Reference picture selection using checkerboard pattern for resilient video coding

The improved compression efficiency achieved by the High Efficiency Video Coding (HEVC) standard has the counter-effect of decreasing error resilience in transmission over error-prone channels. To increase the error resilience of HEVC streams, this paper proposes a checkerboard reference picture selection method in order to reduce the prediction mismatch at the decoder in case of frame losses. The proposed approach not only allows to reduce the error propagation at the decoder, but also enhances the quality of reconstructed frames by selectively constraining the choice of reference pictures used for temporal prediction. The underlying approach is to increase the amount of accurate temporal information at the decoder when transmission errors occur, to improve the video quality by using an efficient combination of diverse motion fields. The proposed method compensates for the small loss of coding efficiency at frame loss rates as low as 3%. For a single frame-loss event the proposed method can achieve up to 2 dB of gain in the affected frames and an average quality gain of 0:84 dB for different error prone conditions

Transmission of multiple description and layered video over an EGPRS wireless network

We investigate the ability of multiple descriptions (MD) and layered coding to improve the quality of video transmitted over EGPRS networks. One-layer video sent over a single channel on such a network has a fairly sharp quality transition, depending on a user’s location. Either the video can be transmitted reliably (if the video rate is less than or equal to what the channel can sustain), or it is subjected to many lost packets. In this system, MD and layered video may offer two ways to improve video quality beyond that of the one-layer video. First, each sub-stream can be sent on a separate channel, essentially doubling the assigned bandwidth and increasing video quality. Second, MD and layered video are more error resilient than one-layer video, potentially improving the video quality seen by users in poor locations. We find that for the system scenarios considered, one- and two-layer coding outperform MD coding, depending upon the number of wireless channels used for the video transport. 1

Reference picture selection using checkerboard pattern for resilient video coding

The improved compression efficiency achieved by the High Efficiency Video Coding (HEVC) standard has the counter-effect of decreasing error resilience in transmission over error-prone channels. To increase the error resilience of HEVC streams, this paper proposes a checkerboard reference picture selection method in order to reduce the prediction mismatch at the decoder in case of frame losses. The proposed approach not only allows to reduce the error propagation at the decoder, but also enhances the quality of reconstructed frames by selectively constraining the choice of reference pictures used for temporal prediction. The underlying approach is to increase the amount of accurate temporal information at the decoder when transmission errors occur, to improve the video quality by using an efficient combination of diverse motion fields. The proposed method compensates for the small loss of coding efficiency at frame loss rates as low as 3%. For a single frame-loss event the proposed method can achieve up to 2 dB of gain in the affected frames and an average quality gain of 0:84 dB for different error prone conditions

Error Correction and Concealment of Bock Based, Motion-Compensated Temporal Predition, Transform Coded Video

Error Correction and Concealment of Block Based, Motion-Compensated Temporal Prediction, Transform Coded Video David L. Robie 133 Pages Directed by Dr. Russell M. Mersereau The use of the Internet and wireless networks to bring multimedia to the consumer continues to expand. The transmission of these products is always subject to corruption due to errors such as bit errors or lost and ill-timed packets; however, in many cases, such as real time video transmission, retransmission request (ARQ) is not practical. Therefore receivers must be capable of recovering from corrupted data. Errors can be mitigated using forward error correction in the encoder or error concealment techniques in the decoder. This thesis investigates the use of forward error correction (FEC) techniques in the encoder and error concealment in the decoder in block-based, motion-compensated, temporal prediction, transform codecs. It will show improvement over standard FEC applications and improvements in error concealment relative to the Motion Picture Experts Group (MPEG) standard. To this end, this dissertation will describe the following contributions and proofs-of-concept in the area of error concealment and correction in block-based video transmission. A temporal error concealment algorithm which uses motion-compensated macroblocks from previous frames. A spatial error concealment algorithm which uses the Hough transform to detect edges in both foreground and background colors and using directional interpolation or directional filtering to provide improved edge reproduction. A codec which uses data hiding to transmit error correction information. An enhanced codec which builds upon the last by improving the performance of the codec in the error-free environment while maintaining excellent error recovery capabilities. A method to allocate Reed-Solomon (R-S) packet-based forward error correction that will decrease distortion (using a PSNR metric) at the receiver compared to standard FEC techniques. Finally, under the constraints of a constant bit rate, the tradeoff between traditional R-S FEC and alternate forward concealment information (FCI) is evaluated. Each of these developments is compared and contrasted to state of the art techniques and are able to show improvements using widely accepted metrics. The dissertation concludes with a discussion of future work.Ph.D.Committee Chair: Mersereau, Russell; Committee Member: Altunbasak, Yucel; Committee Member: Fekri, Faramarz; Committee Member: Lanterman, Aaron; Committee Member: Zhou, Haomi

Research and developments of Dirac video codec

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video data over the bandwidth limited erroneous channels is another important issue. To enable a video codec for broadcasting application, it is required to implement the corresponding coding tools (e.g. error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and hence their specifications are not defined in the standard. In Dirac as well, the original codec is optimized for storage purpose only and so, several non-normative part of the encoding tools are still required in order to be able to use in other types of application. Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient coding method used here is a simple and low complex coding scheme which provides the error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet erasure wired network. The scheme combines source and channel coding approach where error-resilient source coding is achieved by data partitioning in the wavelet transformed domain and channel coding is achieved through the application of either Rate-Compatible Punctured Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the Internet broadcasting application. But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the 2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the optimum QF of the current encoding frame for a given target bitrate, R. In some applications like video conferencing, real-time encoding and decoding with minimum delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder is the most time consuming stage. So, reducing the complexity of the motion estimation stage will certainly give one step closer to the real-time application. So, as a partial contribution toward realtime application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of motion estimation. The same strategy was implemented in both Dirac and H.264 in order to investigate its performance on different codecs. Together with this fast ME strategy, a method which is called partial cost function calculation in order to further reduce down the computational load of the cost function calculation was presented. The calculation is based upon the pre-defined set of patterns which were chosen in such a way that they have as much maximum coverage as possible over the whole block. In summary, this research work has contributed to the error-resilient transmission of compressed bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this, the final phase of the research has partially contributed toward the real-time application of the Dirac video codec by implementing a fast motion estimation strategy together with partial cost function calculation idea.BBC R&D and Brunel University

