189 research outputs found

    Timing Signals and Radio Frequency Distribution Using Ethernet Networks for High Energy Physics Applications

    Get PDF
    Timing networks are used around the world in various applications from telecommunications systems to industrial processes, and from radio astronomy to high energy physics. Most timing networks are implemented using proprietary technologies at high operation and maintenance costs. This thesis presents a novel timing network capable of distributed timing with subnanosecond accuracy. The network, developed at CERN and codenamed “White- Rabbit”, uses a non-dedicated Ethernet link to distribute timing and data packets without infringing the sub-nanosecond timing accuracy required for high energy physics applications. The first part of this thesis proposes a new digital circuit capable of measuring time differences between two digital clock signals with sub-picosecond time resolution. The proposed digital circuit measures and compensates for the phase variations between the transmitted and received network clocks required to achieve the sub-nanosecond timing accuracy. Circuit design, implementation and performance verification are reported. The second part of this thesis investigates and proposes a new method to distribute radio frequency (RF) signals over Ethernet networks. The main goal of existing distributed RF schemes, such as Radio-Over-Fibre or Digitised Radio-Over-Fibre, is to increase the bandwidth capacity taking advantage of the higher performance of digital optical links. These schemes tend to employ dedicated and costly technologies, deemed unnecessary for applications with lower bandwidth requirements. This work proposes the distribution of RF signals over the “White-Rabbit” network, to convey phase and frequency information from a reference base node to a large numbers of remote nodes, thus achieving high performance and cost reduction of the timing network. Hence, this thesis reports the design and implementation of a new distributed RF system architecture; analysed and tested using a purpose-built simulation environment, with results used to optimise a new bespoke FPGA implementation. The performance is evaluated through phase-noise spectra, the Allan-Variance, and signalto- noise ratio measurements of the distributed signals

    From analog to digital

    Get PDF
    Analog-to-digital conversion and its reverse, digital-to-analog conversion, are ubiquitous in all modern electronics, from instrumentation and telecommunication equipment to computers and entertainment. We shall explore the consequences of converting signals between the analog and digital domains and give an overview of the internal architecture and operation of a number of converter types. The importance of analog input and clock signal integrity will be explained and methods to prevent or mitigate the effects of interference will be shown. Examples will be drawn from several manufacturers' datasheets

    Analysis and Design of High-Speed A/D Converters in SiGe Technology

    Get PDF
    Mixed-signal systems play a key role in modern communications and electronics. The quality of A/D and D/A conversions deeply affects what we see and what we hear in the real world video and radio. This dissertation deals with high-speed ADCs: a 5-bit 500-MSPS ADC and an 8-bit 2-GSPS ADC. These units can be applied in flat panel display, image enhancement and in high-speed data link. To achieve the state-of-the-art performance, we employed a 0.13-μm/2.5-V 210-GHz (unity-gain frequency) BiCMOS SiGe process for all the implementations. The circuit building blocks, such as the Track-and-Hold circuit (T/H) and the comparator, required by an ADC not only benefit from SiGe's superior ultra-high frequency properties but also by its power drive capability. The T/H described here achieved a dynamic performance of 8-bit accuracy at 2-GHz Nyquist rate with an input full scale range of 1 Vp-p. The T/H consumed 13 mW of power. The unique 4-in/2-out comparator was made of fully differential emitter couple pairs in order to operate at such a high frequency. Cascaded cross-coupled amplifier core was employed to reduce Miller effect and to avoid collector-emitter breakdown of the HBTs. We utilized the comparator interpolation technique between the preamplifer stages and the latches to reduce the total power dissipated by the comparator array. In addition, we developed an innovative D/A conversion and analog subtraction approach necessary for two-step conversion by using a bipolar pre-distortion technique. This innovation enabled us to decrease the design complexity in the subranging process of a two-step ADC. The 5-bit interpolating ADC operated at 2-GSPS achieved a differential nonlinearity (DNL) of 0.114 LSB and an integral nonlinearity (INL) of 0.076 LSB. The effective number of bits (ENOBs) are 4.3 bits at low frequency and 4.1 bits near Nyquist rate. The power dissipation was reduced more than half to 66.14 mW, with comparator interpolation. The 8-bit two-step interpolating ADC operated at 500-MSPS. It achieved a DNL of 0.33 LSB and an INL of 0.40 LSB with a power consumption of 172 mW. The ENOBs are 7.5 bits at low frequency and 6.9 bits near Nyquist rate

