one on manual-assisted driving. The main link between them is the use of clothoids as mathematical formulation for both trajectory generation and collision detection. Among the problems solved the following stand out: obstacle avoidance, rollover avoidance and advanced driver assistance to avoid collisions with pedestrians.[ES] En la actualidad se comercializan infinidad de productos de electrónica de consumo que incorporan elementos y características procedentes de avances en el sector de la robótica móvil. Por ejemplo, el conocido robot aspirador Roomba de la empresa iRobot, el cual pertenece al campo de la robótica de servicio, uno de los más activos en el sector. También hay numerosos sistemas robóticos autónomos en almacenes y plantas industriales. Es el caso de los vehículos autoguiados (AGVs), capaces de conducir de forma totalmente autónoma en entornos muy estructurados. Además de en la industria y en electrónica de consumo, dentro del campo de la automoción también existen dispositivos que dotan de cierta inteligencia al vehículo, derivados la mayoría de las veces de avances en robótica móvil. De hecho, cada vez con mayor frecuencia los vehículos incorporan sistemas avanzados de asistencia al conductor (ADAS por sus siglas en inglés), tales como control de navegación con regulación automática de velocidad, asistente de cambio de carril y adelantamiento, aparcamiento automático o aviso de colisión, entre otras prestaciones. No obstante, pese a todos los avances siguen existiendo problemas sin resolver y que pueden mejorarse. La colisión y el vuelco destacan entre los accidentes más comunes en vehículos con conducción tanto manual como autónoma. De hecho, la dificultad de conducir en entornos desestructurados compartiendo el espacio con otros agentes móviles, tales como coches o personas, hace casi imposible garantizar la conducción sin accidentes. Es por ello que la búsqueda de técnicas para mejorar la seguridad en vehículos inteligentes, ya sean de conducción autónoma o manual asistida, es un tema que siempre está en auge en la comunidad robótica. La presente tesis se centra en el diseño de herramientas y técnicas de planificación y control de vehículos inteligentes, para la mejora de la seguridad y el confort. La disertación se ha dividido en dos partes, la primera sobre conducción autónoma y la segunda sobre conducción manual asistida. El principal nexo de unión es el uso de clotoides como elemento de generación de trayectorias y detección de colisiones. Entre los problemas que se resuelven destacan la evitación de obstáculos, la evitación de vuelcos y la asistencia avanzada al conductor para evitar colisiones con peatones.[CA] En l'actualitat es comercialitzen infinitat de productes d'electrònica de consum que incorporen elements i característiques procedents d'avanços en el sector de la robòtica mòbil. Per exemple, el conegut robot aspirador Roomba de l'empresa iRobot, el qual pertany al camp de la robòtica de servici, un dels més actius en el sector. També hi ha nombrosos sistemes robòtics autònoms en magatzems i plantes industrials. És el cas dels vehicles autoguiats (AGVs), els quals són capaços de conduir de forma totalment autònoma en entorns molt estructurats. A més de en la indústria i en l'electrònica de consum, dins el camp de l'automoció també existeixen dispositius que doten al vehicle de certa intel·ligència, la majoria de les vegades derivats d'avanços en robòtica mòbil. De fet, cada vegada amb més freqüència els vehicles incorporen sistemes avançats d'assistència al conductor (ADAS per les sigles en anglés), com ara control de navegació amb regulació automàtica de velocitat, assistent de canvi de carril i avançament, aparcament automàtic o avís de col·lisió, entre altres prestacions. No obstant això, malgrat tots els avanços segueixen existint problemes sense resoldre i que poden millorar-se. La col·lisió i la bolcada destaquen entre els accidents més comuns en vehicles amb conducció tant manual com autònoma. De fet, la dificultat de conduir en entorns desestructurats compartint l'espai amb altres agents mòbils, tals com cotxes o persones, fa quasi impossible garantitzar la conducció sense accidents. És per això que la recerca de tècniques per millorar la seguretat en vehicles intel·ligents, ja siguen de conducció autònoma o manual assistida, és un tema que sempre està en auge a la comunitat robòtica. La present tesi es centra en el disseny d'eines i tècniques de planificació i control de vehicles intel·ligents, per a la millora de la seguretat i el confort. La dissertació s'ha dividit en dues parts, la primera sobre conducció autònoma i la segona sobre conducció manual assistida. El principal nexe d'unió és l'ús de clotoides com a element de generació de trajectòries i detecció de col·lisions. Entre els problemes que es resolen destaquen l'evitació d'obstacles, l'evitació de bolcades i l'assistència avançada al conductor per evitar col·lisions amb vianants.Girbés Juan, V. (2016). Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving) [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/65072TESI

