Development of IR-based short-range communication techniques for swarm robot applications

This paper proposes several designs for a reliable infra-red based communication techniques for swarm robotic applications. The communication system was deployed on an autonomous miniature mobile robot (AMiR), a swarm robotic platform developed earlier. In swarm applications, all participating robots must be able to communicate and share data. Hence a suitable communication medium and a reliable technique are required. This work uses infrared radiation for transmission of swarm robots messages. Infrared transmission methods such as amplitude and frequency modulations will be presented along with experimental results. Finally the effects of the modulation techniques and other parameters on collective behavior of swarm robots will be analyzed

Cooperative strategies for the detection and localization of odorants with robots and artificial noses

En este trabajo de investigación se aborda el diseño de una plataforma robótica orientada a la implementación de estrategias de búsqueda cooperativa bioinspiradas. En particular, tanto el proceso de diseño de la parte electrónica como hardware se han enfocado hacia la validación en entornos reales de algoritmos capaces de afrontar problemas de búsqueda con incertidumbre, como lo es la búsqueda de fuentes de olor que presentan variación espacial y temporal. Este tipo de problemas pueden ser resueltos de forma más eficiente con el empleo de enjambres con una cantidad razonable de robots, y por tanto la plataforma ha sido desarrollada utilizando componentes de bajo coste. Esto ha sido posible por la combinación de elementos estandarizados -como la placa controladora Arduino y otros sensores integrados- con piezas que pueden ser fabricadas mediante una impresora 3D atendiendo a la filosofía del hardware libre (open-source). Entre los requisitos de diseño se encuentran además la eficiencia energética -para maximizar el tiempo de funcionamiento de los robots-, su capacidad de posicionamiento en el entorno de búsqueda, y la integración multisensorial -con la inclusión de una nariz electrónica, sensores de luminosidad, distancia, humedad y temperatura, así como una brújula digital-. También se aborda el uso de una estrategia de comunicación adecuada basada en ZigBee. El sistema desarrollado, denominado GNBot, se ha validado tanto en los aspectos de eficiencia energética como en sus capacidades combinadas de posicionamiento espacial y de detección de fuentes de olor basadas en disoluciones de etanol. La plataforma presentada -formada por el GNBot, su placa electrónica GNBoard y la capa de abstracción software realizada en Python- simplificará por tanto el proceso de implementación y evaluación de diversas estrategias de detección, búsqueda y monitorización de odorantes, con la estandarización de enjambres de robots provistos de narices artificiales y otros sensores multimodales.This research work addresses the design of a robotic platform oriented towards the implementation of bio-inspired cooperative search strategies. In particular, the design processes of both the electronics and hardware have been focused towards the real-world validation of algorithms that are capable of tackling search problems that have uncertainty, such as the search of odor sources that have spatio-temporal variability. These kind of problems can be solved more efficiently with the use of swarms formed by a considerable amount of robots, and thus the proposed platform makes use of low cost components. This has been possible with the combination of standardized elements -as the Arduino controller board and other integrated sensors- with custom parts that can be manufactured with a 3D printer attending to the open-source hardware philosophy. Among the design requirements is the energy efficiency -in order to maximize the working range of the robots-, their positioning capability within the search environment, and multiple sensor integration -with the incorporation of an artificial nose, luminosity, distance, humidity and temperature sensors, as well as an electronic compass-. Another subject that is tackled is the use of an efficient wireless communication strategy based on ZigBee. The developed system, named GNBot, has also been validated in the aspects of energy efficiency and for its combined capabilities for autonomous spatial positioning and detection of ethanol-based odor sources. The presented platform -formed by the GNBot, the GNBoard electronics and the abstraction layer built in Python- will thus simplify the processes of implementation and evaluation of various strategies for the detection, search and monitoring of odorants with conveniently standardized robot swarms provided with artificial noses and other multimodal sensors

Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms

The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications

Distributed, adaptive deployment for nonholonomic mobile sensor networks : theory and experiments