    A low-power quadrature digital modulator in 0.18um CMOS

    Get PDF
    Quadrature digital modulation techniques are widely used in modern communication systems because of their high performance and flexibility. However, these advantages come at the cost of high power consumption. As a result, power consumption has to be taken into account as a main design factor of the modulator.In this thesis, a low-power quadrature digital modulator in 0.18um CMOS is presented with the target system clock speed of 150 MHz. The quadrature digital modulator consists of several key blocks: quadrature direct digital synthesizer (QDDS), pulse shaping filter, interpolation filter and inverse sinc filter. The design strategy is to investigate different implementations for each block and compare the power consumption of these implementations. Based on the comparison results, the implementation that consumes the lowest power will be chosen for each block. First of all, a novel low-power QDDS is proposed in the thesis. Power consumption estimation shows that it can save up to 60% of the power consumption at 150 MHz system clock frequency compared with one conventional design. Power consumption estimation results also show that using two pulse shaping blocks to process I/Q data, cascaded integrator comb (CIC) interpolation structure, and inverse sinc filter with modified canonic signed digit (MCSD) multiplication consume less power than alternative design choices. These low-power blocks are integrated together to achieve a low-power modulator. The power consumption estimation after layout shows that it only consumes about 95 mW at 150 MHz system clock rate, which is much lower than similar commercial products. The designed modulator can provide a low-power solution for various quadrature modulators. It also has an output bandwidth from 0 to 75 MHz, configurable pulse shaping filters and interpolation filters, and an internal sin(x)/x correction filter

    Development and evaluation of a programmable radio frequency signal

    Get PDF
    ThesisMost commercially available signal generators make use of a phase-locked loop in combination with analogue frequency synthesis to generate the desired frequency range. Advances in the development of components being used in digital frequency synthesis have made the use of direct digital synthesis (DDS) a viable option in radio frequency (RF) signal generation. The project consists of designing the interfacing between a DDS unit and a microcontroller to provide a versatile frequency generator in the lower high frequency (HF) spectrum. The research was aimed at testing the following hypothesis: A programmable Radio Frequency signal generator can be developed, using a DDS-based system with a microcontroller providing the required intelligence. A continuously variable frequency range in 1 Hz steps over a spectrum of 0- 10 MHz can be achieved. The following features were included in the design of the signal generator: • Setting the generator to a specific frequency; • Displaying the frequency and prompts from the microcontroller on a liquid crystal display; • Interfacing with a keypad; • Interfacing with a personal computer for remote RS232 operation; • Interfacing with a rotary optical encoder for up-and-down frequency control; • Sweeping of a range of frequencies; • Setting the step size of frequency increments; • Frequency shift keying (FSK) capability. The above features allowed ample demonstration of the software control over the associated hardware and enabled easy evaluation of the product. To evaluate the product, it was decided to concentrate on the following measurable aspects of a typical radio frequency (RF) signal generator: • The accuracy of the output frequency; • Evaluating the frequency range limits of the generator; • Making a spectral analysis of the output signal. During the execution of the project, insight was gained with respect to the following: • DDS theory; • DDS hardware interfacing; • C-programming as well as using the versatile DSSOOO microcontroller; • The importance of sound design principles in a hybrid digital and analogue radio frequency project. • Setting the step size of frequency increments; • Frequency shift keying (FSK) capability. The above features allowed ample demonstration of the software control over the associated hardware and enabled easy evaluation of the product. To evaluate the product, it was decided to concentrate on the following measurable aspects of a typical radio frequency (RF) signal generator: • The accuracy of the output frequency; • Evaluating the frequency range limits of the generator; • Making a spectral analysis of the output signal. During the execution of the project, insight was gained with respect to the following: • DDS theory; • DDS hardware interfacing; • C-programming as well as using the versatile DSSOOO microcontroller; • The importance of sound design principles in a hybrid digital and analogue radio frequency project

