Outage Performance of Bidirectional Full-Duplex Amplify-and-Forward Relay Network with Transmit Antenna Selection and Maximal Ratio Combining, Journal of Telecommunications and Information Technology, 2018, nr 1

In this paper, a bidirectional full-duplex amplify- and-forward (AF) relay network with multiple antennas at source nodes is proposed. Assuming that the channel state information is known at the source nodes, transmit antenna selection and maximal ratio combining (MRC) are employed when source nodes transmit information to the relay node and receive information from the relay node respectively, in order to improve the overall signal-to-interference plus noise ratio (SINR). Analytical expressions are derived for tight upper bound SINR at the relay node and source nodes upon reception. Further, losed form expressions are also derived for end-to-end outage probability of the proposed bidirectional full-duplex AF relay network in the Nakagami-m fading channel environment. Although self-interference at the relay node limits the performance of the full-duplex network, the outage performance of the proposed network is better than that of conventional bidirectional full-duplex and half-duplex AF relay networks, due to the selection diversity gain in TAS and diversity and array gain in MRC

Massive MIMO for Full-Duplex Cellular Two-Way Relay Network: A Spectral Efficiency Study

© 2017 IEEE. This paper presents the new analysis of the applications of massive multiple-input-multiple-output (MIMO) in full-duplex (FD) cellular two-way relay networks, and sheds valuable insights on the interactions between massive MIMO, and relay and duplex modes. Practical scenarios are considered, where massive MIMO is deployed at the base station and the relay station. Based on generic relay modes, namely, antenna-selection-based decode-and-forward (DF) relay and signal-space alignment based amplify-and-forward (AF) relay, closed-form expressions for the asymptotic signal-to-interference-plus-noise ratios (SINRs) are derived. The difference between AF and DF in the FD mode is quantified, and so is that between FD and half-duplex (HD) under the two relay modes. With massive MIMO, the superiority of DF in the FD mode is confirmed in terms of spectral efficiency. The sufficient conditions for the FD mode to outperform the HD mode are identified. The effectiveness of massive MIMO in terms of self-loop interference cancellation and inter-user interference suppression is proved. All these insightful findings are corroborated by simulations

Full-Duplex Versus Half-Duplex Amplify-and-Forward Relaying: Which is More Energy Efficient in 60-GHz Dual-Hop Indoor Wireless Systems?

We provide a comprehensive energy efficiency (EE) analysis of the full-duplex (FD) and half-duplex (HD) amplify-and-forward (AF) relay-assisted 60-GHz dual-hop indoor wireless systems, aiming to answer the question of which relaying mode is greener (more energy efficient) and to address the issue of EE optimization. We develop an opportunistic relaying mode selection scheme, where FD relaying with one-stage self-interference cancellation (passive suppression) or two-stage self-interference cancellation (passive suppression + analog cancellation) or HD relaying is opportunistically selected, together with transmission power adaptation, to maximize the EE with given channel gains. A low-complexity joint mode selection and EE optimization algorithm are proposed. We show a counter-intuitive finding that with a relatively loose maximum transmission power constraint, FD relaying with two-stage self-interference cancellation is preferable to both FD relaying with one-stage self-interference cancellation and HD relaying, resulting in a higher optimized EE. A full range of power consumption sources is considered to rationalize our analysis. The effects of imperfect self-interference cancellation at relay, drain efficiency, and static circuit power on EE are investigated. Simulation results verify our theoretical analysis

Hybrid Full-Duplex and Alternate Multiple Relay Selection and Beamforming in AF Cooperative Networks

In this paper, multiple relay selection and beamforming techniques are applied to a dual-hop full-duplex (FD) amplify-and-forward relaying network. We show that our proposed techniques allow the selection to be adaptive to the residual self-interference (SI) level for each of the available relays in the network. The adaptivity of our selection schemes is manifested through a hybrid system that is based on FD relaying and switching based on the overall channel conditions and the statistics of the residual SI channel for each of the relays. In particular, different proposed techniques are shown to be able to adaptively decide on when and how often the used relays should be switched in the case of overwhelming residual SI. Our results show that allowing such a fusion considerably improves the overall performance of the considered relaying scheme in terms of bit error rate compared with state-of-the-art relay selection schemes.This work was supported by the Qatar National Research Fund (a member of the Qatar Foundation) through GSRA under Grant #2-1-0601-14011.Scopu

