Control of Voltage-Source Converters Considering Virtual Inertia Dynamics

Controlling power-electronic converters in power systems has significantly gained more attention due to the rapid penetration of alternative energy sources. This growth in the depth of penetration also poses a threat to the frequency stability of modern power systems. Photovoltaic and wind power systems utilizing power-electronic converters without physical rotating masses, unlike traditional power generations, provide low inertia, resulting in frequency instability. Different research has developed the control aspects of power-electronic converters, offering many control strategies for different operation modes and enhancing the inertia of converter-based systems. The precise control algorithm that can improve the inertial response of converter-based systems in the power grid is called virtual inertia. This thesis employs a control methodology that mimics synchronous generators characteristics based on the swing equation of rotor dynamics to create virtual inertia. The models are also built under different cases, including grid-connected and islanded situations, using the swing equation with inner current and voltage outer loops. Analysis of the simulation results in MATLAB/Simulink demonstrates that active and reactive power are independently controlled under the grid-imposed mode, voltage and frequency are controlled under the islanded mode, and frequency stability of the system is enhanced by the virtual inertia emulation using swing equation. On this basis, it is recommended that the swing equation-based approach is incorporated with the current and voltage control loops to achieve better protection under over-current conditions. Further works are required to discover other factors that could improve the effectiveness of the models

Research on microgrids at the University of Malta

This article presents some of the work done in recent years by the microgrids research team at the Department of Industrial Electrical Power Conversion (IEPC). Research activities are dedicated towards enabling secure, reliable, and carbon free electricity systems. To date, the main contributions by the department were made to the operation, control and management of microgrids in low voltage (LV) distribution networks, ship electrification (shipboard microgrids) and low voltage DC microgrids. The paper also presents a few of the significant results achieved by the department to date including a hierarchical control architecture for single phase microgrids, control algorithms of power electronic converters for AC and DC microgrids, energy and power management strategies, power quality improvement algorithms and technologies, demand response strategies and devices, and the effective integration of renewables and energy storage systems.peer-reviewe

Voltage and frequency regulation to support synchronous generators operation by grid feeding distributed energy resources

Research on new grid topologies and control configurations to support distributed energy resources is being carried out in order to improve electric service reliability and better power quality to the end consumer. Besides, due to more restrictive environmental policies and economical incentives for the deployment of new renewable energy resources, the energetic scenario seems to be moving towards a more sustainable one. With the increasing proliferation of renewable energies and distributed energy resources, however, the challenges that future grids will have to confront can only escalate. Before dealing with these new challenges, it is first necessary to fully comprehend how a standard grid is regulated and to embrace the fundamentals on grid operation and management from a technical perspective. By understanding how current grids function, the effect of these new actors on the grid namely distributed energy resources can be isolated and addressed either individually as a new phenomenon never encountered before or extrapolated from a well-known challenge of the mains. In this thesis, the operating of the standard grid is depicted together with these forthcoming technologies such as microgrids and distributed energy resources. The synchronous generator together with its regulator and its excitation system prove to be key actors in terms of frequency and voltage regulation thus special emphasis is given to them. Simulations regarding the control of the synchronous generator and its influence on the grid stability are performed to support the many literature that attribute the synchronous generator as the par excellence regulator of the grid. Finally, the interaction between an inverter-based distributed generation and a diesel-based distributed generation is studied to identify its effects on both the dynamic response of the grid and its stability. The realized simulations provide scenarios in which to test the importance of the synchronous generation inasmuch as the regulation of the grid is concerned. In addition, the introduction of an inverter-based distributed generation in the simulations is particularly interesting to present the benefits that the support from distributed generation on the grid can bring about

Design and Control of Virtual Synchronous Machine Based Energy Systems

Conventionally, the operation and stability of power systems have been governed by the dynamics of large synchronous generators (SGs) which provide the inertial support required to maintain the resilience and stability of the power system. How-ever, the commitment of the UK to drive a zero-carbon economy is accelerating the integration of renewable energy sources (RESs) into the power system. Since the dynamics and operation of RESs differs from SGs, the large-scale integration of RESs will significantly impact the control and stability of the power system.This thesis focuses on the design of grid-friendly control algorithms termed virtual synchronous machines (VSMs), which mimic the desirable characteristics of SGs. Although several VSM topologies have been proposed in literature, most of them require further modifications before they can be integrated into the grid. Hence, a novel VSM algorithm for permanent magnet synchronous generator based wind turbines has been proposed in this thesis.The proposed VSM performs seamlessly in all operating modes and enables maxi-mum power point tracking in grid-connected operation (assuming strong grid), load following power generation in islanded mode and fault ride-through during faults. To ensure optimal performance of the VSM in all operating modes, a comprehensive stability analysis of the VSM was performed in the event of small and large per-turbations. The result of the analysis was used to establish design guidelines and operational limits of the VSM.This thesis further evaluates the impact of VSMs on the power systems low-frequency oscillations (LFOs). A detailed two-machine test-bed was developed to analyze the LFOs which exists when VSMs replace SGs. The characteristics of the LFO modes and the dominant states was comprehensively analyzed. The LFO modes which exists in an all-VSM grid was also analyzed. Further, the role of the power system stabilizers in an all-VSM grid was comprehensively evaluated. An IEEE benchmark two-area four-machine system was employed to validate the results of the small-signal analysis.The analysis and time-domain simulations in this thesis were performed in the MAT-LAB/SIMULINK environment

Voltage-based droop control of converter-interfaced distributed generation units in microgrids