    Doctor of Philosophy

    Get PDF
    dissertationAdvancements in process technology and circuit techniques have enabled the creation of small chemical microsystems for use in a wide variety of biomedical and sensing applications. For applications requiring a small microsystem, many components can be integrated onto a single chip. This dissertation presents many low-power circuits, digital and analog, integrated onto a single chip called the Utah Microcontroller. To guide the design decisions for each of these components, two specific microsystems have been selected as target applications: a Smart Intravaginal Ring (S-IVR) and an NO releasing catheter. Both of these applications share the challenging requirements of integrating a large variety of low-power mixed-signal circuitry onto a single chip. These applications represent the requirements of a broad variety of small low-power sensing systems. In the course of the development of the Utah Microcontroller, several unique and significant contributions were made. A central component of the Utah Microcontroller is the WIMS Microprocessor, which incorporates a low-power feature called a scratchpad memory. For the first time, an analysis of scaling trends projected that scratchpad memories will continue to save power for the foreseeable future. This conclusion was bolstered by measured data from a fabricated microcontroller. In a 32 nm version of the WIMS Microprocessor, the scratchpad memory is projected to save ~10-30% of memory access energy depending upon the characteristics of the embedded program. Close examination of application requirements informed the design of an analog-to-digital converter, and a unique single-opamp buffered charge scaling DAC was developed to minimize power consumption. The opamp was designed to simultaneously meet the varied demands of many chip components to maximize circuit reuse. Each of these components are functional, have been integrated, fabricated, and tested. This dissertation successfully demonstrates that the needs of emerging small low-power microsystems can be met in advanced process nodes with the incorporation of low-power circuit techniques and design choices driven by application requirements

    Design and Implementation of a Re-Configurable Arbitrary Signal Generator and Radio Frequency Spectrum Analyser

    Get PDF
    This research is focused on the design, simulation and implementation of a reconfigurable arbitrary signal generator and the design, simulation and implementation of a radio frequency spectrum analyser based on digital signal processing. Until recently, Application Specific Integrated Circuits (ASICs) were used to produce high performance re-configurable function and arbitrary waveform generators with comprehensive modulation capabilities. However, that situation is now changing with the availability of advanced but low cost Field Programmable Gate Arrays (FPGAs), which could be used as an alternative to ASICs in these applications. The availability of high performance FPGA families opens up the opportunity to compete with ASIC solutions at a fraction of the development cost of an ASIC solution. A fast digital signal processing algorithm for digital waveform generation, using primarily but not limited to Direct Digital Synthesis (DDS) technologies, developed and implemented in a field-configurable logic, with control provided by an embedded microprocessor replacing a high cost ASIC design appeared to be a very attractive concept. This research demonstrates that such a concept is feasible in its entirety. A fully functional, low-complexity, low cost, pulse, Gaussian white noise and DDS based function and arbitrary waveform generator, capable of being amplitude, frequency and phase modulated by an internally generated or external modulating signal was implemented in a low-cost FPGA. The FPGA also included the capabilities to perform pulse width modulation and pulse delay modulation on pulse waveforms. Algorithms to up-convert the sampling rate of the external modulating signal using Cascaded Integrator Comb (CIC) filters and using interpolation method were analysed. Both solutions were implemented to compare their hardware complexities. Analysis of generating noise with user-defined distribution is presented. The ability of triggering the generator by an internally generated or an external event to generate a burst of waveforms where the time between the trigger signal and waveform output is fixed was also implemented in the FPGA. Finally, design of interface to a microprocessor to provide control of the versatile waveform generator was also included in the FPGA. This thesis summarises the literature, design considerations, simulation and implementation of the generator design. The second part of the research is focused on radio frequency spectrum analysis based on digital signal processing. Most existing spectrum analysers are analogue in nature and their complexity increases with frequency. Therefore, the possibility of using digital techniques for spectrum analysis was considered. The aim was to come up with digital system architecture for spectrum analysis and to develop and implement the new approach on a suitable digital platform. This thesis analyses the current literature on shifting algorithms to remove spurious responses and highlights its drawbacks. This thesis also analyses existing literature on quadrature receivers and presents novel adaptation of the existing architectures for application in spectrum analysis. A wide band spectrum analyser receiver with compensation for gain and phase imbalances in the Radio Frequency (RF) input range, as well as compensation for gain and phase imbalances within the Intermediate Frequency (IF) pass band complete with Resolution Band Width (RBW) filtering, Video Band Width (VBW) filtering and amplitude detection was implemented in a low cost FPGA. The ability to extract the modulating signal from a frequency or amplitude modulated RF signal was also implemented. The same family of FPGA used in the generator design was chosen to be the digital platform for this design. This research makes arguments for the new architecture and then summarises the literature, design considerations, simulation and implementation of the new digital algorithm for the radio frequency spectrum analyser
    corecore