In this work we show the Lyapunov stability and convergence of an adaptive and decentralized coverage control for a team of mobile sensors. This new approach assumes nonholonomic sensors rather than the usual holonomic sensors found in the literature. The kinematics of the unicycle model and a nonlinear control law in polar coordinates are used in order to prove the stability of the controller applied over a team of mobile sensors. This controller is adaptive, which means that the mobile sensors are able to estimate and map a density function in the sampling space without a previous knowledge of the environment. The controller is decentralized, which means that each mobile sensor has its own estimate and computes its own control input based on local information. In order to guarantee the estimate convergence, the mobile sensors implement a consensus protocol in continuous time assuming a fixed network topology and zero communication delays. The convergence and feasibility of the coverage control algorithm are verified through simulations in Matlab and Stage. The Matlab simulations consider only the kinematics of the mobile sensors and the Stage simulations consider the dynamics and the kinematics of the sensors. The Matlab simulations show successful results since the sensor network carries out the coverage task and distributes itself over the estimated density function. The adaptive law which is defined by a differential equation must be approximated by a difference equation to be implementable in Stage. The Stage simulations show positive results, however, the system is not able to achieve an accurate estimation of the density function. In spite of that, the sensors carry out the coverage task distributing themselves over the sampling space. Furthermore, some experiments are carried out using a team of four Pioneer 3-AT robots sensing a piecewise constant light distribution function. The experimental results are satisfactory since the robots carry out the coverage task. However, the accuracy of the estimation is affected by the approximation of the adaptation law by difference equations, the number of robots and sensor sensitivity. Based on the results of this research, the decentralized adaptive coverage control for nonholonomic vehicles has been analyzed from a theoretical approach and validated through simulation and experimentation with positive results. As a future work we will investigate: (i) new techniques to improve the implementation of the adaptive law in real time,(ii) the consideration of the dynamics of the mobile sensors, and (iii) the stability and convergence of the adaptive law for continuous-time variant density function

Optical Synchronization of Time-of-Flight Cameras

Time-of-Flight (ToF)-Kameras erzeugen Tiefenbilder (3D-Bilder), indem sie Infrarotlicht aussenden und die Zeit messen, bis die Reflexion des Lichtes wieder empfangen wird. Durch den Einsatz mehrerer ToF-Kameras können ihre vergleichsweise geringere Auflösungen überwunden, das Sichtfeld vergrößert und Verdeckungen reduziert werden. Der gleichzeitige Betrieb birgt jedoch die Möglichkeit von Störungen, die zu fehlerhaften Tiefenmessungen führen. Das Problem der gegenseitigen Störungen tritt nicht nur bei Mehrkamerasystemen auf, sondern auch wenn mehrere unabhängige ToF-Kameras eingesetzt werden. In dieser Arbeit wird eine neue optische Synchronisation vorgestellt, die keine zusätzliche Hardware oder Infrastruktur erfordert, um ein Zeitmultiplexverfahren (engl. Time-Division Multiple Access, TDMA) für die Anwendung mit ToF-Kameras zu nutzen, um so die Störungen zu vermeiden. Dies ermöglicht es einer Kamera, den Aufnahmeprozess anderer ToF-Kameras zu erkennen und ihre Aufnahmezeiten schnell zu synchronisieren, um störungsfrei zu arbeiten. Anstatt Kabel zur Synchronisation zu benötigen, wird nur die vorhandene Hardware genutzt, um eine optische Synchronisation zu erreichen. Dazu wird die Firmware der Kamera um das Synchronisationsverfahren erweitert. Die optische Synchronisation wurde konzipiert, implementiert und in einem Versuchsaufbau mit drei ToF-Kameras verifiziert. Die Messungen zeigen die Wirksamkeit der vorgeschlagenen optischen Synchronisation. Während der Experimente wurde die Bildrate durch das zusätzliche Synchronisationsverfahren lediglich um etwa 1 Prozent reduziert.Time-of-Flight (ToF) cameras produce depth images (three-dimensional images) by measuring the time between the emission of infrared light and the reception of its reflection. A setup of multiple ToF cameras may be used to overcome their comparatively low resolution, increase the field of view, and reduce occlusion. However, the simultaneous operation of multiple ToF cameras introduces the possibility of interference resulting in erroneous depth measurements. The problem of interference is not only related to a collaborative multicamera setup but also to multiple ToF cameras operating independently. In this work, a new optical synchronization for ToF cameras is presented, requiring no additional hardware or infrastructure to utilize a time-division multiple access (TDMA) scheme to mitigate interference. It effectively enables a camera to sense the acquisition process of other ToF cameras and rapidly synchronizes its acquisition times to operate without interference. Instead of requiring cables to synchronize, only the existing hardware is utilized to enable an optical synchronization. To achieve this, the camera’s firmware is extended with the synchronization procedure. The optical synchronization has been conceptualized, implemented, and verified with an experimental setup deploying three ToF cameras. The measurements show the efficacy of the proposed optical synchronization. During the experiments, the frame rate was reduced by only about 1% due to the synchronization procedure

Reasoning with BDI robots: from simulation to physical environment – implementations and limitations

In this paper an overview of the state of research into cognitive robots is given. This is driven by insights arising from research that has moved from simulation to physical robots over the course of a number of sub-projects. A number of major issues arising from seminal research in the area are explored. In particular in the context of advances in the field of robotics and a slowly developing model of cognition and behaviour that is being mapped onto robot colonies. The work presented is ongoing but major themes such as the veracity of data and information, and their effect on robot control architectures are explored. A small number of case studies are presented where the theoretical framework has been used to implement control of physical robots. The limitations of the current research and the wider field of behavioral and cognitive robots are explored