An AER Contrast Retina with On-Chip Calibration

We present a contrast retina microchip that provides its output as an AER (Address Event Representation) stream. Contrast is computed as the ratio between pixel photocurrent and a local average between neighboring pixels obtained with a diffusive network. This current based computation produces a large mismatch between neighboring pixels, because the currents can be as low as a few pico amperes. Consequently, a compact calibration circuitry has been included to calibrate each pixel. The paper describes the design of the pixel with its contrast computation and calibration sections. Experimental results are provided for a prototype fabricated in a standard 0.35μm CMOS process.Comisión Interministerial de Ciencia y Tecnología TIC2003-08164-C03-01European Union IST-2001-3412

A spatial contrast retina with on-chip calibration for neuromorphic spike-based AER vision systems

We present a 32 32 pixels contrast retina microchip that provides its output as an address event representation (AER) stream. Spatial contrast is computed as the ratio between pixel photocurrent and a local average between neighboring pixels obtained with a diffuser network. This current-based computation produces an important amount of mismatch between neighboring pixels, because the currents can be as low as a few pico-amperes. Consequently, a compact calibration circuitry has been included to trimm each pixel. Measurements show a reduction in mismatch standard deviation from 57% to 6.6% (indoor light). The paper describes the design of the pixel with its spatial contrast computation and calibration sections. About one third of pixel area is used for a 5-bit calibration circuit. Area of pixel is 58 m 56 m, while its current consumption is about 20 nA at 1-kHz event rate. Extensive experimental results are provided for a prototype fabricated in a standard 0.35- m CMOS process.Gobierno de España TIC2003-08164-C03-01, TEC2006-11730-C03-01European Union IST-2001-3412

On Real-Time AER 2-D Convolutions Hardware for Neuromorphic Spike-Based Cortical Processing

In this paper, a chip that performs real-time image convolutions with programmable kernels of arbitrary shape is presented. The chip is a first experimental prototype of reduced size to validate the implemented circuits and system level techniques. The convolution processing is based on the address–event-representation (AER) technique, which is a spike-based biologically inspired image and video representation technique that favors communication bandwidth for pixels with more information. As a first test prototype, a pixel array of 16x16 has been implemented with programmable kernel size of up to 16x16. The chip has been fabricated in a standard 0.35- m complimentary metal–oxide–semiconductor (CMOS) process. The technique also allows to process larger size images by assembling 2-D arrays of such chips. Pixel operation exploits low-power mixed analog–digital circuit techniques. Because of the low currents involved (down to nanoamperes or even picoamperes), an important amount of pixel area is devoted to mismatch calibration. The rest of the chip uses digital circuit techniques, both synchronous and asynchronous. The fabricated chip has been thoroughly tested, both at the pixel level and at the system level. Specific computer interfaces have been developed for generating AER streams from conventional computers and feeding them as inputs to the convolution chip, and for grabbing AER streams coming out of the convolution chip and storing and analyzing them on computers. Extensive experimental results are provided. At the end of this paper, we provide discussions and results on scaling up the approach for larger pixel arrays and multilayer cortical AER systems.Commission of the European Communities IST-2001-34124 (CAVIAR)Commission of the European Communities 216777 (NABAB)Ministerio de Educación y Ciencia TIC-2000-0406-P4Ministerio de Educación y Ciencia TIC-2003-08164-C03-01Ministerio de Educación y Ciencia TEC2006-11730-C03-01Junta de Andalucía TIC-141

Spike Events Processing for Vision Systems

In this paper we briefly summarize the fundamental properties of spike events processing applied to artificial vision systems. This sensing and processing technology is capable of very high speed throughput, because it does not rely on sensing and processing sequences of frames, and because it allows for complex hierarchically structured cortical-like layers for sophisticated processing. The paper includes a few examples that have demonstrated the potential of this technology for highspeed vision processing, such as a multilayer event processing network of 5 sequential cortical-like layers, and a recognition system capable of discriminating propellers of different shape rotating at 5000 revolutions per second (300000 revolutions per minute)

Bio-Inspired Stereo Vision Calibration for Dynamic Vision Sensors

Many advances have been made in the eld of computer vision. Several recent research trends have focused on mimicking human vision by using a stereo vision system. In multi-camera systems, a calibration process is usually implemented to improve the results accuracy. However, these systems generate a large amount of data to be processed; therefore, a powerful computer is required and, in many cases, this cannot be done in real time. Neuromorphic Engineering attempts to create bio-inspired systems that mimic the information processing that takes place in the human brain. This information is encoded using pulses (or spikes) and the generated systems are much simpler (in computational operations and resources), which allows them to perform similar tasks with much lower power consumption, thus these processes can be developed over specialized hardware with real-time processing. In this work, a bio-inspired stereovision system is presented, where a calibration mechanism for this system is implemented and evaluated using several tests. The result is a novel calibration technique for a neuromorphic stereo vision system, implemented over specialized hardware (FPGA - Field-Programmable Gate Array), which allows obtaining reduced latencies on hardware implementation for stand-alone systems, and working in real time.Ministerio de Economía y Competitividad TEC2016-77785-PMinisterio de Economía y Competitividad TIN2016-80644-

Live Demonstration: On the distance estimation of moving targets with a Stereo-Vision AER system