Implementation and Evaluation of a Cooperative Vehicle-to-Pedestrian Safety Application

While the development of Vehicle-to-Vehicle (V2V) safety applications based on Dedicated Short-Range Communications (DSRC) has been extensively undergoing standardization for more than a decade, such applications are extremely missing for Vulnerable Road Users (VRUs). Nonexistence of collaborative systems between VRUs and vehicles was the main reason for this lack of attention. Recent developments in Wi-Fi Direct and DSRC-enabled smartphones are changing this perspective. Leveraging the existing V2V platforms, we propose a new framework using a DSRC-enabled smartphone to extend safety benefits to VRUs. The interoperability of applications between vehicles and portable DSRC enabled devices is achieved through the SAE J2735 Personal Safety Message (PSM). However, considering the fact that VRU movement dynamics, response times, and crash scenarios are fundamentally different from vehicles, a specific framework should be designed for VRU safety applications to study their performance. In this article, we first propose an end-to-end Vehicle-to-Pedestrian (V2P) framework to provide situational awareness and hazard detection based on the most common and injury-prone crash scenarios. The details of our VRU safety module, including target classification and collision detection algorithms, are explained next. Furthermore, we propose and evaluate a mitigating solution for congestion and power consumption issues in such systems. Finally, the whole system is implemented and analyzed for realistic crash scenarios

Urban and extra-urban hybrid vehicles: a technological review

Pollution derived from transportation systems is a worldwide, timelier issue than ever. The abatement actions of harmful substances in the air are on the agenda and they are necessary today to safeguard our welfare and that of the planet. Environmental pollution in large cities is approximately 20% due to the transportation system. In addition, private traffic contributes greatly to city pollution. Further, “vehicle operating life” is most often exceeded and vehicle emissions do not comply with European antipollution standards. It becomes mandatory to find a solution that respects the environment and, realize an appropriate transportation service to the customers. New technologies related to hybrid –electric engines are making great strides in reducing emissions, and the funds allocated by public authorities should be addressed. In addition, the use (implementation) of new technologies is also convenient from an economic point of view. In fact, by implementing the use of hybrid vehicles, fuel consumption can be reduced. The different hybrid configurations presented refer to such a series architecture, developed by the researchers and Research and Development groups. Regarding energy flows, different strategy logic or vehicle management units have been illustrated. Various configurations and vehicles were studied by simulating different driving cycles, both European approval and homologation and customer ones (typically municipal and university). The simulations have provided guidance on the optimal proposed configuration and information on the component to be used

Technology transfer: Transportation

The application of NASA derived technology in solving problems related to highways, railroads, and other rapid systems is described. Additional areas/are identified where space technology may be utilized to meet requirements related to waterways, law enforcement agencies, and the trucking and recreational vehicle industries

Vision-based active safety system for automatic stopping

ntelligent systems designed to reduce highway fatalities have been widely applied in the automotive sector in the last decade. Of all users of transport systems, pedestrians are the most vulnerable in crashes as they are unprotected. This paper deals with an autonomous intelligent emergency system designed to avoid collisions with pedestrians. The system consists of a fuzzy controller based on the time-to-collision estimate – obtained via a vision-based system – and the wheel-locking probability – obtained via the vehicle’s CAN bus – that generates a safe braking action. The system has been tested in a real car – a convertible Citroën C3 Pluriel – equipped with an automated electro-hydraulic braking system capable of working in parallel with the vehicle’s original braking circuit. The system is used as a last resort in the case that an unexpected pedestrian is in the lane and all the warnings have failed to produce a response from the driver

A Parallel Autonomy Research Platform

We present the development of a full-scale “parallel autonomy” research platform including software and hardware. In the parallel autonomy paradigm, the control of the vehicle is shared; the human is still in control of the vehicle, but the autonomy system is always running in the background to prevent accidents. Our holistic approach includes: (1) a driveby-wire conversion method only based on reverse engineering, (2) mounting of relatively inexpensive sensors onto the vehicle, (3) implementation of a localization and mapping system, (4) obstacle detection and (5) a shared controller as well as (6) integration with an advanced autonomy simulation system (Drake) for rapid development and testing. The system can operate in three modes: (a) manual driving, (b) full autonomy, where the system is in complete control of the vehicle and (c) parallel autonomy, where the shared controller is implemented. We present results from extensive testing of a full-scale vehicle on closed tracks that demonstrate these capabilities