Outage Probability Analysis of Full-Duplex Amplify-and-Forward MIMO Relay Systems

abstract: Multiple-input multiple-output systems have gained focus in the last decade due to the benefits they provide in enhancing the quality of communications. On the other hand, full-duplex communication has attracted remarkable attention due to its ability to improve the spectral efficiency compared to the existing half-duplex systems. Using full-duplex communications on MIMO co-operative networks can provide us solutions that can completely outperform existing systems with simultaneous transmission and reception at high data rates. This thesis considers a full-duplex MIMO relay which amplifies and forwards the received signals, between a source and a destination that do not a have line of sight. Full-duplex mode raises the problem of self-interference. Though all the links in the system undergo frequency flat fading, the end-to-end effective channel is frequency selective. This is due to the imperfect cancellation of the self-interference at the relay and this residual self-interference acts as intersymbol interference at the destination which is treated by equalization. This also leads to complications in form of recursive equations to determine the input-output relationship of the system. This also leads to complications in the form of recursive equations to determine the input-output relationship of the system. To overcome this, a signal flow graph approach using Mason's gain formula is proposed, where the effective channel is analyzed with keen notice to every loop and path the signal traverses. This gives a clear understanding and awareness about the orders of the polynomials involved in the transfer function, from which desired conclusions can be drawn. But the complexity of Mason's gain formula increases with the number of antennas at relay which can be overcome by the proposed linear algebraic method. Input-output relationship derived using simple concepts of linear algebra can be generalized to any number of antennas and the computation complexity is comparatively very low. For a full-duplex amplify-and-forward MIMO relay system, assuming equalization at the destination, new mechanisms have been implemented at the relay that can compensate the effect of residual self-interference namely equal-gain transmission and antenna selection. Though equal-gain transmission does not perform better than the maximal ratio transmission, a trade-off can be made between performance and implementation complexity. Using the proposed antenna selection strategy, one pair of transmit-receive antennas at the relay is selected based on four selection criteria discussed. Outage probability analysis is performed for all the strategies presented and detailed comparison has been established. Considering minimum mean-squared error decision feedback equalizer at the destination, a bound on the outage probability has been obtained for the antenna selection case and is used for comparisons. A cross-over point is observed while comparing the outage probabilities of equal-gain transmission and antenna selection techniques, as the signal-to-noise ratio increases and from that point antenna selection outperforms equal-gain transmission and this is explained by the fact of reduced residual self-interference in antenna selection method.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Towards the Optimal Amplify-and-Forward Cooperative Diversity Scheme

In a slow fading channel, how to find a cooperative diversity scheme that achieves the transmit diversity bound is still an open problem. In fact, all previously proposed amplify-and-forward (AF) and decode-and-forward (DF) schemes do not improve with the number of relays in terms of the diversity multiplexing tradeoff (DMT) for multiplexing gains r higher than 0.5. In this work, we study the class of slotted amplify-and-forward (SAF) schemes. We first establish an upper bound on the DMT for any SAF scheme with an arbitrary number of relays N and number of slots M. Then, we propose a sequential SAF scheme that can exploit the potential diversity gain in the high multiplexing gain regime. More precisely, in certain conditions, the sequential SAF scheme achieves the proposed DMT upper bound which tends to the transmit diversity bound when M goes to infinity. In particular, for the two-relay case, the three-slot sequential SAF scheme achieves the proposed upper bound and outperforms the two-relay non-orthorgonal amplify-and-forward (NAF) scheme of Azarian et al. for multiplexing gains r < 2/3. Numerical results reveal a significant gain of our scheme over the previously proposed AF schemes, especially in high spectral efficiency and large network size regime.Comment: 30 pages, 11 figures, submitted to IEEE trans. IT, revised versio

Rate Balancing in Full-Duplex MIMO Two-Way Relay Networks

Maximizing the minimum rate for a full-duplex multiple-input multiple-output (MIMO) wireless network encompassing two sources and a two-way (TW) relay operating in a two hop manner is investigated. To improve the overall performance, using a zero-forcing approach at the relay to suppress the residual self-interference arising from full-duplex (FD) operation, the underlying max-min problem is cast as an optimization problem which is non-convex. To circumvent this issue, semidefinite relaxation technique is employed, leading to upper and lower bound solutions for the optimization problem. Numerical results verify that the upper and lower bound solutions closely follow each other, showing that the proposed approach results in a close-to-optimal solution. In addition, the impact of residual self-interference upon the overall performance of the network in terms of the minimum rate is illustrated by numerical results, and for low residual self-interference scenarios the superiority of the proposed method compared to an analogous half-duplex (HD) counterpart is shown