Distance calculation is always one of the most important goals in a digital stereoscopic vision system. In an AER system this goal is very important too, but it cannot be calculated as accurately as we would like. This demonstration shows a first approximation in this field, using a disparity algorithm between both retinas. The system can make a distance approach about a moving object, more specifically, a qualitative estimation. Taking into account the stereo vision system features, the previous retina positioning and the very important Hold&Fire building block, we are able to make a correlation between the spike rate of the disparity and the distance.Ministerio de Ciencia e Innovación TEC2009-10639-C04-0

A spatial contrast retina with on-chip calibration for neuromorphic spike-based AER vision systems

We present a 32 32 pixels contrast retina microchip that provides its output as an address event representation (AER) stream. Spatial contrast is computed as the ratio between pixel photocurrent and a local average between neighboring pixels obtained with a diffuser network. This current-based computation produces an important amount of mismatch between neighboring pixels, because the currents can be as low as a few pico-amperes. Consequently, a compact calibration circuitry has been included to trimm each pixel. Measurements show a reduction in mismatch standard deviation from 57% to 6.6% (indoor light). The paper describes the design of the pixel with its spatial contrast computation and calibration sections. About one third of pixel area is used for a 5-bit calibration circuit. Area of pixel is 58 m 56 m, while its current consumption is about 20 nA at 1-kHz event rate. Extensive experimental results are provided for a prototype fabricated in a standard 0.35- m CMOS process.This work was supported by Spanish Research Grants TIC2003-08164-C03-01 (SAMANTA), TEC2006-11730-C03-01 (SAMANTA-II), and EU grant IST-2001-34124 (CAVIAR). JCS was supported by the I3P program of the Spanish Research Council. RSG was supported by a national grant from the Spanish Ministry of Education and Science.Peer reviewe

A Bio-Inspired Vision Sensor With Dual Operation and Readout Modes

This paper presents a novel event-based vision sensor with two operation modes: intensity mode and spatial contrast detection. They can be combined with two different readout approaches: pulse density modulation and time-to-first spike. The sensor is conceived to be a node of an smart camera network made up of several independent an autonomous nodes that send information to a central one. The user can toggle the operation and the readout modes with two control bits. The sensor has low latency (below 1 ms under average illumination conditions), low power consumption (19 mA), and reduced data flow, when detecting spatial contrast. A new approach to compute the spatial contrast based on inter-pixel event communication less prone to mismatch effects than diffusive networks is proposed. The sensor was fabricated in the standard AMS4M2P 0.35-um process. A detailed system-level description and experimental results are provided.Office of Naval Research (USA) N00014-14-1-0355Ministerio de Economía y Competitividad TEC2012- 38921-C02-02, P12-TIC-2338, IPT-2011-1625-43000

A spatial calibrated AER contrast retina with adjustable contrast threshold

Address Event Representation (AER) is an emergent technology for assembling modular multi-blocks bio-inspired sensory and processing systems. Visual sensors (retinae) are among the first AER modules to be reported since the introduction of the technology. Spatial contrast AER retinae are of special interest since they provide highly compressed data flow without reducing the relevant information required for performing recognition. Reported AER contrast retinae perform a contrast computation based on the ratio between a pixel’s local light intensity and a spatially weighted average of its neighbourhood. This results in compact circuits, but with the penalty of all pixels generating output signals even if they sensed no contrast. In this paper we present a spatial contrast retina with bipolar output: contrast is computed as the relative difference between a pixel’s local light and its weighted spatial average. As a result, contrast includes a sign and the output will be zero if there is no contrast. Furthermore, an adjustable thresholding mechanism has been included, such that pixels remain silent until they sense an absolute contrast above the adjustable threshold. The pixel contrast computation circuit is based on Boahen’s Biharmonic operator contrast circuit, which has been improved to include mismatch calibration and adaptive current based biasing. As a result, the contrast computation circuit shows much less mismatch, is almost insensitive to ambient light illumination, and biasing is much less critical than in the original voltage biasing scheme. A full AER retina version has been fabricated. In the present paper we provide simulation and preliminary experimental results.Unión Europea (NABAB) 216777España Beca (SAMANTA2)TEC2006-11730-C03-01Andalucía Beca (Brain Sistemas) P06TIC0141

An AER Spike-Processing Filter Simulator and Automatic VHDL Generator Based on Cellular Automata

Spike-based systems are neuro-inspired circuits implementations traditionally used for sensory systems or sensor signal processing. Address-Event- Representation (AER) is a neuromorphic communication protocol for transferring asynchronous events between VLSI spike-based chips. These neuro-inspired implementations allow developing complex, multilayer, multichip neuromorphic systems and have been used to design sensor chips, such as retinas and cochlea, processing chips, e.g. filters, and learning chips. Furthermore, Cellular Automata (CA) is a bio-inspired processing model for problem solving. This approach divides the processing synchronous cells which change their states at the same time in order to get the solution. This paper presents a software simulator able to gather several spike-based elements into the same workspace in order to test a CA architecture based on AER before a hardware implementation. Furthermore this simulator produces VHDL for testing the AER-CA into the FPGA of the USBAER AER-tool.Ministerio de Ciencia e Innovación TEC2009-10639-C04-0