Sinds de laatste jaren is er in het elektrisch energienet een enorme toevloed aan kleine decentrale generatoren, vaak op basis van hernieuwbare energiebronnen. De distributienetten werden echter niet gebouwd om injectie van energie toe te laten. Hierdoor komen steeds meer problemen in de distributienetten voor, zoals bijvoorbeeld overspanningen tijdens zonnige periodes. Dit bemoeilijkt de verdere integratie van hernieuwbare energiebronnen. In deze context werd het microgrid concept voorgesteld om een gecoordineerde koppeling van decentrale generatoren in het net mogelijk te maken. Microgrids zijn kleine subnetten die lokaal hun elementen, zoals de generatoren en de lasten regelen om bepaalde doeleinden te bereiken. Ze kunnen bijvoorbeeld de spanningsregeling in hun net verzorgen of als een geheel meespelen in de energiemarkten. Een karakteristiek van microgrids is dat ze onafhankelijk van het net kunnen werken, in het zogenaamde eilandbedrijf. In eilandbedrijf moeten het verbruik en de opwekking op ieder tijdstip op elkaar afgesteld zijn. Aangezien microgrids erg verschillende eigenschappen hebben van het gewone elektrisch net, zijn hier specifieke regelstrategieen voor vereist. In deze doctoraatsverhandeling wordt een dergelijke regelstrategie uitgewerkt, de zogenaamde spanningsgebaseerde droop (proportionele) regeling. Het spanningsniveau wordt als de niet-conventionele parameter gebruikt om het microgrid te regelen

Development of Robust and Dynamic Control Solutions for Energy Storage Enabled Hybrid AC/DC Microgrids

Development of Robust and Dynamic Control Solutions for Energy Storage Enabled Hybrid AC/DC Microgrid

Power quality improvement utilizing photovoltaic generation connected to a weak grid

Microgrid research and development in the past decades have been one of the most popular topics. Similarly, the photovoltaic generation has been surging among renewable generation in the past few years, thanks to the availability, affordability, technology maturity of the PV panels and the PV inverter in the general market. Unfortunately, quite often, the PV installations are connected to weak grids and may have been considered as the culprit of poor power quality affecting other loads in particular sensitive loads connected to the same point of common coupling (PCC). This paper is intended to demystify the renewable generation, and turns the negative perception into positive revelation of the superiority of PV generation to the power quality improvement in a microgrid system. The main objective of this work is to develop a control method for the PV inverter so that the power quality at the PCC will be improved under various disturbances. The method is to control the reactive current based on utilizing the grid current to counteract the negative impact of the disturbances. The proposed control method is verified in PSIM platform. Promising results have been obtaine

Control strategy of grid connected power converter based on virtual flux approach

A la portada consta el nom del programa interuniversitari: Joint Doctoral Programme in Electric Energy Systems [by the] Universidad de Málaga, Universidad de Sevilla, Universidad del País Vasco/Euskal Erriko Unibertsitatea i Universitat Politècnica de CatalunyaDistributed Generation (DG) provides an alternative to the Centralized Generation (CG) by means of generating electricity near to the end user of power with the employment of small-scale technologies to produce electricity, mainly using Renewable Energy Sources (RES). The prospects of renewable energy integration during the next years are still very optimistic. This PhD dissertation is made to provide an alternative control framework for the grid connected power converter by adopting the virtual flux concept in the control layer. This dissertation can be divided into three main topics. The 1st topic presents the voltage sensorless control system for the grid-connected power converter. The control system presented is done without depending on AC-voltage measurement where the grid synchronization is based on the Virtual Flux (VF) estimation. In this regard, the Frequency Locked Loop (FLL) is used in conjunction with the estimation scheme to make the system fully adaptive to the frequency changes. This voltage sensorless application is useful for reducing cost and complexity of the control hardware. It is also can be utilized in case of limited reliability or availability of voltage measurements at the intended point of synchronization to the grid. Considering that most previous studies are based on the VF estimation for the case of power converter connected to the grid through the L-filter or LC-filter, this dissertation is focused on the power converter connected to the grid through the LCL filter. The Proportional Resonant (PR) current controller is adopted in the inner loop control of the power electronics-based converter to test the performance of such system. Another control method based on VF synchronization that permits to control the active and reactive power delivery in a remote point of the grid is also presented in this dissertation. This is due to the fact that the VF is implemented that the voltage in a remote point of the line can be estimated. As it will be shown in simulations and experiments, the proposed control scheme provides a good tracking and dynamic performance under step changes in the reference power. The fast synchronization and the smooth reference tracking achieved in transient conditions have demonstrated the effectiveness of the Dual Second Order Generalized Integrator controlled as Quadrature Signal Generator (DSOGI-QSG) and also the current controller used in the proposed system. In addition to the power control itself, this study could also benefit the frequency and the voltage regulation methods in distributed generation applications as for instance in microgrid. Considering the fact that the grid connected power converter can be controlled as a virtual synchronous generator where the flux is a variable to be used for controlling its operation, this dissertation also presents a Virtual Synchronous Flux Controller (VSFC) as a new control framework of the grid connected power converter. In this regard, a new control strategy in the inner loop control of the power converter will be proposed. The main components of the outer loop control of VSFC are based on the active and reactive power control. The results presented show that the VSFC works well to control the active and reactive power without considering any synchronization system. The inner loop control is able to work as it is required, and the measurement flux is able to track the reference flux without any significant delays. All the work presented in this dissertation are supported by mathematical and simulation analysis. In order to endorse the conclusions achieved, a complete experimental validations have been conducted before wrapping this dissertation with a conclusion and recommendation for future enhancement of the control strategies that have been presented.Postprint (published version