Multiple Description H.264 Video Coding with Redundant Pictures

Multiple description coding (MDC) o®ers a competitive so- lution for video transmission over lossy packet networks, with a graceful degradation of the reproduced quality as the loss rate increases. This paper illustrates how redundant pictures, an error resilience tool included in H.264/AVC, can be employed in conjunction with multiple state video coding scheme, previously proposed in the literature. The proposed MDC solution is shown to provide superior perfor- mance to state-of-the-art techniques, in terms of improved average luma peak-signal-to-noise-ratio (PSNR), fewer tem- poral °uctuations in the picture quality, and improved ro- bustness to bad estimation of the loss probability in the network

Seminario sullo Standard MPEG-4: utilizzo ed aspetti implementativi

Una delle tecnologie chiave che hanno permesso il grande sviluppo della televisione digitale è la compressione video. La tecnologia di codifica video nota come MPEG-2, sviluppata nei primi anni novanta, è diventata lo standard di trasmissione DTV (Digital TV) sia satellitare sia terrestre in quasi tutti i paesi del mondo. Da allora la velocità dei microprocessori e le capacità di memoria dei dispositivi hardware per la codifica e la decodifica sono migliorate significativamente rendendo possibile lo sviluppo e l’implementazione di algoritmi di codifica innovativi in grado di abbattere significativamente i limiti di compressione dello standard MPEG-2. Tali innovazioni, sfociate nel 2003 nello standard MPEG-4 AVC (Advanced Video Coding), non hanno permesso di mantenere la compatibilità all’indietro con l’MPEG-2, e questo ha inizialmente costituito un limite alla loro introduzione nei sistemi di trasmissione DTV. Tuttavia, negli ultimi anni la codifica MPEG-4 AVC si è diffusa rapidamente, è stata adottata dal progetto DVB, recentemente dall’ATSC, ed è lo standard di codifica nell’IPTV. L’obiettivo di questo seminario, che si articola in due giornate, è quello di presentare lo standard di codifica MPEG-4 AVC con particolare attenzione agli aspetti implementativi del livello di codifica video.2008-11-18Sardegna Ricerche, Edificio 2, Località Piscinamanna 09010 Pula (CA) - ItaliaSeminario sullo Standard MPEG-4: utilizzo ed aspetti implementativ

3D multiple description coding for error resilience over wireless networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Mobile communications has gained a growing interest from both customers and service providers alike in the last 1-2 decades. Visual information is used in many application domains such as remote health care, video –on demand, broadcasting, video surveillance etc. In order to enhance the visual effects of digital video content, the depth perception needs to be provided with the actual visual content. 3D video has earned a significant interest from the research community in recent years, due to the tremendous impact it leaves on viewers and its enhancement of the user’s quality of experience (QoE). In the near future, 3D video is likely to be used in most video applications, as it offers a greater sense of immersion and perceptual experience. When 3D video is compressed and transmitted over error prone channels, the associated packet loss leads to visual quality degradation. When a picture is lost or corrupted so severely that the concealment result is not acceptable, the receiver typically pauses video playback and waits for the next INTRA picture to resume decoding. Error propagation caused by employing predictive coding may degrade the video quality severely. There are several ways used to mitigate the effects of such transmission errors. One widely used technique in International Video Coding Standards is error resilience. The motivation behind this research work is that, existing schemes for 2D colour video compression such as MPEG, JPEG and H.263 cannot be applied to 3D video content. 3D video signals contain depth as well as colour information and are bandwidth demanding, as they require the transmission of multiple high-bandwidth 3D video streams. On the other hand, the capacity of wireless channels is limited and wireless links are prone to various types of errors caused by noise, interference, fading, handoff, error burst and network congestion. Given the maximum bit rate budget to represent the 3D scene, optimal bit-rate allocation between texture and depth information rendering distortion/losses should be minimised. To mitigate the effect of these errors on the perceptual 3D video quality, error resilience video coding needs to be investigated further to offer better quality of experience (QoE) to end users. This research work aims at enhancing the error resilience capability of compressed 3D video, when transmitted over mobile channels, using Multiple Description Coding (MDC) in order to improve better user’s quality of experience (QoE). Furthermore, this thesis examines the sensitivity of the human visual system (HVS) when employed to view 3D video scenes. The approach used in this study is to use subjective testing in order to rate people’s perception of 3D video under error free and error prone conditions through the use of a carefully designed bespoke questionnaire.Petroleum Technology Development Fund (PTDF

Shape representation and coding of visual objets in multimedia applications — An overview

Emerging multimedia applications have created the need for new functionalities in digital communications. Whereas existing compression standards only deal with the audio-visual scene at a frame level, it is now necessary to handle individual objects separately, thus allowing scalable transmission as well as interactive scene recomposition by the receiver. The future MPEG-4 standard aims at providing compression tools addressing these functionalities. Unlike existing frame-based standards, the corresponding coding schemes need to encode shape information explicitly. This paper reviews existing solutions to the problem of shape representation and coding. Region and contour coding techniques are presented and their performance is discussed, considering coding efficiency and rate-distortion control capability, as well as flexibility to application requirements such as progressive transmission, low-delay coding, and error robustnes